2022 Realistic 300-430 Dumps Exam Tips Test Pdf Exam Material
Powerful 300-430 PDF Dumps for 300-430 Questions
Cisco 300-430: Details + Topics
This test is also called Implementing Cisco Wireless Networks or ENWLSI. It is among the concentration exams for CCNP Enterprise that you need to choose from. You select it from a list of tests that also include Cisco 300-410, Cisco 300-415, Cisco 300-420, Cisco 300-425, and Cisco 300-435. The 300-430 exam is offered in English and Japanese only, and you will have 1 hour and 30 minutes to deal with about 60 questions. The expected question formats include testlets, multiple choice, and fill-in-the-blank.
The Cisco 300-430 exam is administered through Pearson VUE and the registration fee is $300. The official passing score is 825 points, so try to earn more than that. If you want to schedule this test, you have to create an account on the Pearson VUE platform and follow the instructions up to the end.
NEW QUESTION 82
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow SNMP traffic only before authentication and block all the traffic.
- B. Allow HTTP traffic only before authentication and block all the traffic.
- C. Allow all the traffic before authentication and intercept HTTPS only.
- D. Allow all the traffic before authentication and intercept HTTP only.
- E. Allow HTTPs traffic only before authentication and block all other traffic.
Answer: D,E
Explanation:
NEW QUESTION 83
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired devices
- B. wired and wireless devices
- C. Cisco certified wireless devices
- D. wireless devices
Answer: B
NEW QUESTION 84
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- B. Configure a second WLC to support half of the APs in the deployment.
- C. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the
5.0-GHz band. - D. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
Answer: A
NEW QUESTION 85
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option D
Note: To enable Local switching, you have to disable central switching - B. Option C
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 86
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
- A. The Cisco CMX server receives SNMP traffic from the WLC.
- B. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
- C. The Cisco CMX server receives NMSP traffic from the WLC.
- D. The Cisco CMX server receives NetFlow data from the WLC.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200907-configuring-and-tro
NEW QUESTION 87
Which two best practices should be considered when a customer wants to purchase and implement Voice over Wireless for Cisco 7925 IP Phones? (Choose two.)
- A. Enable lower data rates for 2.4-GHz data WLAN and higher data rates for phones.
- B. Use a separate Cisco Wireless Lan Controller.
- C. Enable 802.1x and Cisco Centralized Key Management for phone authentication.
- D. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.
- E. Use dedicated Access Points only for Voice over Wireless.
Answer: C,D
Explanation:
Explanation/Reference:
NEW QUESTION 88
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. 802.1x
- B. no authentication
- C. open authentication
- D. WPA2
Answer: D
Explanation:
NEW QUESTION 89
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?
- A. VLAN-based central switching
- B. FlexConnect local authentication
- C. learn client IP address
- D. central DHCP processing
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise
NEW QUESTION 90
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the certificate, WLAN, and radio interface on WGB.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
- C. Configure WGB as a network device in ISE.
- D. Configure the certificate on the WLC.
- E. Configure the access point with the root certificate from ISE.
- F. Configure WLAN to authenticate using ISE.
Answer: A,B,F
Explanation:
https://mrncciew.com/2018/05/25/wgb-with-peap/
NEW QUESTION 91
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. It must be Outbound because it is traffic that is generated from the WLC.
- B. To have the complete list of options, the CPU ACL must be created only by the CLI.
- C. Packet direction has no significance; it is always Any.
- D. It must be Inbound because traffic goes to the WLC.
Answer: D
NEW QUESTION 92
An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?
- A. Enable hyper location services for RFID.
- B. Enable RFID tags in tracking options
- C. Enable probing clients for active tags.
- D. Define an RFID group globally and add the tags.
Answer: C
NEW QUESTION 93
Refer to the exhibit.
An engineer needs to manage non-802.11 interference. What is observed in the output on PI?
- A. Several light interferers are collectively impacting connectivity at this site.
- B. At least one strong interferer is impacting connectivity at this site.
- C. The three Individual clusters shown Indicate poor AP placement.
Answer: C
NEW QUESTION 94
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?
- A. 7 days
- B. 3 hours
- C. 24 hours
- D. 3 days
Answer: A
Explanation:
Explanation
(7 Days is the max, you can select)
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-c
NEW QUESTION 95
An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)
- A. The types of the primary and secondary Cisco CMX installations differ.
- B. The delay between the primary and secondary instance is 200 ms.
