Free4Torrent 300-615 Dumps PDF - 100% Passing Guarantee
300-615 Braindumps Real Exam Updated on Jan 05, 2022 with 99 Questions
Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam Certification Path
The Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure exam certification path includes only one certification exam. There are two major types of resources for the study of certification exams first there are the study guides and therefore the books that are elaborated and appropriate for building knowledge from the ground up then there are video tutorial and lectures that may make study quite interesting nonetheless these demand time and concentration from the learner. Smart candidates who wish to create a solid foundation altogether examination topics and connected technologies typically mix video lectures with study guides to reap the advantages of each but 300-615 practice test or practice exam engines is one important study tool which goes typically unnoted by most candidates. 300-615 practice exams are designed with our experts to make exam prospects test their knowledge on skills attained in the course, as well as prospects become comfortable and familiar with the real exam environment. Statistics have indicated exam anxiety plays a much bigger role in students failure in the exam than the fear of the unknown. Free4Torrent expert team recommends preparing some notes on these topics along with it don’t forget to practice 300-615 dumps which been written by our expert team, each of these can assist you loads to clear this exam with excellent marks.
Exam Topics Overview
There are five exam domains covered in Cisco 300-615. Each domain carries a different weightage and tries to educate the test-taker with different skill sets.
- Management and Operations
The last exam domain is focused on the management and operations required for effective troubleshooting. It covers 20% of exam structure. Topics like troubleshooting firmware upgrades, integration of centralized management, and interoperability along with network security are included in it.
- Compute Platform
Another 25% of the exam syllabus is covered with this section. When going through it, the test-taker should know about viable ways to troubleshoot the Cisco Unified Computing System rack servers as well as blade chassis. The learning further extends as this domain throws light on the key infrastructure, networking, storage, and connectivity concepts. Firmware, converged network adaptors, hardware interoperability, I/O modules, and fabric interconnects are observed in this module as well.
- Storage Network
This domain is all about key troubleshooting techniques for Fibre Channel and FCoE Cisco Unified Fabric. The candidates should be able to effortlessly work with VSAN, device alias, zoning, FCID, Cisco Fabric Services, switched fabric channel, and many other concepts diligently. This section takes about 15% of the total exam structure.
- Network
This domain carries a 25% weightage of the exam content. Its pivotal focus is on the topics like key troubleshooting technologies used for routing protocols, including PIM, FHRP, MP-BGP, and many others. Also, the candidates have to learn what all it takes to troubleshoot the application-centric infrastructure, which involves the understanding of the concepts like VMM domain integration, external connectivity, tenant policies, access policies, fabric discovery, and packet flow. Skills in solving problems with overlay and switching protocols are needed too.
- Automation
The second last exam domain is also accountable for the 15% exam syllabus. It is focused on assessing one’s skills needed to efficiently troubleshoot automation and scripting tools along with programmability. The applicants should be familiar with EEM, Scheduler, Bash shell, guest shell for NX-OS, REST API, and JSON in detail before the real exam.
Port security and fabric binding, RBAC and AAA, DHCP snooping, port security, first-hop security, troubleshooting CoPP and ACI domains, and key management are other most discussed concepts. Before this section ends, it talks about storage security troubleshooting concepts like port security and fabric ending, and data center compute security.
NEW QUESTION 29
Refer to the exhibit.
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
- A. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
- B. Configure the upstream ports and the server ports to be in VSAN 100.
- C. Update the FCNs database to contain names for VSAN 100.
- D. Activate the correct zoneset for VSAN 100.
Answer: B
NEW QUESTION 30
Refer to the exhibit.
An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Adjust the MTU on Router-A to 1600.
- B. Disable the check of the MTU value.
- C. Adjust the MTU on Router-B to 1604.
- D. Set the OSPF media type to point-to-point.
Answer: B
NEW QUESTION 31 
Refer to the exhibit. An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Include specific users into MDS role configuration.
- B. Configure SSH logins on Cisco MDS switch.
- C. Integrate Cisco MDS with Microsoft Active Directory.
- D. Configure the role name to match the group name on Microsoft Active Directory.
Answer: D
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 32
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" indicates that no service graph is in use for this interface.
- B. The interface policy is misconfigured.
- C. The interface is working correctly and fully operational, but it is not in use.
- D. "out-of-service" is the default interface status in ACI.
Answer: B
NEW QUESTION 33
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure HSRP version 2.
- B. Set the MTU to 1500 bytes.
- C. Configure the same HSRP group on both devices.
- D. Enable IP redirects.
Answer: D
NEW QUESTION 34
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. event policy-default count 1 time 100
- B. event syslog occurs 10
- C. action 2.0 event-default
- D. event cli match 'configure terminal'
Answer: C
NEW QUESTION 35
Refer to the Exhibit.
