350-501 Dumps PDF New [2023] Ultimate Study Guide
350-501 Exam Dumps PDF Updated Dump from Free4Torrent Guaranteed Success
Segment Routing and Multi-Protocol Label Switching: 20%
- Describing traffic engineering (RSVP functionality, FRR, and ISIS & OSPF extensions);
- Implementing Multi-Protocol Label Switching (MPLS), including LDP sync, session protection & neighbors, as well as unified MPLS & MPLS OAM;
- Describing the segment types, segment routing traffic engineering, PCE-PCC architectures, IGP control plane, and TI-LFa.
The Cisco 350-501 certification exam is a comprehensive exam that covers a wide range of topics. The exam is divided into several sections, each focusing on a specific technology. The exam includes questions on Routing protocols, such as OSPFv2, OSPFv3, IS-IS, and BGP. MPLS topics include MPLS LDP, MPLS VPNs, and MPLS TE. Quality of Service (QoS) topics include classification and marking, congestion management and avoidance, and traffic shaping and policing. Network automation topics include device programmability, automation tools, and APIs. Lastly, Security protocols include IPsec, SSL/TLS, and IKEv2.
Career Opportunities
By passing the Cisco 350-501 exam, you will easily get a job as a network engineer. These professionals are responsible for maintaining computer networks and software among other relevant systems. In many organizations, these individuals also carry out disaster recovery operations and protect data, hardware, and software from security attacks. As part of their day-to-day roles within modern IT departments, network engineers may also identify and replace faulty computer network hardware parts when called upon.
To qualify for this position, you must demonstrate a solid understanding of network hardware and network infrastructure, which makes the above-mentioned 350-501 exam one of the best options to help you fulfill such dreams. Other popular job roles that go hand in hand with network engineering include network architect, helpdesk support, systems engineer, Cisco engineer, and network administrator. According to PayScale.com, a typical network engineer in the USA is guaranteed an average annual salary of $75k. Of course, the earning potential will be largely influenced by a ton of factors including the experience level, skills, and location.
In addition, you can further proceed to the job position of a senior network engineer. These are experts who take pride in being the company's go-to IT professionals for practically all network-related issues. They are tasked with developing and maintaining functional networks, mentoring key team players, and troubleshooting. Working in this capacity, these individuals should have exceptional problem-solving skills through a combination of network administration and architecting knowledge. Recent information on the PayScale website puts senior network engineers among the highest-paid roles, with a mean annual salary of $101k.
NEW QUESTION # 94
A regional MPLS VPN provider operates in two regions and wants to provide MPLS L3VPN service for a customer with two sites in these separate locations. The VPN provider approaches another organization to provide backbone carrier services so that the provider can connect to these two locations.
Which statement about this scenario is true?
- A. When eBGP is used for label exchange using the send-label option, MPLS-BGP forwarding is configured under the global ABC CSC PE-to CE interface
- B. When edge routers at different regional sites are connected over the global carrier backbone, MP- eBGP must run between the routers to exchange the customer VPNv4 routes
- C. When BGP is used for both route and label exchange, the neighbor a.b.c.d send-lable command is used under the address family VPNv4 command mode.
- D. When IGP is used for route exchange and LDP for label exchange, MPLS is enabled only on the VRF interface on the backbone-earner PE side.
Answer: A
Explanation:
Referring to "(int)#mpls bgp forwarding", which has the IOS[-XE] software install a hostroute for the remote BGP peer - a requirement for label-binding.
NEW QUESTION # 95
Drag and drop the OSs from the left onto the correct deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 96
Refer to the exhibit. While troubleshooting the OSPF adjacency between routers R1 and R2 an engineer noticed that both routers are stuck in the EXCHANGE/EXSTART state.
What should the engineer fix to solve the ongoing issue?
- A. match IPv4 addresses
- B. match MTU values
- C. match OSPF network types
- D. match OSPF areas
Answer: B
NEW QUESTION # 97
Refer to the exhibit. Routers P4 and P5 receive the 0.0.0.0/0 route from the ISP via eBGP peering. P4 is the primary Internet gateway router, and P5 is its backup. P5 is already advertising a default route into the OSPF domain. Which configuration must be applied to P4 so that it advertises a default route into OSPF and becomes the primary Internet gateway for the network?
- A. configure terminal
router ospfv3 100
address-family ipv4 unicast
redistribute bgp 65500 metric 40 metric-type 1
end - B. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate metric 40 metric-type 2
end - C. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate metric 40 metric-type 1
end - D. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate always metric 40 metric-type 1
end
Answer: B
NEW QUESTION # 98
Refer to the exhibit.
