Ace 350-801 Certification with 408 Actual Questions
PASS Cisco 350-801 EXAM WITH UPDATED DUMPS
Preparing for the Cisco 350-801 certification exam requires a solid understanding of Cisco Collaboration solutions and hands-on experience in implementing and operating these solutions. Candidates can use Cisco's official study materials, such as Cisco Press books, e-learning courses, and practice exams, to prepare for the exam. Additionally, candidates can join Cisco's Learning Partner Program to receive instructor-led training and access to lab environments to gain practical experience.
NEW QUESTION # 203
Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default?
- A. the Operator call handler
- B. the Goodbye call handler
- C. the Directory handler
- D. the Interview handler
Answer: C
NEW QUESTION # 204
Refer to the exhibit.
Refer to the exhibit. An engineer is troubleshooting this video conference issue:
*A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works.
*As soon as the Cisco 9971 in Region1 conferences in a Cisco 8945 in Region2. the Regio1l endpoint cannot see the Region2 endpoint video.
What is the cause of this issue?
- A. Maximum Audio Bit Rate must be increased.
- B. Cisco 8945 does not have a camera connected.
- C. Maximum Session Bit Rate for Video Calls is too low.
- D. Maximum Session Bit Rate for Immersive Video Calls is too low.
Answer: C
NEW QUESTION # 205
Refer to the exhibit. An administrator accesses the terminal of a Cisco UCM and starts a packet capture. Which two commands must the administrator use on Cisco UCM to generate DNS traffic? (Choose two.)
- A. utils ntp status
- B. show version active
- C. utils diagnose lest
- D. show cdp neighbor
- E. utils diagnose module validate_network
Answer: C,E
NEW QUESTION # 206 
Refer to the exhibit. An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34.222 and the IP address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?
- A. An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.
- B. An NTP mismatch is preventing the connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.
- C. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
- D. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
Answer: A
NEW QUESTION # 207
After an engineer implements the FAC and CMC features together, users report that calls take almost one minute to complete and that they occasionally hear the reorder tone Which two actions address this issue? (Choose two.)
- A. Advise the user to press the "#" button after dialling the FAC and CMC codes
- B. Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
- C. Change the code if the problem persists i/i-Advise the user to hang up and try again
- D. Do not wait for the tones immediately dial the FAC and CMC
Answer: A,B
NEW QUESTION # 208
Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan.
How long is the default wait time?
- A. 10 seconds
- B. 5 seconds
- C. 20 seconds
- D. 15 seconds
Answer: D
NEW QUESTION # 209
An engineer must configure switch port 5/1 to send CDP packets to configure an attached Cisco IP phone to trust tagged traffic on it's access port. Which command is required to complete the configuration?
- A. platform qos trust extend cos 3
- B. platform qos trust extend cos 5
- C. platform qos extend trust
- D. platform qos trust extend
Answer: D
NEW QUESTION # 210
Refer to the exhibit.
A call to an international number has failed. Which action corrects this problem?
- A. Assign a transcoder to the MRGL of the gateway.
- B. Add the isdn switch-type primart-dms100 command to the serial interface.
- C. Add the bearer-cap speech command to the voice port.
- D. Strip the leading 011 from the called party number
Answer: D
NEW QUESTION # 211
During the Cisco IP Phone registration process the TFTP download fails. What are two reasons for this issue?
(Choose two)
- A. The Cisco IP Phone does not know the IP address of the TFTP server
- B. Option 150 string was not specified, or an incorrect Option 150 string was specified
- C. The DNS server was not specified, which is needed to resolve a hostname in an Option 150 string.
- D. Option 100 string was not specified, or an incorrect Option 100 string was specified
- E. The Cisco IP Phone does not know the IP address of any of the Cisco UCM Subscriber nodes
Answer: A,B
NEW QUESTION # 212
Which attribute contains an XMPP stanza?
- A. message
- B. type
- C. iq
- D. presence
Answer: B
Explanation:
Section: Collaboration Applications
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2011/pdf/TECUCC-2611.pdf slide 18
NEW QUESTION # 213 
Refer to the exhibit. The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is not matched because DNIS does not end with a "$".
- B. The translation rule is not matched because DNIS contains "-".
- C. The translation rule is matched and the translated number is 025553431234.
- D. The translation rule is matched and the translated number is 02553431234.
Answer: B
Explanation:
Section: Call Control
NEW QUESTION # 214
An engineer is configuring Cisco Jabber for Windows and must implement desk phone control mode for some of the users.
Which access control group must be configured for those users to enable this functionality?
- A. Standard CTI Enabled
- B. Standard CTI Secure Connection
- C. Allow Control of Device from CTI
- D. Standard CTI Allow Reception of SRTP Key Material
Answer: C
NEW QUESTION # 215
Refer to the exhibit.
Refer to the exhibit. A collaboration engineer is configuring the Cisco UCM IM and Presence Service. Which two steps complete the configuration of the SIP trunk security profile? (Choose two.)
- A. Check the box to allow charging header.
- B. Check the box to enable application-level authorization.
- C. Check the box to transmit security status.
- D. Check the box to accept unsolicited notification.
- E. Check the box to accept replaces header.
Answer: D,E
NEW QUESTION # 216
What is a capability provided by the Cisco Expressway Series?
- A. endpoint registration
- B. intercluster extension mobility
- C. voice and video transcoding
- D. voice and video conferencing
Answer: A
Explanation:
The Cisco Expressway Series is primarily used for secure communication and collaboration services across networks. One of its key capabilities is endpoint registration, which allows remote Cisco Jabber clients and SIP-based endpoints to register with Cisco Unified Communications Manager (CUCM) via Mobile and Remote Access (MRA).
NEW QUESTION # 217
Where is it recommended to enforce the QoS trust boundary on a network?
- A. LAN access ingress
- B. LAN access egress and the WAN access egress
- C. LAN access egress
- D. LAN access ingress and the WAN access ingress
Answer: D
NEW QUESTION # 218
......
350-801 Questions PDF [2026] Use Valid New dump to Clear Exam: https://www.free4torrent.com/350-801-braindumps-torrent.html
Passing Cisco 350-801 Exam Using 2026 Practice Tests: https://drive.google.com/open?id=10G0qU252OZSTbHqo8fXl-sdN_nPhdhIa