100% Pass Your S1000-007 Exam Dumps at First Attempt with Free4Torrent
Penetration testers simulate S1000-007 exam PDF
To pass the IBM S1000-007 exam, candidates need to have a deep understanding of AIX v7 and its components. They should be able to troubleshoot problems, configure systems, and optimize performance. Candidates should also be familiar with common AIX v7 tools and utilities, as well as industry standard practices in system administration.
NEW QUESTION # 24
An administrator finds that their development server has crashed and an error code 554 is displayed. They know that this error is typically associated with a problem executing varyon rootvg and they should boot from AIX Media to be able to perform maintenance tasks. When the administrator checks the crontab of the NIM server, they find that a mksysb image is created each night.
Can the administrator use this mlcsysb to boot the server and perform the required maintenance tasks?
- A. Yes, but they may need to create a machine resource first.
- B. No, because they need to use the original AIX installation media for that server.
- C. No, because mksysb is not bootable.
- D. Yes, but they may need to create a spot first.
Answer: C
NEW QUESTION # 25
An administrator has a test server (my host) that uses local name resolution. The administrator arrives late one morning and finds that their co-worker was asked to make some changes to the IP address of the server.
The co-worker used SMIT from the console, but then when testing from the console, the following command fails:
ping my_host
Why did the ping fail?
- A. They used an incorrect gateway address.
- B. They didn't reboot the server.
- C. They didn't update the DNS entry.
- D. They didn't update /etc/hosts after mktcpip was run.
Answer: D
NEW QUESTION # 26
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- B. On DBServer run the command /usr/sbin/f tpd.
- C. On DB_Server run command startsrc -t ftp.
- D. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- E. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
Answer: A
NEW QUESTION # 27
Which file starts the System Resource Controller?
- A. /etc/rc.local
- B. /etc/inittab
- C. /etc/rc.d/rc.2
- D. /etc/rc.srcmstr
Answer: D
Explanation:
The System Resource Controller (SRC) is the main process that starts other background processes when the system boots. It is started through the /etc/rc.srcmstr script which is run by the init process. This script reads the /etc/inittab file and starts the necessary processes. Reference: IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 28
A system administrator includes the values RES TIMEOUT=1 and RES_RETRY=1 in the /etc/environment file. What is the effect of this change?
- A. It reduces the failover time to the secondary NTP Server when the first NTP Server is unavailable.
- B. It causes ssh connections to disconnect after 1 minute of no activity.
- C. It avoids NFS mounts appearing to be hung or stalled indefinitely when there are network outages.
- D. It reduces the failover time to the secondary name server when the first name server is not reachable.
Answer: C
NEW QUESTION # 29
Which command should be used to perform a graceful shutdown and reboot of an AIX LPAR?
- A. reboot
- B. halt
- C. shutdown
- D. bosboot
Answer: C
NEW QUESTION # 30
What are three states a device can have when connected to an AIX system?
- A. Available
- B. Suspended
- C. Running
- D. Defined
- E. Stopped
- F. Blocked
Answer: A,D,E
Explanation:
Explanation
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining adevice in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
NEW QUESTION # 31
What is a benefit of using mksysb to backup a system?
- A. The image contains a backup of all volume groups and logical volumes.
- B. The image contains a backup of all file systems.
- C. The image contains a backup of all application and user data.
- D. The image can be used to restore the rootvg volume group of the system.
Answer: C
NEW QUESTION # 32
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- B. On DBServer run the command /usr/sbin/f tpd.
- C. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- D. On DB_Server run command startsrc -t ftp.
- E. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
Answer: A,E
NEW QUESTION # 33
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. oem_setup_env
- B. mkrep
- C. mJcvdev
- D. mlcvterm
Answer: C
NEW QUESTION # 34
A customer runs smit on the AIX command line and receives the message below:
1800-005 SMIT requires a minimum of 24 line by 80 column output display.
What can be done to resolve the error?
- A. Make sure they are running as the root user.
- B. Change their DISPLAY environment variable.
- C. Resize their window.
- D. Set the TERM variable to smit.
Answer: C
Explanation:
The root user is not required to run SMIT, and the size of the window is the only factor that determines the minimum output display requirements. According to the IBM AIX v7 Administrator Specialty Study Guide (page 9-3), SMIT requires 24 lines and 80 columns for the output display for successful execution.
NEW QUESTION # 35
An IT security department would like to limit root user access to only members of the group called system.
Which command will accomplish this?
