Download Latest NSE7_SDW-7.0 Dumps with Authentic Real Exam Questions
Authentic NSE7_SDW-7.0 Exam Dumps PDF - Sep-2024 Updated
Fortinet NSE7_SDW-7.0 Exam, also known as the Fortinet NSE 7 - SD-WAN 7.0 Exam, is a certification exam that validates the skills and knowledge of IT professionals in designing, configuring, and managing secure SD-WAN solutions using Fortinet products. NSE7_SDW-7.0 exam is intended for network administrators, security professionals, and solution architects who are responsible for implementing SD-WAN solutions in their organizations.
Fortinet NSE7_SDW-7.0 certification exam is recognized globally as a standard for measuring the knowledge and skills of IT professionals on SD-WAN solutions. It is an industry-recognized certification that demonstrates the candidate's expertise in SD-WAN architecture, deployment, and security. By earning this certification, IT professionals can enhance their career prospects and demonstrate their commitment to staying up-to-date with the latest developments in SD-WAN technology.
NEW QUESTION # 38
Which two performance SLA protocols enable you to verify that the server response contains a specific value? (Choose two.)
- A. twamp
- B. dns
- C. http
- D. icmp
Answer: B,C
Explanation:
Pages 85,86 in Study guide 7.0 Pages 100,101 in Study guide 7
NEW QUESTION # 39
Refer to the exhibit.
Which statement about the role of the ADVPN device in handling traffic is true?
- A. Two hubs, 10.0.1.101 and 10.0.2.101, are receiving and forwarding queries between each other.
- B. Two spokes, 192.2.0.1 and 10.0.2.101, forward their queries to their hubs.
- C. This is a hub that has received a query from a spoke and has forwarded it to another spoke.
- D. This is a spoke that has received a query from a remote hub and has forwarded the response to its hub.
Answer: C
NEW QUESTION # 40
Refer to the exhibit.
Which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules?
- A. All traffic from a source IP to a destination IP is sent to the same interface.
- B. All traffic from a source IP to a destination IP is sent to the least used interface.
- C. All traffic from a source IP is sent to the same interface.
- D. All traffic from a source IP is sent to the most used interface.
Answer: A
NEW QUESTION # 41
Refer to the exhibit.
Which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules?
- A. All traffic from a source IP to a destination IP is sent to the same interface.
- B. All traffic from a source IP to a destination IP is sent to the least used interface.
- C. All traffic from a source IP is sent to the same interface.
- D. All traffic from a source IP is sent to the most used interface.
Answer: A
NEW QUESTION # 42
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit A shows the SD-WAN performance SLA configuration, the SD-WAN rule configuration, and the application IDs of Facebook and YouTube. Exhibit B shows the firewall policy configuration and the underlay zone status.
Based on the exhibits, which two statements are correct about the health and performance of port1 and port2? (Choose two.)
- A. FortiGate identifies the member as dead when there is no Facebook and YouTube traffic passing through the member.
- B. Non-TCP Facebook and YouTube traffic are not used for performance measurement.
- C. FortiGate is unable to measure jitter and packet loss on Facebook and YouTube traffic.
- D. The performance is an average of the metrics measured for Facebook and YouTube traffic passing through the member.
Answer: B,D
Explanation:
Study Guide 7.0, pages 88 - 89.
Study Guide 7.2, pages 103 - 104.
Another comment said "because without using application Control on the firewall policy, SDWAN can't work" but there is a app control "default" defined on config.
NEW QUESTION # 43
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
- A. diagnose sys sdwan health-check
- B. diagnose sys sdwan intf-sla-log
- C. diagnose sys sdwan sla-log
- D. diagnose sys sdwan log
Answer: C
NEW QUESTION # 44
Exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The packet size exceeded the outgoing interface MTU.
- B. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- C. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- D. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
Answer: B
NEW QUESTION # 45
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
- A. The sdwan_service_id flag in the session information is 0.
- B. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
- C. All SD-WAN rules have the default setting enabled.
- D. Traffic does not match any of the entries in the policy route table.
Answer: A,D
NEW QUESTION # 46
Refer to the exhibit.
The exhibit shows the BGP configuration on the hub in a hub-and-spoke topology. The administrator wants BGP to advertise prefixes from spokes to other spokes over the IPsec overlays, including additional paths. However, when looking at the spoke routing table, the administrator does not see the prefixes from other spokes and the additional paths.
Based on the exhibit, which three settings must the administrator configure inside each BGP neighbor group so spokes can learn other spokes prefixes and their additional paths? (Choose three.)
