130 Exam Questions for 1z0-133 Updated Versions With Test Engine [Q60-Q76]

130 Exam Questions for 1z0-133 Updated Versions With Test Engine

Pass 1z0-133 Exam with Updated 1z0-133 Exam Dumps PDF 2022

Oracle 1z0-133 Exam Syllabus Topics:

NEW QUESTION 60
As the technical lead for your project, you have been asked to recommend a new solution to handle frequently increasing loads on your applications. The Weblogic 12.1.2 domain currently runs with two clusters of three servers with request being filtered and passed by a proxy server that users the round - robin algorithm.
However, the load sometimes exceeds the maximum capacity of all these servers combined but your domain lacks in scalability.
What is the best implementation solution?

• A. Replace the software load balancer with a hardware load balancer.
• B. Tune work managers to optimize work.
• C. Configure dynamic clusters and specify the number of server instances you anticipate at needing at peak load.
• D. Modify the proxy server load balancing algorithm to weight based.
• E. Add a third cluster and spread existing server instances across the clusters.

Answer: C

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 61
You zipped up the domain's config directory on the administration server's machine before making some major configuration changes. You wait to activate after all the changes have been saved. After your changes are in, hinges start failing badly. You want to go back to the old configuration.
What is the best course of action?

• A. Undo the changes you made manually by using the administration console or WLST.
• B. 1. Stop the administration server.2. Extract only the config.xm1 file from the zip file.3. Overwrite config.xm1 on the administration server's machine with this extracted file.4. Restart the administration server.
• C. 1. Stop the administration server. 2. Replace the config directory on the administration server's machine with your backup. 3. Restart the administration server.4. Stop the managed servers on each machine.5.
  Replace the config directory on the machine with your backup.6. Restart the managed servers on the machine.
• D. 1. Stop the administration server.2. Replace the config directory on the administration server's machine with your backup.3. Restart the administration server.

Answer: D

NEW QUESTION 62
Each domain has a directory called servers that contains subdirectories for each server in the domain.
When will the managed1 directory be created?

• A. When the managed1 server is defined in the Configuration WIZARD
• B. When the managed 1server comes up for the first time
• C. When the Administration server comes up for the first time
• D. When the domain is created

Answer: B

NEW QUESTION 63
You are creating a domain by using the configuration Wizard. In the wizard, you select to configure Node
Manager. Under "Node Manager Type, you select "Manual Node Manager setup".
What does this mean?

• A. You must manually copy the Node Manager files generated by the configuration Wizard into Node
  Manager home.
• B. You are using the configuration Wizard to configure a Java -based Node Manager.
• C. The configuration Wizard prompts you to change the default Node Manager configuration values.
• D. You are using the configuration Wizard to configure a script -based Node Manager.
• E. The configuration Wizard bypasses all Node Manager configuration.

Answer: A

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 64
An application fails. The exception Indicates thattheJDEMdata source cannot be found. Identifytwopossiblestepsthatyou canperform to verify the datasource's availability.

• A. Viewthe target server'sJNDItreein theconsole.
• B. VerifytheDependenciesattributeofthe datasource.
• C. LaunchtheJDBC Diagnosticsutility.
• D. Verifythatthe applicationand datasource have the same target.

Answer: B

NEW QUESTION 65
Which two statements are true about WebLogic data sources?

• A. Data sources are bound in the JNDI tree of a server.
• B. Data sources are based on the JMS specification.
• C. A domain requires at least one data source.
• D. Data sources are targeted to a domain.
• E. A data source contains a connection pool.

Answer: A,E

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 66
Which two statements are true about WebLogic data sources? (Choose two.)

• A. Data sources are bound in the JNDI tree of a server.
• B. Data sources are based on the JMS specification.
• C. A domain requires at least one data source.
• D. Data sources are targeted to a domain.
• E. A data source contains a connection pool.

Answer: A,E

NEW QUESTION 67
View the following file excerpt, which configures HTTP session replication:
< session-descriptor >
< persistent-store-type > replicated </persistent-store-type >
</session-descriptor >
From which file is this excerpt taken?