- A. cruiser sugroups=system root
- B. chadmin group=system root
- C. chadmin user=root system
- D. chgroup admin=root system
Answer: D
NEW QUESTION # 36
An AIX system is defined as a NIM client with -a connect=shell. The client system is up and running. The client can ping the NIM master, and the master can ping the client. The administrator of the NIM master system attempts to use NIM to install software updates on the NIM client, but receives the error message Permission denied.
What can the administrator of the AIX NIM client do to help resolve the problem?
- A. Check that the root user's .rhosts file has an entry for the NIM master, and that the file permissions are
600. - B. Flush the arp cache and then reboot the client system to ensure the network route table is correct.
- C. Edit the /etc/services file to check the port number used for the nimreg service, then refresh inetd.
- D. Check the firewall configuration and open port 1066 if required.
Answer: C
NEW QUESTION # 37
When the system boots it stops and displays reference code 551. This reference code means the rootvg will not varyon. What is the best way for the administrator to proceed?
- A. Perform a debug boot of AIX and diagnose/fix the problem.
- B. Reinstall AIX or restore from a mksysb.
- C. Perform a maintenance mode boot of AIX and diagnose/fix the problem.
- D. Restart the system.
Answer: C
NEW QUESTION # 38
Which statement is true regarding the snap command?
- A. All options are enabled by default.
- B. The data must be stored in /tmp.
- C. It collects performance related data.
- D. By default, it will check there is enough space where the data is to be stored.
Answer: C
NEW QUESTION # 39
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. rpm
- B. dpkg
- C. installp
- D. yum
Answer: A
NEW QUESTION # 40
When configuring an LPAR profile, what is the meaning of CPU Entitlement?
- A. the number of logical CPUs allocated to an LPAR
- B. the amount of guaranteed CPU time allocated to an LPAR
- C. Simultaneous Multi Threading setting of an LPAR
- D. the count of virtual CPUs configured on an LPAR
Answer: C
NEW QUESTION # 41
An IT security department would like to limit root user access to only members of the group called system. Which command will accomplish this?
- A. chadmin group=system root
- B. chgroup admin=root system
- C. cruiser sugroups=system root
- D. chadmin user=root system
Answer: A
Explanation:
The "chadmin" command can be used to modify the attributes of a user account, including the groups that the user belongs to. The syntax for limiting root user access to members of the group called "system" would be:
sql
chadmin group=system root
This command will add the root user to the "system" group and remove it from any other groups. Members of the "system" group will be the only ones able to access the root account.
NEW QUESTION # 42
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. lppchk: -L -F "fileset level" I grep -v "7200-04"
- B. instfix -i I grep -v 7200-04
- C. lslpp -s -1 7200-04
- D. oslevel -r -1 7200-04
Answer: B
NEW QUESTION # 43
An administrator is tasked with installing an open source package. They are told to use the IBM AIX Toolbox for Linux Applications because the organization wants to be able to open tickets with IBM support.
What should the administrator tell the requester?
- A. IBM offers extended support for open source software and they need to verify entitlement.
- B. IBM offers extended support for open source software that is licensed with the hardware.
- C. IBM offers standard support for open source software that is licensed with the operating system.
- D. IBM offers this open source software as-is.
Answer: A
Explanation:
"IBM provides extended support for open source software installed on AIX systems. The customer must verify entitlement for such packages and must contact IBM Support to open a ticket." Therefore, the administrator should tell the requester that IBM offers extended support for open source software, but they need to verify entitlement before they can open a ticket with IBM Support.
NEW QUESTION # 44
Based on the output from the lparstat command, how many logical processors are configured in the partition?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 45
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. vtmenu
- B. lssyscfg
- C. lsrefcode
- D. mkvterm
Answer: D
NEW QUESTION # 46
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. The PATH variable contains non-existent directories.
- B. A slow NFS mount for their home directory.
- C. Network issues between the user location and the system.
- D. The user's home file system is full.
Answer: A
Explanation:
When a user logs in, the system will process their .profile file which contains the PATH variable. This variable specifies the list of directories that the system will search through to locate executable files. If the PATH variable contains non-existent directories, then it will take longer for the system to process the .profile file, resulting in a slower login experience. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
NEW QUESTION # 47
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. oem_setup_env
- B. mkrep
- C. mJcvdev
- D. mlcvterm
Answer: D
NEW QUESTION # 48
......
All S1000-007 Dumps and Training Courses: https://www.free4torrent.com/S1000-007-braindumps-torrent.html
Help candidates to study and pass the IBM AIX v7 Administrator Specialty Exams hassle-free: https://drive.google.com/open?id=1RKa8mMHenhYM-gGIgECMmv3SCIKLTZB9