2022 Latest 100% Exam Passing Ratio - JN0-362 Dumps PDF
Pass Exam With Full Sureness - JN0-362 Dumps with 67 Questions
The Juniper JNCIS-SP exam, coded JN0-362 qualifies candidates for the Juniper Networks Certified Internet Specialist - Service Provider certification. It assesses the student’s understanding of routing and switching as part of the implementation of the Junos software.
Certification Details: Juniper Networks Certified Internet Specialist - Service Provider
At the pinnacle of the Juniper Service Provider certification path lies this Juniper Networks Certified Internet Specialist - Service Provider certification. This certificate complements a student’s knowledge of the Juniper Networks technology at the Specialist level. It confirms your capability to manage routing and switching technologies and the relevant skills in configuring platforms alongside troubleshooting. Juniper demands that all candidates aiming for the JNCIS-SP designation must first complete the associate-level Juniper Networks Certified Internet Associate - Junos certificate.
Exam Facts
The Juniper JN0-362 exam brings a total of 65 questions in multiple-choice form. Its duration is 90 minutes and candidates can register for this test through Pearson VUE and take it on the same website. However, there’s no specific way to determine the test results. So, candidates will be graded based on the results they score on a Pass/Fail basis. Juniper reveals the test results immediately after completing the exam and they always recommend solid mastery of the Junos Software Release 19.4 before attempting this test.
NEW QUESTION 23
Click the exhibit.
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
- A. Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
- B. Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
- C. Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
- D. Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
Answer: D
NEW QUESTION 24
What is the purpose of STP BPDUs?
- A. to determine the root-alternate port
- B. to determine the root bridge
- C. to determine the least cost path
- D. to exchange MAC addresses
Answer: C
NEW QUESTION 25
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It decrements the time-to-live (TTL) counter by one in the inner IP header
- B. It creates and adds a new inner IP header with the remote destination device's IP address
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It modifies the source and destination addresses in the inner IP header
Answer: A,C
Explanation:
Explanation/Reference:
NEW QUESTION 26
Click the Exhibit button.
You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?
- A. totally stubby area
- B. backbone area
- C. stub area
- D. not-so-stubby area
Answer: C
NEW QUESTION 27
Click the Exhibit.
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
- A. Type internal
- B. As -override
- C. Export <policy name>
- D. Type external
Answer: A
NEW QUESTION 28
Click the Exhibit button.
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?
- A. 300 ms
- B. 1200 ms
- C. 600 ms
- D. 900 ms
Answer: D
NEW QUESTION 29
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
- B. Routes from 10.3.3.3 are less preferred than the default local preference
- C. Routes from 10.1.1.1 are less preferred than the default local preference
- D. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
Answer: A
NEW QUESTION 30
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 31
Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)
Which configuration statement entered on both routers will achieve this goal?
- A. set interface ge-0/0/2 unit 0 family iso point-to-point
- B. set protocols isis interface ge-0/0/2.0 point-to-point
- C. set protocols isis interface ge-0/0/2.0 no-dis
- D. set interface ge-0/0/2 unit 0 family iso no-dis
Answer: B
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- B. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- C. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- D. The OSPF neighbor will be declared down if three BFD hello packets are missed
Answer: B,D
NEW QUESTION 33
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It decrements the time-to-live (TTL) counter by one in the inner IP header
- B. It creates and adds a new inner IP header with the remote destination device's IP address
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It modifies the source and destination addresses in the inner IP header
Answer: A,C
NEW QUESTION 34
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The third address is not formatted correctly.
- B. The second address is incomplete and not correct.
- C. The first address is complete and correct.
- D. All three addresses are the same.
Answer: C,D
NEW QUESTION 35
Click the Exhibit button.
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/ no-root-port-edit-protocols-stp.html
NEW QUESTION 36
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
- B. The router will analyze the traffic engineering database to determine the best path through the network
- C. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
- D. The router will precalculate a valid path through the network for LSP r1-to-r3
Answer: A
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configuration is for an internal BGP session
- B. The local-address statement is not required for the BGP session to establish correctly
- C. The local-address statement is required for the BGP session to establish correctly
- D. The configuration is for an external BGP session
Answer: A,C
NEW QUESTION 38
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 3
- B. Router 2
- C. Router 1
- D. Router 4
Answer: D
NEW QUESTION 39
What are three ways to configure IPv6 addresses in your network? (Choose three.)
- A. Statically configure your IPv6 addresses.
- B. Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.
- C. Configure your IPv6 addresses using stateless auto configuration.
- D. Configure your IPv6 addresses by assigning your router a prefix list.
- E. Configure your IPv6 addresses by setting up a DHCPv6 server.
Answer: A,C,E
NEW QUESTION 40
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?
- A. These routes are internal Level 1 routes.
- B. These routes are external Level 2 routes.
- C. These routes are internal Level 2 routes.
- D. These routes are external Level 1 routes.
Answer: C
NEW QUESTION 41
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)
- A. Segment large groups of routers into areas.
- B. Change a stub area to NSSA when possible.
- C. Ensure that all routers on a shared segment are configured with a priority value of 0.
- D. Use an interface type of p2p when possible.
Answer: A,D
NEW QUESTION 42
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the multicast address
- B. the link-local address
- C. the loopback address
- D. the statically assigned address
Answer: B
NEW QUESTION 43
Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
- A. The amount of time to detect a link or node failure
- B. The amount of time it takes to ping the gateway on the detour link
- C. The amount of time required to recalculate the best detour
- D. The amount of time required to reroute the traffic onto the detour
Answer: A,D
NEW QUESTION 44
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
- A. fe80::1234:abcd:ef56/64
- B. fe80::1234:abff:fecd:ef56/64
- C. fe8::1234:abff:fecd:ef56/64
- D. fec0::1234:abff:fecd:ef56/64
Answer: A
NEW QUESTION 45
What is required on the egress and ingress devices to transport IPv6 traffic across an IPv4 network?
- A. A 6to 4 tunnel interface
- B. A TE tunnel interface
- C. An IP-IP interface
- D. A GRE tunnel interface
Answer: D
NEW QUESTION 46
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 can only form a single adjacency
- B. Interface ge-3/0/0.0 has a default metric of 10
- C. Interface xe-0/0/0.0 has a default metric of 10
- D. Interface ge-1/0/0.0 can only form a single adjacency
Answer: B
NEW QUESTION 47
......
Verified JN0-362 dumps Q&As - 100% Pass from Free4Torrent: https://www.free4torrent.com/JN0-362-braindumps-torrent.html