[Feb 16, 2023] Today Updated C-HANAIMP-18 Exam Dumps Actual Questions
C-HANAIMP-18 exam dumps with real SAP questions and answers
SAP C-HANAIMP-18 Exam Description:
PLEASE NOTE: This certification has been published for early adopters. Some recommended ‘ways to attain’ are not yet available. The "SAP Certified Application Associate - SAP HANA 2.0 SPS06" certification exam verifies that the candidate possesses the required knowledge in the area of the SAP HANA 2.0 based on SPS06 for the profile of an SAP HANA application consultant. This certificate builds on the basic knowledge gained through related SAP HANA training and preferably refined by practical experience within an SAP HANA project team, whereby the consultant applies acquired knowledge in this specialist area practically in projects. The certificate issued for passing this exam will be valid for 5 years.
SAP HANAIMP 18 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| Building calculation views | Demonstrate detailed knowldege of building a data model using all types of calculation views and nodes. HA300 OR LH – LR SAP HANA Modeling | > 12% |
| Describing the Technology and Deployment Scenarios of SAP HANA | Demonstrate an understanding of the key technology of SAP HANA HA100 OR LH – LR SAP HANA Modeling | > 12% |
| Configuring modeling functions | Demonstrate that you can implement common calculation view modeling functions, such as filters, parameters and hierarchies. HA300 OR LH – LR SAP HANA Modeling | > 12% |
| Optimizing the performance of models | Demonstrate that you can follow best practices for building high performance models and use the provided tools to monitor performance. HA300 OR LH – LR SAP HANA Modeling | > 12% |
| Managing and administering models | Demonstrate that you can setup the modeling ennvironment and use the tools provided to manage the data models. HA300 OR LH – LR SAP HANA Modeling | > 12% |
NEW QUESTION 16
In your calculation view, you want to consume a custom data source defined using SQLScript.In which type of object do you write your code?
- A. Table function
- B. Scalar function
- C. Procedure
- D. Anonymous block
Answer: A
NEW QUESTION 17
What is the SQL keyword used to process input parameters defined in a calculation view?
- A. Placeholder
- B. Hint
- C. Set
- D. Where
Answer: A
NEW QUESTION 18
Why would you create SQL in calculation views?
- A. To provide an alternative to graphical modeling
- B. To fine-tune performance
- C. To implement custom logic
- D. To enable write capabilities
Answer: C
NEW QUESTION 19
You are building a new calculation view A that uses calculation view B, as shown in the diagram. When you preview the calculation view A, the Account Number is not masked.
What could be the reason?
- A. You previewed the data with the technical user in SAP Web IDE for SAP HANA.
- B. Analytic privilege _SYS_BI_CP_ALL has been assigned.
- C. You did not define masking in calculation view A.
- D. The UNMASKED privilege for calculation view A has been granted.
Answer: C
NEW QUESTION 20
You have defined a pruning configuration table in a calculation view.What are you attempting to prune from the query execution?
- A. Filters
- B. Data sources of unions
- C. Joins
- D. Calculated columns
Answer: B
NEW QUESTION 21
You created a table and inserted data in it using SQL statements inside the SAP HANA Deployment Infrastructure (HDI) container of your project. You add this table as a data source to a calculation view and try to build it.What do you observe in the SAP HANA database container?
- A. The build is successful and the data preview returns expected data.
- B. The build fails and the table is not dropped.
- C. The build is successful but the data preview returns an error message.
- D. The build fails and the table is dropped.
Answer: A
NEW QUESTION 22
Which of the following data sources can you include in a graphical calculation view?Note: There are 2 correct answers to this question.
- A. Row table
- B. Table function
- C. Scalar function
- D. Procedure
Answer: A,B
NEW QUESTION 23
Why do you use parameter mapping in a calculation view?Note: There are 2 correct answers to this question.
- A. To assign variables to one or more attributes
- B. To pass variable values to external value help views
- C. To convert the data types of input parameters
- D. To push down filters to the lowest level calculation views
Answer: B,D
NEW QUESTION 24
Why would you develop an SQL procedure instead of a function?Note: There are 3 correct answers to this question.