While troubleshooting a connectivity issue on router R2, a network engineer with an employee id:3876.13.497 notices that although it detects three OSPF links from R1, the OSPF prefixes are missing from the routing table. What is the reason for the problem?
- A. Both loopback interfaces on R1 are configured as stub
- B. The subnet masks on the serial interfaces are mismatched.
- C. The serial interfaces have different MTUs
- D. The R2 Serial 1/0 interface is configured with an IP address, but the R1 Serial R1 Serial 1/0 interface in unnumbered.
Answer: D
NEW QUESTION # 99
An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to traffic from any customer VLAN Which configuration must the engineer use?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-12-1/b-ce-xe-16-12-asr900/m_ce_802_1ad_900.html
NEW QUESTION # 100
Refer to the exhibit. An engineer is implementing BGP selective prefix suppression. The router must advertise only 10.16.4.0/24,10.16.5.0/24, and summarized route 10.16.0.0/21, and suppress
10.16.6.0/24. Which configuration must the engineer apply to the router?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 101
Refer to the exhibit. The operations team is implementing an LDP-based configuration in the service provider core network with these requirements:
- R1 must establish LDP peering with the loopback IP address as its
Router-ID.
- Session protection must be enabled on R2.
How must the team update the network configuration to successfully enable LDP peering between R1 and R2?
- A. Change the LDP password on R2 to Cisco.
- B. Change the discover hello hold time and interval to their default values.
- C. Configure LDP session protection on R1.
- D. Configure mpls ldp router-id loopback0 on R1 and R2.
Answer: D
NEW QUESTION # 102 
Refer to the exhibit. A network operator needs to shut down interface Gi0/0/0/2 for maintenance. What occurs to the interface states of Gi0/0/0/0 and Gi0/0/0/1?
- A. Gi0/0/0/1 and Gi0/0/0/0 remain standby
- B. Gi0/0/0/0 becomes active; Gi0/0/0/1 remains standby
- C. Gi0/0/0/1 and Gi0/0/0/0 become active
- D. Gi0/0/0/1 becomes active; Gi0/0/0/0 remains standby
Answer: B
Explanation:
Section: Networking
NEW QUESTION # 103
Refer to the exhibit:
Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because the two routers are in the same subnet.
- B. The neighbor relationship is down because the two routers are configured with different area types
- C. The neighbor relationship is up because R2 is level 1 and level 2 router.
- D. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
Answer: D
NEW QUESTION # 104
Refer to the exhibit.
An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?
- A. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface.
- B. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface.
- C. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface.
- D. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the poso/2/0/0 interface.
Answer: D
NEW QUESTION # 105
Why do packet loops occur during the configuration of BIDIR-PIM?
- A. The router has not been configured to advertise itself.
- B. The network does not support BIDIR-PIM.
- C. No interface for carrying traffic for multicast groups has been configured.
- D. The network is partially upgraded to support BIDIR-PIM.
Answer: D
Explanation:
Section: Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/ configuration_guide/ip_mcast_rtng/b_1612_ip_mcast_rtng_9600_cg/configuring_pim.html
NEW QUESTION # 106
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
Explanation
Stateful (It has 1: N translation, It uses address overloading, It conservers IPv4 addresses) Stateless (It is limited on the number of endpoints, It mandates IPv4-translatable IPv6 address allocation)
NEW QUESTION # 107
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 108
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 109
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
NEW QUESTION # 110
Refer to the exhibit an engineer working for a private telecommunication company with an employee Id: 4065:96:080 upgrades the WAN link between routers ASBR-101 and ASBR-201 to 1Gb by Installing a new physical connection between the Gi3 Interfaces. Which BGP attribute must the engineer configure on ASBR-201 so that the existing WAN link on Gi2 Is maintained as a backup?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 111
Refer to the exhibit:
Which statement describes this configuration?
- A. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session
- B. Router 1 can be remotely managed by the CLI using Telnet
- C. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only
- D. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration
Answer: A
NEW QUESTION # 112
......
Pass Your Cisco Exam with 350-501 Exam Dumps: https://www.free4torrent.com/350-501-braindumps-torrent.html
350-501 Exam Dumps - Cisco Practice Test Questions: https://drive.google.com/open?id=1DhkaHhlQ7KGeMeSXIOZ2AoNeBq5_3oX2