[2023] DES-3128 by Dell EMC Actual Free Exam Practice Test
Free Dell EMC DES-3128 Exam Question
Dell EMC NetWorker Specialist Exam Certification Details:
| Duration | 90 mins |
| Exam Price | $230 (USD) |
| Passing Score | 63% |
| Exam Name | Dell EMC Certified Specialist - Implementation Engineer - NetWorker (DECS-IE) |
| Schedule Exam | Pearson VUE |
EMC DES-3128 is a certification exam for the Specialist - Implementation Engineer, NetWorker certification track. Specialist - Implementation Engineer, NetWorker Exam certification verifies the candidate's skills in designing, installing, configuring, maintaining, and troubleshooting the EMC NetWorker backup and recovery solution. The EMC NetWorker is a backup and recovery software that provides centralized management of data protection across various platforms, including virtual, physical, and cloud environments.
NEW QUESTION # 31
What resource does NetWorker use to protect VMware objects, save sets, or clients?
- A. Protection Group
- B. Data Protection Policy
- C. Workflows
- D. Actions
Answer: B
NEW QUESTION # 32
Which NetWorker module must be installed on a NetWorker client running an SAP R/3 on Oracle to ensure it is backed up properly without a need to shut down the application?
- A. NMSAP
- B. NMM
- C. NMMEDI
- D. NMDA
Answer: A
Explanation:
NMSAP (NetWorker Module for SAP) is a NetWorker module that must be installed on a NetWorker client running an SAP R/3 on Oracle to ensure it is backed up properly without a need to shut down the application.
NEW QUESTION # 33
A NetWorker server is utilizing a remote storage node.A media library with two LTO Ultnum-8 drives is attached to the storage node via Fiber Channel interface.There is an AFTD device labeled to the Dally pool, and a media library has several cartridges labeled for the Weekly pool.
All devices are configured on the storage node. A Windows 2019 client is being backed up to the Daily pool while the Client Direct option is enabled in the client's properties.
What is the correct data flow?
- A. The storage node writes the data to the LTO Ultrium-8 device.
- B. Backup data is being written directly to the LTO Ultrium-8 device.
- C. Backup data is being written directly to the AFTD device.
- D. The storage node writes the data to the AFTD device.
Answer: B
NEW QUESTION # 34
A DB2 database is running on an IBM AIX operating system. A customer asks an administrator to configure a backup with NetWorker.
How should the administrator respond?
- A. NMM must be installed
- B. AIX backup is not supported
- C. NMDA must be installed
- D. No additional module is required.
Answer: B
NEW QUESTION # 35
What port is required tor NMC access?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
The port required for NMC access is port 9000. The other options are not related to this process.
NEW QUESTION # 36
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?
- A. NetWorker does not support Linux mount point backup.
- B. The save command did not include the -X option.
- C. Mount point backups require the extended client
- D. The save command did not include the -x option.
Answer: D
NEW QUESTION # 37
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?
- A. Run an executable installation package
- B. Invoke the VMware Update Manager to download the installation package.
- C. Copy a zipped installation package to a Linux VM, and run the setup script
- D. Deploy an OVF template.
Answer: B
NEW QUESTION # 38
What is staging used for?
- A. move data to a different storage device
- B. keep both copies online at all times
- C. maintain a longer retention period
- D. make and keep a second copy at all times
Answer: A
NEW QUESTION # 39
Which command can be used to query the NetWorker media database and to export the fields as comma separated fields?
- A. mminfo -m
- B. mminfo -csv
- C. mminfo -xc,
- D. mminfo -avot
Answer: C
NEW QUESTION # 40
What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
The minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone is 7. This is because each datazone requires a minimum of 1 served license, and each additional storage node requires an additional served license. The other options are not related to this process.
NEW QUESTION # 41
What is a part of a full backup in a Windows BMR recovery operation?
- A. UEFI Partitions
- B. Windows Roles
- C. Windows File System
- D. Critical volumes
Answer: D
Explanation:
A part of a full backup in a Windows BMR recovery operation is the critical volumes, which are the drives containing the Windows operating system, boot loader, and related system files. This is required to ensure that the system is able to boot after the recovery process is complete.
NEW QUESTION # 42
What resource does NetWorker use to protect VMware objects, save sets, or clients?
- A. Data Protection Policy
- B. Workflows
- C. Actions
- D. Protection Group
Answer: D
Explanation:
NetWorker uses Protection Groups to protect VMware objects, save sets, or clients. Protection Groups allow you to group related objects together, making it easier to manage and run backups.