An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?
- A. Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.
- B. Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- C. Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- D. Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.
Answer: D
NEW QUESTION 36
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 37
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the software-telemetry feature
- B. Disable the inband-telemetry feature
- C. Disable the hardware-telemetry feature
- D. Disable the telemetry feature
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION 38
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN.
The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected.
However, the Linux hosts fail to boot. Which action resolves the issue?
- A. Remove all of the local storage that is installed.
- B. Delete and reconfigure the pWWN of the SAN boot target.
- C. Delete and reconfigure the boot LUN.
- D. Remove all of the ISO images that are mounted as a virtual CD-ROM.
Answer: A
Explanation:
Section: Storage Network
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/configuring_server_boot.pdf page 5
NEW QUESTION 39
Refer to the exhibit.
After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)
- A. Configure the local vPC role priority to have the same value as Switch-A.
- B. Disable and then re-enable the vPC peer link.
- C. Configure the local vPC role priority to have a lower value than Switch-A.
- D. Disable and then re-enable the vPC peer-keepalive link.
- E. Configure the local vPC role priority to have a higher value than Switch-A.
Answer: B,E
NEW QUESTION 40
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 41
An engineer is implementing a storage VDC, but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)
- A. M-Series module
- B. STORAGE-ENT license
- C. ESSENTIALS license
- D. F-Series module
- E. FCoE license
Answer: D,E
NEW QUESTION 42
Refer to the exhibit.
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
- A. Reboot the switch
- B. Reboot the guestshell
- C. Resync the database
- D. Recreate the guestshell
Answer: B
NEW QUESTION 43
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Server Firmware, then Install Infrastructure Firmware
- B. Install infrastructure Firmware, then Install Hypervisor Firmware.
- C. Install Hypervisor Firmware, then Install Infrastructure Firmware
- D. Install Infrastructure Firmware, then Install Server Firmware.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 44
Refer to the exhibits.
An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server Which set of actions resolves this problem?
- A. Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration
- B. Assign native VLAN 10 with fc2.'l - 2 and allow VLAN 10 in trunk configuration.
- C. Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.
- D. Bind native VLAN 10 with Ethemet1/10 and allow VSAN 101 in trunk configuration.
Answer: D
NEW QUESTION 45
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 46
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Set the distribute policy of the zone to full.
- B. Change the name of one of the zones to match the other zone set.
- C. Ensure that the zone members have different names.
- D. Import or export a zone set between the switches to synchronize the switches.
Answer: D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pd
NEW QUESTION 47
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. event statement
- B. configure terminal action
- C. event-default action statement
- D. environment variable
Answer: A
NEW QUESTION 48
Refer to the exhibit.
An upgrade operation fails with an error displayed. Which action resolve the issue?
- A. Allocate extra space on a flash drive to extract a system image
- B. Allocate extra space on a flash drive to extract a kickstart image
- C. Use a different kickstart image
- D. Use a different system image
Answer: D
Explanation:
Explanation
Kickstart image verification succeeded. System image has failed.
NEW QUESTION 49
Refer to the exhibit.
The vPC between switch1 and switch2 does not work. Which two actions resolve the problem? (Choose two.)
- A. Configure one of the switches as primary for the vPC.
- B. Correct the configuration of the vPC peer link and the vPC peer keepalive.
- C. Configure the IP address on the interface.
- D. Match the vPC domain ID between the two devices.
- E. Activate VLANs on the vPC.
Answer: B,D
Explanation:
Explanation
Both "vPC peer link" and "Peer keepalive link" are down. So, D is correct.
SW1 is using vPC domain ID 500, which SW2 is using 20. They must match. So, E is correct.
NEW QUESTION 50
Refer to the exhibit.
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
* WAN-1 is for normal business-day activities.
* WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
- A. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
- B. The event timer must be written in epoch time format.
- C. The applet called "Backup" must include an action to remove the current static route.
- D. The Cron entry must be configured without double quotes.
Answer: C
NEW QUESTION 51
Refer to the exhibit.
Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
- B. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- C. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- D. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
Answer: A
NEW QUESTION 52
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 53
An engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?
- A. Enable PFC.
- B. Enable LLDP.
- C. Enable ETS
- D. Enable Cisco Discovery Protocol.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION 54
......
How much Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam Cost
The price of the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure exam is USD 299, for more information please visit official website because of rates of the courses changes based on countries.
300-615 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.free4torrent.com/300-615-braindumps-torrent.html
Latest 300-615 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1MQq7CQZi8NiUXyXlroVqWQb_coCSL_8C