- A. You need to use conditional logic.
- B. The code should modify data in a table.
- C. You want to create a dynamic analytic privilege.
- D. A temporary table must be created within the code.
- E. Optimal performance is a priority.
Answer: B,C,D
NEW QUESTION 25
Which type of join supports a temporal condition in a calculation view?
- A. Inner join
- B. Left outer join
- C. Text join
- D. Referential join
Answer: A
NEW QUESTION 26
You want to ensure that your calculation view does not give unexpected results for a query that is based on any combination of columns.What is the recommended approach for verifying the results?
- A. Select Data Preview for the calculation view.
- B. Write and execute a custom SQL query in the SQL Console.
- C. Set the HIDE property for columns NOT required.
- D. Select and deselect columns from the output mapping.
Answer: B
NEW QUESTION 27
You want to map an input parameter of calculation view A to an input parameter of calculation view B using the parameter mapping feature in the calculation view editor. However, the input parameters of calculation view B are not proposed as source parameters.What might be the reason for this?
- A. The names of the input parameters do not match.
- B. You selected the wrong parameter mapping TYPE.
- C. Your source calculation view is of type DIMENSION.
- D. You already mapped the input parameters in another calculation view.
Answer: D
NEW QUESTION 28
Which of the following are standard options provided to define analytic privileges?Note: There are 3 correct answers to this question.
- A. Hierarchy function
- B. Graph
- C. SQL expression
- D. Attributes
- E. Dynamic
Answer: C,D,E
NEW QUESTION 29
Why would you partition a table in an SAP HANA Cloud database?Note: There are 2 correct answers to this question.
- A. To improve data replication performance on large row tables
- B. To overcome the 2 billion record limit
- C. To improve query performance when accessing large column tables
- D. To improve response time when multiple users access the same table
Answer: B,C
NEW QUESTION 30
Using the table in the diagram, you need to create a cube calculation view.What is the simplest approach to create the output from the screenshot?
- A. Create 3 calculated columns.
- B. Create a filter expression that uses an OR operator.
- C. Implement a union node and map each year as a separate column.
- D. Create a restricted column for each country.
Answer: C
NEW QUESTION 31
You create a table function to remove historic records, sum the current total weekly working hours for each employee, and update the personnel table with the results. The deployment of the table function fails.Which of the following could be a valid reason?
- A. Your function includes a TRUNCATE statement.
- B. You did NOT define a valid table type.
- C. Your function refers to a scalar function.
- D. You did not define at least one input parameter.
Answer: A
NEW QUESTION 32
You are managing your source files using Git. In which sequence does your file progress towards a COMMIT?
- A. Staging area -> Working directory -> Local Git repository
- B. Local Git repository -> Staging area -> Working directory
- C. Working directory -> Local Git repository -> Staging area
- D. Working directory -> Staging area -> Local Git repository
Answer: D
NEW QUESTION 33
Two calculation views, A and B, are defined as shown in the diagram. Three analytic privileges have been granted to you.When you preview calculation view A, what data do you see?
- A. US for P1 and GE for P1
- B. US for P1
- C. US for P1 and P2, and GE for P2
- D. US for P1 and P2, and GE for P1 and P2
Answer: B
NEW QUESTION 34
You have a cube calculation view that consumes a dimension view. You suspect some dimension columns have been renamed in the cube calculation view.Which function of SAP Web IDE for SAP HANA do you use to check where the output columns originate from?
- A. Impact analysis
- B. Label column
- C. Where used
- D. Show lineage
Answer: D
NEW QUESTION 35
In a calculation view, what is the purpose of a variable?
- A. To filter an attribute at run-time based on a user input
- B. To provide a dynamic value in a calculated column
- C. To pass values between procedures and calculation views
- D. To break up complex SQL into smaller steps
Answer: A
NEW QUESTION 36
......
Exam Sure Pass SAP Certification with C-HANAIMP-18 exam questions: https://www.free4torrent.com/C-HANAIMP-18-braindumps-torrent.html
C-HANAIMP-18 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1xCLFTO1NXI6kJaGr6XCowKxg5RjBX116