- A. Set adv-additional-path to the number of additional paths to advertise
- B. Set advertisement-interval to the number of additional paths to advertise
- C. Set additional-path to send
- D. Enable soft-reconfiguration
- E. Enable route-reflector-client
Answer: A,C,E
NEW QUESTION # 47 
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
- A. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
- C. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
- D. London generates an IKE information message that contains the Toronto public IP address.
Answer: A,B
NEW QUESTION # 48
Refer to the exhibit.
Based on the output, which two conclusions are true? (Choose two.)
- A. Entry 1(id=1) is a regular policy route.
- B. The all_rules rule represents the implicit SD-WAN rule.
- C. There is more than one SD-WAN rule configured.
- D. The SD-WAN rules take precedence over regular policy routes.
Answer: A,C
NEW QUESTION # 49
Refer to the exhibit.
Which statement explains the output shown in the exhibit?
- A. FortiGate performed standard FIB routing on the session.
- B. FortiGate must re-evaluate the session due to routing change.
- C. FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.
- D. FortiGate will not re-evaluate the session following a firewall policy change.
Answer: B
NEW QUESTION # 50
Refer to the exhibit.
Based on the exhibit, which action does FortiGate take?
- A. FortiGate brings up port5 after it detects all SD-WAN members as alive.
- B. FortiGate bounces port5 after it detects all SD-WAN members as dead.
- C. FortiGate brings down port5 after it detects all SD-WAN members as dead.
- D. FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.
Answer: D
NEW QUESTION # 51
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Shared-policy shaping mode
- B. Interface-based shaping mode
- C. Reverse-policy shaping mode
- D. Per-IP shaping mode
Answer: B
Explanation:
Explanation
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.
NEW QUESTION # 52
What does enabling the exchange-interface-ip setting enable FortiGate devices to exchange?
- A. The IP address of their IPsec interfaces
- B. The name of their IPsec interfaces
- C. The tunnel ID of their IPsec interfaces
- D. The gateway address of their IPsec interfaces
Answer: A
NEW QUESTION # 53
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
- A. diagnose sys sdwan health-check
- B. diagnose sys sdwan intf-sla-log
- C. diagnose sys sdwan sla-log
- D. diagnose sys sdwan log
Answer: C
Explanation:
SD-WAN 7.2 Study Guide page 321 You can view the stored member metrics by running the diagnose sys sdwan sla-log command. Note that you must include the name of the performance SLA followed by the member configuration index number. To display the SLA logs per interface, you run the diagnose sys sdwan intf-sla-log command.
NEW QUESTION # 54
In a hub-and-spoke topology, what are two advantages of enabling ADVPN on the IPsec overlays? (Choose two.)
- A. It enables spokes to bypass the hub during shortcut negotiation.
- B. It enables spokes to establish shortcuts to third-party gateways.
- C. It provides the benefits of a full-mesh topology in a hub-and-spoke network.
- D. It provides direct connectivity between spokes by creating shortcuts.
Answer: C,D
NEW QUESTION # 55 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The measured bandwidth is less than 100 KBps.
- B. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- C. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
- D. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
Answer: A,D
NEW QUESTION # 56
Which two protocols in the IPsec suite are most used for authentication and encryption? (Choose two.)
- A. Encapsulating Security Payload (ESP)
- B. Secure Shell (SSH)
- C. Security Association (SA)
- D. Internet Key Exchange (IKE)
Answer: A,D
NEW QUESTION # 57
Which are two benefits of using CLI templates in FortiManager? (Choose two.)
- A. You can configure advanced CLI settings.
- B. You can configure interfaces as SD-WAN members without having to remove references first.
- C. You can reference meta fields.
- D. You can configure FortiManager to sync local configuration changes made on the managed device, to the CLI template.
Answer: A,C
NEW QUESTION # 58
Which two interfaces are considered overlay links? (Choose two.)
- A. IPsec
- B. LAG
- C. Physical
- D. GRE
Answer: A,D
NEW QUESTION # 59
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)
- A. Use different proposals are used between the interfaces.
- B. Specify a unique peer ID for each dial-up VPN interface.
- C. Use unique Diffie Hellman groups on each VPN interface.
- D. Configure the IKE mode to be aggressive mode.
Answer: B,D
NEW QUESTION # 60
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must enable auto-discovery-sender.
- B. You must set ike-version to 1.
- C. You must enable net-device.
- D. You must disable idle-timeout.
Answer: C
NEW QUESTION # 61
......
NSE7_SDW-7.0 Dumps for success in Actual Exam: https://www.free4torrent.com/NSE7_SDW-7.0-braindumps-torrent.html
NSE7_SDW-7.0 Dumps Special Discount for limited time Try FOR FREE: https://drive.google.com/open?id=1F_CxCMu8DyBTqecvATd_AqPwPsnAzot2