200-301 Practice Exam Tests Latest Updated on May-2024
Pass 200-301 Exam in First Attempt Guaranteed Dumps!
NEW QUESTION # 133
Refer to the exhibit.
For security reasons, automatic neighbor discovery must be disabled on the R5 GiO/1 interface. These tasks must be completed:
* Disable all neighbor discovery methods on R5 interface GiO/1.
* Permit neighbor discovery on R5 interface GiO/2.
* Verify there are no dynamically learned neighbors on R5 interface Gi0/1.
* Display the IP address of R6*s interface Gi0/2.
Which configuration must be used?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 134
Which statement correctly compares traditional networks and controller-based networks?
- A. Only controller-based networks decouple the control plane and the data plane
- B. Only traditional networks natively support centralized management
- C. Only traditional networks offer a centralized control plane
- D. Traditional and controller-based networks abstract policies from device configurations
Answer: A
Explanation:
Explanation
Most traditional devices use a distributed architecture, in which each control plane is resided in a networking device. Therefore they need to communicate with each other via messages to work correctly.In contrast to distributed architecture, centralized (or controller-based) architectures centralizes the control of networking devices into one device, called SDN controller
NEW QUESTION # 135
Refer to the exhibit.
which path is used by the router for internet traffic ?
- A. 0.0.0.0/0
- B. 10.10.13.0/24
- C. 209.165.200.0/27
- D. 10.10.10.0/28
Answer: A
NEW QUESTION # 136
Which type of device can be replaced by the use of subinterfaces for VLAN routing?
- A. Layer 2 switch
- B. router
- C. Layer 2 bridge
- D. Layer 3 switch
Answer: D
NEW QUESTION # 137
Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?
- A. lldp holdtimt
- B. lldp reinit
- C. lldp timer
- D. lldp tlv-select
Answer: D
NEW QUESTION # 138
Drag and drop the AAA terms from the left onto the description on the right.
Answer:
Explanation:
NEW QUESTION # 139
Refer to the exhibit.
R5 is the current DR on the network, and R4 is the BDR. Their interfaces are flapping, so a network engineer wants the OSPF network to elect a different DR and BDR. Which set of configurations must the engineer implement?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION # 140
Refer to the exhibit.
To which device does Router1 send packets that are destined to host 10.10.13.165?
- A. Router2
- B. Router5
- C. Router3
- D. Router4
Answer: C
NEW QUESTION # 141
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 142
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 143
Refer to Exhibit. How does SW2 interact with other switches in this VTP domain?
- A. It forwards only the VTP advertisements that it receives on its trunk ports.
- B. It receives updates from all VTP servers and forwards all locally configured VLANs out all trunk ports
- C. It processes VTP updates from any VTP clients on the network on its access ports.
- D. It transmits and processes VTP updates from any VTP Clients on the network on its trunk ports
Answer: A
Explanation:
The VTP mode of SW2 is transparent so it only forwards the VTP updates it receives to its trunk links without processing them.
NEW QUESTION # 144
Drag and drop the descriptions from the left onto the configuration-management technologies on the right.
Answer:
Explanation:
Explanation
Ansible:- uses SSH for remote device communication- uses YAML for fundamental configuration elements Chef:- uses TCP port 10002 for configuration push jobs- uses Ruby for fundamental configuration elements Puppet:- fundamental configuration elements are stored in a manifest- uses TCP 8140 for communication The focus of Ansible is to be streamlined and fast, and to require no node agent installation.Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.A Puppet piece of code is called a manifest, and is a file with .pp extension.
NEW QUESTION # 145
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION # 146
Router R1 has a static route that is configured to destination network. A directly connected interface is configured with an IP address in the same destination network.
Which statement about R1 is true?
- A. R1 prefers the directly connected interface
- B. R1 refuses to advertise the dynamic route to other neighbors
- C. R1 sends a withdrawal notification to the neighboring router
- D. R1 prefers the static route
Answer: A
NEW QUESTION # 147
Which output displays a JSON data representation?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: Automation and Programmability
Explanation:
JSON data is written as name/value pairs.
A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:
"name":"Mark"
JSON can use arrays. Array values must be of type string, number, object, array, boolean or null. For example:
{
"name":"John",
"age":30,
"cars":[ "Ford", "BMW", "Fiat" ]
}
JSON can have empty object like "taskId":{}
NEW QUESTION # 148
DRAG DROP
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Select and Place:
Answer:
Explanation:
Section: Security Fundamentals
Explanation:
Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough ...
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/106082- wlc-compatibility-matrix.html
NEW QUESTION # 149
Refer to the exhibit.
An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Answer:
Explanation:
NEW QUESTION # 150
......
CCNA Free Certification Exam Material from Free4Torrent with 940 Questions: https://www.free4torrent.com/200-301-braindumps-torrent.html
200-301 Dumps Full Questions - Exam Study Guide: https://drive.google.com/open?id=1Y7UNMLbb6_dkPJ6V5qqqrHasnSnO3O1X