Excellent 350-401 Updated 2021 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Cisco 350-401
What Are the Topics Tested in Cisco ENCOR?
If you want to get the passing score in 350-401 exam, you will need to develop advanced skills in the following topics:
- Architecture
- Virtualization
- Infrastructure
- Automation
- Network Assurance
- Security
The first topic includes seven subtopics. Candidates should understand the difference between various design principles that are related to enterprise networks. Therefore, they will work with concepts such as Tier 2, Tier 3, and Fabric Capacity planning. Also, they will become skilled in handling high availability techniques such as FHRP, SSO, and redundancy. This topic also teaches exam-takers how to analyze WLAN deployment design principles and differentiate on-premises and cloud infrastructure deployments concepts. In addition, they should understand how to explain the Cisco SD-Acces and SD-WAN solution principles and describe concepts related to wired and wireless QoS. Finally, software and hardware switching mechanisms are included in the syllabus as well.
Within the Virtualization domain, candidates will learn different technologies for device virtualization. They will be exposed to concepts like Hypervisor types 1 and 2, virtual machines, and switching. Also, they have to be proficient in configuring and verifying data path virtualization technologies. In this section, they will get a deep-understanding of VRF, GRE, and IPsec tunneling notions. Besides, they will understand how network virtualization concepts such as LISP and VXLAN work.
The third topic is the most important in the overall exam's questions. It concentrates on giving candidates full details of Layer 2 and Layer 3 concepts. Applicants should also know how to troubleshoot, manage, and configure them properly using different tools and features. Also, they will go through Wireless-related concepts and become knowledgeable in the main principles and AP modes, Layer 1 concepts, or antenna types. Plus, they will discover which are the best techniques to troubleshoot WLAN configuration and wireless client connectivity issues. IP services management and deployment is another subtopic included here. Exam-takers will learn how to configure and verify NAP/PAT tools as well as configure multicast and first-hop redundancy protocols.
The fourth section talks about how to properly diagnose network problems. Candidates will learn more about debugs, conditional debugs, traceroute, and ping. They will also become skilled in configuring and verifying device monitoring, NetFlow, Flexible NetFlow, SPAN/RSPAN/ERSPAN, and IPSLA. Also, they will describe Cisco DNA Center workflows that enable them to configure, monitor, configure, and manage networks.
Within the Security domain, individuals will discover how device access controls work. They will learn more about password and line protection, as well as how to use AAA for authorization and authentication. Infrastructure security features configuration and their verification are also included here. Another subtopic handled is related to the REST API security and wireless security. Exam-takers should also know the components of network security design.
The final topic covers automation. It is essential that candidates understand how to interpret basic Python scripts and components. They will develop deep knowledge on how to construct a valid JSON encoded file, understand high-level principles and benefits of YANG and APIs for Cisco DNA Center and vManage. They will also be exposed to the topics like interpreting the response codes of REST API, EEM applet, and understand how to compare agent and agentless orchestration tools to configure, troubleshoot, and manage different network solutions.
NEW QUESTION 38
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. R4(config-router)nighbor 10.2.2.2 weight 200
- B. R3(config-router)bgp default local-preference 200
- C. R3(config-router)neighbor 10.1.1.1 weight 200
- D. R4(config-router)bgp default local-preference 200
Answer: D
Explanation:
Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the "bgp default local-preference value" command.
In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200.
NEW QUESTION 39
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
Explanation:
We cannot filter traffic that is originated from the local router (R3 in this case) so
we can only configure the ACL on R1 or R2. "Weekend hours" means from Saturday
morning through Sunday night so we have to configure: "periodic weekend 00:00
to 23:59".
Note: The time is specified in 24-hour time (hh:mm), where the hours range from 0
to 23 and the minutes range from 0 to 59.
NEW QUESTION 40
Refer to the exhibit.
Edge-01 is currently operational as the HSRP primary with priority 110. Which command on Edge-02 causes it to take over the forwarding role when Edge-01 is down?
- A. standby 10 timers
- B. standby 10 preempt
- C. standby 10 track
- D. standby 10 priority
Answer: D
NEW QUESTION 41
Which IP SLA operation requires the IP SLA responder to be configured on the remote end?
- A. TCP connect
- B. UDP jitter
- C. ICMP echo
- D. CMP jitter
Answer: B
Explanation:
Cisco IOS IP SLA Responder is a Cisco IOS Software component whose functionality is to respond
to Cisco IOS IP SLA request packets. The IP SLA source sends control packets before the operation
starts to establish a connection to the responder. Once the control packet is acknowledged, test
packets are sent to the responder. The responder inserts a time-stamp when it receives a
packet and factors out the destination processing time and adds time-stamps to the sent
packets. This feature allows the calculation of unidirectional packet loss, latency, and jitter
measurements with the kind of accuracy that is not possible with ping or other dedicated probe
testing.