• A. Session.xml
• B. Weblogic -application.xml
• C. Weblogic.xml
• D. Web.xml
• E. Config.xml

Answer: C

NEW QUESTION 68
Which session persistence type is invalid?

• A. async_jdbc
• B. replicated_if_clustered
• C. file
• D. async_memory
• E. replicated
• F. cookie
• G. Async_replicated

Answer: D

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 69
Consider a data source whose inactive Connection Timeout has been set to 60 seconds. You suspect that an application is not returning JDBC connections to this data source. In response, you go to the data source's Monitoring tab in the Administrator Console.
Which of the available columns will confirm your suspicions?

• A. State
• B. Active Connections Current Count
• C. Current Capacity
• D. Connection Delay Time
• E. Leaked Delay Time

Answer: D

NEW QUESTION 70
You are setting up a GridLink Datasource.
What function will help you to seamlessly connect to a dynamic oracle RAC installation

• A. Simple Client access Address Name
• B. Single Client Access name
• C. Single Connection Anonymous Network
• D. Simple Connection Access Node

Answer: B

Explanation:
Explanation/Reference:
References:

NEW QUESTION 71
An application fails. The exception indicates that the JDBC data source cannot be found.
Identify two possible steps that you can perform to verify the data source's availability. (Choose two.)

• A. View the target server's JNDI tree in the console.
• B. Verify that the application and data source have the same target.
• C. Launch the JDBCDiagnostics utility.
• D. Verify the Dependencies attribute of the data source.

Answer: A,B

NEW QUESTION 72
As the technical lead for your project, you have been asked to recommend a new solution to handle frequently increasing loads on your applications. The Weblogic 12.1.2 domain currently runs with two clusters of three servers with request being filtered and passed by a proxy server that users the round -robin algorithm.
However, the load sometimes exceeds the maximum capacity of all these servers combined but your domain lacks in scalability.
What is the best implementation solution?

• A. Replace the software load balancer with a hardware load balancer.
• B. Tune work managers to optimize work.
• C. Configure dynamic clusters and specify the number of server instances you anticipate at needing at peak load.
• D. Modify the proxy server load balancing algorithm to weight based.
• E. Add a third cluster and spread existing server instances across the clusters.

Answer: C

NEW QUESTION 73
Which two statements are true about WebLogic data sources? (Choose two.)

• A. Data sources are bound in the JNDI tree of a server.
• B. Data sources are based on the JMS specification.
• C. A domain requires at least one data source.
• D. Data sources are targeted to a domain.
• E. A data source contains a connection pool.

Answer: A,E

Explanation:
Explanation/Reference:

NEW QUESTION 74
You are running WebLogic Server under a 64-bit HotSpot JVM.
You edit your domain's setDomainEnc.sh script to update the minimum and maximum heap sizes as follows:
USER_MEM_ARGS="-Xms32meg -Xmx150meg"
Export USER_MEM_ARGS
You try to start a managed server by running the domain start script at the command line. The server fails with the message:
Invalid initial heap size: -Xms32meg
Why does the server fail with that message?

• A. The parameter value was entered incorrectly. The correct value is: "-Xms32m -Xmx150m"
• B. The parameter value was entered incorrectly. The correct value is: "-Xms:32meg - Xmx:150meg"
• C. The parameter value was entered incorrectly. You must enter memory parameter values in Kilobytes
• D. For performance reasons, the minimum heap size and maximum heap size should be the same value
• E. The minimum heap size for a 64-bit JVM is 64 Megabytes

Answer: A

NEW QUESTION 75
During a performance test, a server's log includes several out of memory error messages. You are using the Administration console.
How can you verify the amount of available heap in the server?

• A. Click the server 's Debug > Heap tab.
• B. Click the server 's Monitoring >performance tab.
• C. Click the server's Monitoring >Health tab.
• D. Click the server's Debug >Health tab.
• E. Click the server's Monitoring > Threads tab.

Answer: B

NEW QUESTION 76
......

1z0-133 Exam Dumps - Free Demo & 365 Day Updates: https://www.free4torrent.com/1z0-133-braindumps-torrent.html