NEW QUESTION # 43
Which NetWorker component is comprised of a single NetWorker Server, its clients, and storage nodes?
- A. save set
- B. media pool
- C. protection group
- D. datazone
Answer: A
NEW QUESTION # 44
A customer has just purchased NetWorker software and asks a backup administrator to deploy a NetWorker server on an Oracle Solans 11 host How should the administrator respond?
- A. Install Igtobbb pkg, Igtoserv pkg and Igtonode.pkg packages only
- B. NetWorker Server is not supported on Oracle Solaris hosts.
- C. Install the Igtoclnt pkg. Igtoman pkg, Igtonode.pkg, Igtoauthc.pkg, and Igtoserv.pkg packages
- D. Upgrade the Oracle Solaris to version 12.
Answer: B
NEW QUESTION # 45
Refer to the exhibit.
An administrator asks about the clone flag on the Cloud. What does the T flag represent?
- A. Save set exists only on a Cloud Tier device
- B. Save set will be cloned to a tape device
- C. Save set exists only on the cloud storage
- D. Save set will be terminated at the cloud provider
Answer: A
NEW QUESTION # 46
A backup administrator was asked to configure a Microsoft Exchange server To which two types of devices can this backup be directed?
- A. Dell EMC Cloud Tier and Tape
- B. CloudBoost and PowerProtect DD
- C. PowerProtect DD and AFTD
- D. Tape and PowerProtect DD
Answer: C
Explanation:
A backup administrator can configure a Microsoft Exchange server to be directed to two types of devices: PowerProtect DD and AFTD (Advanced File Type Discovery). PowerProtect DD is a disk-based data protection solution from Dell EMC that provides backup, replication, and recovery for physical, virtual, and cloud environments. AFTD is an add-on that helps to identify, classify, and protect file types such as Microsoft Exchange and other applications in physical, virtual, and cloud environments.
NEW QUESTION # 47
A customer needs to perform a Virtual Machine Recovery from a save set located on a Dell EMC Cloud Tier.
Which additional device type must be available to perform this recovery?
- A. PowerProtect DD
- B. AFTD
- C. CloudBoost
- D. PowerProtect Storage Direct
Answer: A
NEW QUESTION # 48
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. nsrsnmd
- B. remote-mount-password
- C. passwd
- D. diagnostics
Answer: B
NEW QUESTION # 49
Which commands can be used to locate the bootstrap SSID on a backup volume?
- A. scanner and mminfo
- B. mminfo and nsrck
- C. nsrnm and scanner
- D. nstinfo and mminfo
Answer: A
NEW QUESTION # 50
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?
- A. Run an executable installation package
- B. Invoke the VMware Update Manager to download the installation package.
- C. Copy a zipped installation package to a Linux VM, and run the setup script
- D. Deploy an OVF template.
Answer: D
Explanation:
To install a virtual CloudBoost appliance on a VMware ESXi host, the backup administrator must deploy an OVF template. This will deploy the appliance on the ESXi host and configure the settings for the appliance.
NEW QUESTION # 51
A NetWorker server has a media library attached. A backup administrator has started a workflow and noticed that the Waiting for 1 writable volume(s) to pool alert appeared. There are some unlabeled media in the library, but NetWorker doesn't label them automatically.
What is the cause of this behavior?
- A. A Recycle to other pools attribute on the pool properties is disabled.
- B. An Auto media management attribute in tape properties is disabled.
- C. An Auto media management attribute in library properties is disabled.
- D. A Recycle from other pools attribute on the pool properties is disabled.
Answer: C
Explanation:
This alert indicates that the auto media management attribute in the library properties is disabled. This feature allows NetWorker to automatically label media if it is not labeled when it is inserted into the media library.
NEW QUESTION # 52
Which technology is used for backup and recovery with NMM?
- A. NDMP
- B. Changed Block Tracking
- C. Parallel Save Streams
- D. Virtual Device Interface
Answer: A
Explanation:
Network Data Management Protocol (NDMP) is the technology used for backup and recovery with NetBackup Media Manager (NMM). NDMP is used to transfer data between the NetBackup server and the storage device.
NEW QUESTION # 53
......
EMC DES-3128 Actual Questions and Braindumps: https://www.free4torrent.com/DES-3128-braindumps-torrent.html
DES-3128 dumps & Dell EMC sure practice dumps: https://drive.google.com/open?id=1VX4Wkes3GtFtYjH4CsTNKKYs3qQoDL03