Reference:
0aecd806bfb52.html
The IP SLAs responder is a component embedded in the destination Cisco device that allows the
system to anticipate and respond to IP SLAs request packets. The responder provides accurate
measurements without the need for dedicated probes.
2/46sg/configuration/guide/Wrapper-46SG/swipsla.html
UDP Jitter measures the delay, delay variation(jitter), corruption, misorderingand packet lossby
generating periodic UDP traffic. This operation always requires IP SLA responder.
NEW QUESTION 42
An engineer is working with the Cisco DNA Center API Drag and drop the methods from the left onto the actions that they are used for on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 43
Refer to the exhibit.
Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20?
- A. spanning-tree mst 1 root primary
- B. spanning-tree mst 1 priority 4096
- C. spanning-tree mst vlan 10,20 priority root
- D. spanning-tree mst 1 priority 1
- E. spanning-tree mstp vlan 10,20 root primary
Answer: A,B
Explanation:
Explanation
NEW QUESTION 44
Refer to the exhibit.
What is the effect of this configuration?
- A. When users attempt to connect to vty lines 0 through 4, the device will authenticate them against TACACS
+ if local authentication fails. - B. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey.
- C. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+.
- D. The device will allow only users at 192.168.0.202 to connect to vty lines 0 through 4.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 45
What is a benefit of Type 1 hypervisors?
- A. Administrators are able to load portable virtual machine packages in OVA or QCOW2 formats.
- B. Operators are able to leverage orchestrators to manage workloads that run on multiple Type 1 hypervisors
- C. Storage engineers are able to leverage VMDK files to provide storage to virtual machine.
- D. Network engineers are able to create virtual networks o interconnect virtual machines in Layer 2 topologies
Answer: D
NEW QUESTION 46
Drag and drop the characteristics from the left onto the deployment models on the right.
Answer:
Explanation:
Explanation
A picture containing graphical user interface Description automatically generated
NEW QUESTION 47
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace
Answer:
Explanation:
NEW QUESTION 48
Refer to the exhibit.
What is the effect of these commands on the BR and HQ tunnel interfaces?
- A. The keepalives are sent every 3 seconds and 5 retries
- B. The keepalives are sent every 5 seconds and 3 retries
- C. The tunnel line protocol goes down when the keepalive counter reaches 6
- D. The tunnel line protocol goes down when the keepalive counter reaches 5
Answer: B
NEW QUESTION 49
Refer to the exhibit. PC-1 must access the web server on port 8080. To allow this traffic, which statement must be added to an access control list that is applied on SW2 port G0/0 in the inbound direction?
- A. permit host 172.16.0.2 host 192.168.0.5 eq 8080
- B. permit host 192.168.0.5 host 172.16.0.2 eq 8080
- C. permit host 192.168.0.5 it 8080 host 172.16.0.2
- D. permit host 192.168.0.5 eq 8080 host 172.16.0.2
Answer: D
NEW QUESTION 50
An engineer is configuring GigabitEthernet1/0/0 for VRRP. When the router has the highest priority In group
5, It must assume the master role. Which command set should the engineer add to the configuration to accomplish this task?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 51
Refer to the exhibit.
Which HTTP JSON response does the python code output give?
- A. NameError: name 'json' is not defined
- B. 7.61
- C. KeyError 'kickstart_ver_str'
- D. 7.0(3)I7(4)
Answer: C
NEW QUESTION 52
Which devices does Cisco DNA Center configure when deploying an IP-based access control policy?
- A. all devices in selected sites
- B. All devices integrating with ISE
- C. selected individual devices
- D. all wired devices
Answer: A
Explanation:
When you click Deploy, Cisco DNA Center requests the Cisco Identity Services Engine (Cisco ISE) to send notifications about the policy changes to the network devices.
NEW QUESTION 53
Which statements are used for error handling in Python?
- A. catch/release
- B. try/catch
- C. block/rescue
- D. try/except
Answer: D
Explanation:
Explanation
The words "try" and "except" are Python keywords and are used to catch exceptions. For example:
try:
print 1/0
except ZeroDivisionError:
print 'Error! We cannot divide by zero!!!'
NEW QUESTION 54
Refer to the exhibit.
Which network script automation option or tool is used in the exhibit?
- A. Bash script
- B. NETCONF
- C. Python
- D. EEM
- E. REST correct
Answer: E
NEW QUESTION 55
Drag and drop the LIPS components on the left to the correct description on the right.
Answer:
Explanation:
NEW QUESTION 56
Refer to the Exhibit. Running the script causes the output in the exhibit. What should be the first line of the script?
- A. import manager
- B. ncclient manager import
- C. from ncclient import manager
- D. from ncclient import *
Answer: D
NEW QUESTION 57
......
Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Sample Questions and Practice Exam: https://www.free4torrent.com/350-401-braindumps-torrent.html
Real Exam Questions & Answers - Cisco 350-401 Dump is Ready: https://drive.google.com/open?id=1Jl4IBop_VKL_aeEre43z7CUqBkmkR9Nh