- C. The Cisco CMX instances are installed in the same subnet.
- D. The sizes of the primary and secondary Cisco CMX installations differ.
- E. Both Cisco CMX installations are virtual.
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/106/cmx_config/b_cg_cmx106/managing_cisco_cmx_system_settings.html
NEW QUESTION 96
What is configured to use more than one port on the OEAP to extend the wired network's?
- A. remote LAN
- B. remote LAN ACL
- C. AAA override
- D. client load balancing
Answer: A
Explanation:
NEW QUESTION 97
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless to the wireless users. After a client reports that the video is unable to stream the administrator determines that the client is connecting a data rate of 12 Mbps and is trying to stream to a void multicast address on the network. Which two actions must be applied? (Choose two.)
- A. Change the WLAN QoS value to Bronze for the WLANs on the controller.
- B. Allow RTSP stream the video due to wireless multicast not using acknowledgments.
- C. Implement video stream for the multicast video on the controller
- D. Turn off IGMP snooping for all the configured WLANS on the controller.
- E. Allow multicast direct to work correctly and multicast-direct to be enabled globally.
Answer: C,E
NEW QUESTION 98
An engineer is responsible for a wireless network for an enterprise. The enterprise has distributed offices around the globe, and all APs are configured in FlexConnect mode. The network must be configured to support 802.11r and CCKM. What needs to be implemented to accomplish this goal?
- A. Enable FlexConnect local switching.
- B. Enable VLAN-based central switching.
- C. Enable FlexConnect local authentication.
- D. Create FlexConnect groups.
Answer: D
Explanation:
Explanation
Text Description automatically generated
NEW QUESTION 99
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?
- A. Disable MCS data rates used by 40 MHz channels.
- B. Disable data rates that use CCK.
- C. Disable MCS data rates 0 through 11.
- D. Disable VHT data rates.
Answer: B
Explanation:
References: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site- survey-guidelines-wlan-00.html
NEW QUESTION 100
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Interference Devices reports on Cisco Wireless LAN Controller
- B. Performance reports on Cisco Prime Infrastructure
- C. CleanAir reports on Cisco Prime Infrastructure
- D. Air Quality reports on Cisco Wireless LAN Controller
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR1
NEW QUESTION 101
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION 102
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit 0.0.0.0 0.0.0.0 UDP any DNS
- B. Permit 0.0.0.0 0.0.0.0 any DNS any
- C. Permit any any any
- D. Permit 0.0.0.0 0.0.0.0 UDP any any
- E. Permit 0.0.0.0 0.0.0.0 UDP DNS any
Answer: A,D
NEW QUESTION 103
An engineer just added anew MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520 WLC, which is located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two devices. Which traffic must be allowed on the firewall to ensure that the MSE and WLC can communicate using NMSP?
- A. UDP 16113
- B. UDP 1613
- C. TCP 16113
- D. TCP 1613
Answer: C
Explanation:
Explanation
hnps:'/vvw\vxJsco.com'c/en;us'support;docsAvJreless'5500-series-wJreless-controllers/113344-cuwn-ppm html
https:'/mrncciewxom/2014/09/25/what-is-nmsp/
https:'/mvwxiscoxomx/en'us'support/docs'wireless'mo
NEW QUESTION 104
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 105
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
- A. SOAP/XML
- B. SNMP
- C. NMSP
- D. CAPWAP
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter NMSP (Network Mobility Services Protocol) - The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.
https://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.ht
NEW QUESTION 106
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. FlexConnect
- B. split tunneling
- C. AP failover priority
- D. SE-connect
Answer: B
Explanation:
NEW QUESTION 107
......
Prerequisites for Cisco 300-430 Exam
The targeted audience for this exam is those individuals who work as Network Designers, Wireless Network Engineers, and Sales Engineers. The potential candidates pursuing this certification test shouldn’t meet any requirements. However, they must be adequately prepared and possess a deep understanding of the exam topics before taking Cisco 300-430. Please note that it will be easier for you to possess a minimum of 3 years of working experience in implementing enterprise networking solutions.
Guaranteed Accomplishment with Newest Mar-2022 FREE: https://www.free4torrent.com/300-430-braindumps-torrent.html
Authentic 300-430 Dumps - Free PDF Questions to Pass: https://drive.google.com/open?id=1UnsZAgVgiFpIwnGOAZ_Wp5qnJ1iZD0-w