CheckPoint 156-835 Exam Info and Free Practice Test | Free4Torrent
Pass CheckPoint 156-835 Premium Files Test Engine pdf - Free Dumps Collection
The exam consists of 90 multiple-choice questions that cover a wide range of topics, including Maestro architecture, Maestro orchestration and management, and integrating Maestro with other security solutions. The exam is timed, and candidates have 120 minutes to complete it. The passing score for the exam is 70%. Successful candidates will receive the Check Point Certified Maestro Expert certification, which is a valuable credential in the network and security industry.
NEW QUESTION # 26
In order to set Site (chassis) priority per VS, following command should be used:
- A. From any VS context: set chassis high-availability vs <vsid> chassis_priority
- B. From given VSO context: set chassis high-availability vs chassis_priority
- C. From given VS context: set chassis high-availability vs chassis_priority
- D. From VSO context: set chassis high-availability vs <vsid> chassis_priority
Answer: B
NEW QUESTION # 27
What will happen in case of NAT of the traffic passing through Management network?
- A. Orchestrator will disable NAT and traffic will pass with no issue
- B. This traffic will not pass correction, since it will be dropped
- C. This traffic will pass with no inspection
- D. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances
Answer: B
NEW QUESTION # 28
What cannot be learned from the output of lldpctl?
- A. Distribution mode
- B. Serial number of Appliance
- C. Orchestrator's IP
- D. Appliance model
Answer: A
NEW QUESTION # 29
What cannot be a reason for "Failed to get remote orchestrator interfaces" error message, when clicking on "Orchestrator" in WebUI?
- A. One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators
- B. No Sync between orchestrators
- C. Single orchestrator environment, but configured Orchestrator amount is 2
- D. Remote orchestrator has no empty interfaces
Answer: D
NEW QUESTION # 30
What is the maximum amount of Appliances within the same Security Group?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 31
What is the maximum amount of Appliances within Security group in Dual-Site configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 32
In case of VSX: What is the right command to see overall performance details of all Appliances within the Security Group and all Virtual Systems?
- A. asg pert -v
- B. asg pert -vs all -v -vv
- C. asg pert -v -p
- D. asg pert -vs enabled -p
Answer: B
NEW QUESTION # 33
There are two 10Gbps dual-port NICs and one 40Gbps NIC installed on a 23800 Appliance in slots 1, 2 and 3 accordingly. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Port 1 in Slot 1 and Port 2 in Slot 1
- B. Port 1 in Slot 2 and Port 2 in Slot 1
- C. Any pair of available ports
- D. This configuration is not supported
Answer: A
NEW QUESTION # 34
What is the throughput penalty of Security Group?
- A. 5% per member
- B. 1% per member
- C. Depends on the type of Appliance
- D. 10% per Security Group with no relation to amount of members
Answer: C
NEW QUESTION # 35
On MHO-170 - In default configuration, what are GAIA names of Security Group Management ports?
- A. eth1-Mgmt1 and eth1-Mgmt2
- B. eth1-Mgmt1 and eth1-Mgmt3
- C. eth1-Mgmt1 and eth2-Mgmt1
- D. eth1-Mgmt3 and eth1-Mgmt4
Answer: B
NEW QUESTION # 36
What kinds of transceivers are supported on Orchestrator MHO-140?
- A. SFP+, SFP28, QSFP
- B. SFP, QSFP, QSFP28
- C. SFP, SFP+, QSFP, QSFP28
- D. SFP, SFP+, SFP28
Answer: C
NEW QUESTION # 37
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
- A. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
- B. On Orchestrator: Change port type from uplink to downlink
- C. No change required
- D. On Appliance: Change a port speed to 10Gbps
Answer: B
NEW QUESTION # 38
What is the default IP range of CIN network (with no increment)?
- A. 192.168.1.0
- B. The same as Management network
- C. 192. 0 .2 .0
- D. 198 .51 .100. 0
Answer: D
NEW QUESTION # 39
How many power supplies are presented on MHO-140?
- A. 1 with option for 2
- B. 0
- C. 1
- D. 2
Answer: D
NEW QUESTION # 40
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Port 1 in Slot 1 and Port 2 in Slot 1
- B. Port 1 in Slot 1 and Port 1 in Slot 2
- C. Port 1 in Slot 2 and Port 2 in Slot 1
- D. Any pair of available ports
Answer: A
NEW QUESTION # 41
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Port 1 in Slot 1 and Port 2 in Slot 1
- B. Port 1 in Slot 2 and Port 2 in Slot 1
- C. Port 1 in Slot 1 and Port 1 in Slot 2
- D. Any pair of available ports
Answer: C
NEW QUESTION # 42
What is the Iterator process?
- A. Iterator is the process that simulates distribution in case of Appliance failure
- B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- D. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
Answer: C
NEW QUESTION # 43
What is the difference between Dual-Site and Multi-Room?
- A. This is the same
- B. Multi-Room is a kind of Dual-Site deployment within the same building
- C. Multi-Room is Active / Standby and Dual-Site is Active / Active
- D. Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators
Answer: B
NEW QUESTION # 44
Which licenses should be issued for the Orchestrator?
- A. Depends on Software Blades enabled on connected appliances
- B. The Orchestrator is considered a Management server, hence it's licensed the same way
- C. The Orchestrator requires NGTX license
- D. No licenses are required for Orchestrator
Answer: D
NEW QUESTION # 45
How many orchestrators may Dual-Site include''
- A. 2 or 4
- B. 0
- C. 1
- D. Only 4
Answer: A
NEW QUESTION # 46
......
Updated Official licence for 156-835 Certified by 156-835 Dumps PDF: https://www.free4torrent.com/156-835-braindumps-torrent.html
New 2023 Realistic 156-835 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1NAbT85qsdVnjOxoANUrIFGCqbFAFG7We