Get instant access to HPE0-S54 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader HPE0-S54 PDF dumps ( 110 Q&As)
HP HPE0-S54 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
| Topic 19 |
|
NEW QUESTION 10
A customer wants to implement a large Microsoft Storage Spaces Direct environment.
Which protocol should the customer use?
- A. VXLAN
- B. OSPF
- C. RDMA
- D. NVGRE
Answer: D
NEW QUESTION 11
Match the use case to the management component they should use.
Answer:
Explanation:
NEW QUESTION 12
Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?
- A. Another composer is needed Frame 3
- B. Composer 2 is in the wrong frame
- C. The management network should be connected to the top and bottom frames
- D. The management ring should be connected using the FLM link ports
Answer: A
NEW QUESTION 13
Your customer has completed a successful Synergy Proof of Concept (PoC) consisting of a single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules.
The customer wants to:
add a second frame before they move into production
have unified management
have a separate logical enclosure for each frame
What are the basic steps to add the second frame? (Choose three.)
- A. Install a satellite module in the first frame.
- B. Move the standby composer to the second frame.
- C. Disconnect the existing management ring, and then cable the FLM (frame link module) in the first frame to the FLMs in the second frame.
- D. Move one of the uplinks from the FLM in the first frame to a FLM in the second.
- E. Move the bottom VC module from the first frame to the second.
Answer: B,C,D
NEW QUESTION 14
You prepared a proposal for a customer that plans to deploy Hyper-V clusters that include network adapters with RoCE support. The customer would like to know why this specific adapter was included in the proposal.
How would you explain your choice?
- A. RoCE adapters will improve performance for live migration and Microsoft SMB Direct environments
- B. RoCE adapters are the only adapters certified to use in Hyper-V based cluster
- C. RoCE adapters can use 100 Gb/s speed for internal virtual machine migrations
- D. RoCE adapters offer Secure Encryption functionality that can help to secure migration traffic
Answer: A
NEW QUESTION 15
A customer needs a ProLiant tower-based solution for their five remote offices.
Which ProLiant server family should you recommend?
- A. CL
- B. SY
- C. ML
- D. DL
Answer: C
NEW QUESTION 16
A customer is expanding their blade based infrastructure managed by HPE OneView with an HPE Synergy platform. The customer is familiar with HPE OneView and wants to know if the same management procedures can be used to manage HPE Synergy platform.
How should you respond to this question?
- A. HPE Synergy must be managed with HPE Systems Insight Manager
- B. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView
- C. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE OneView appliance is deployed for HPE Synergy management.
- D. HPE Synergy can be managed using the same HPE OneView instance that is used to manage HPE BladeSystem platform.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 17
A server consolidation solution must include services other than standard HPE CarePack deliverables. What should you include in your proposal to provide the customer with an overview of the project?
- A. terms and conditions
- B. billing schedule
- C. scope of work
- D. work timeline
Answer: C
NEW QUESTION 18
What are features of the HPE Synergy Planning Tool? (Choose two.)
- A. It recommends the best top-of-rack switch
- B. It runs on the Partner Ready Portal
- C. It provides estimated power consumption and weights of the solution
- D. It creates a REST configuration file based on configuration created
- E. It aids configuration of rack, Frames, compute, storage, fabric and power
Answer: C,E
NEW QUESTION 19
A customer is looking to add StoreVirtual VSA to their HPE Synergy environment. Which questions should you ask to ensure success?
- A. Which applications are running?
- B. Which servers are currently being utilized?
- C. Is fiber channel or iSCSI being utilized?
- D. Is there adequate rack space for expansion?
Answer: A
NEW QUESTION 20
A customer uses VLANs for tenant network separation. However, they are not satisfied with the scalability limits of the setup.
Which networking technology will help the service provider to overcome these performance limits?
- A. remote direct memory access (RDMA)
- B. RDMA over Converged Ethernet (RoCE)
- C. network virtualization generic routing encapsulation (NVGRE)
- D. data center bridging (DCB)
Answer: C
NEW QUESTION 21
A customer is planning an expansion and they are considering iLO Amplifier as their future firmware management tool. They need to plan their budget and learn which additional licenses will be required.
What is the minimum license that will meet this customer's upgrade path needs?
- A. iLO Advanced Premium Security Edition
- B. iLO Advanced license
- C. Insight Control server provisioning license
- D. Insight Cluster Management Utility license
Answer: B
NEW QUESTION 22
A customer wants to use the automated zoning feature of HPE OneView. A customer complains that this functionality does not work, even if 3PAR and CPGs are added to HPE OneView.
Which other steps must be performed before automated zoning can be used? (Choose two.)
- A. Add the supported SAN Manager to HPE OneView
- B. Apply extended FC licenses to Virtual Connect downlink ports using HPE OneView
- C. Enable Data Center Bridging functionality on VC modules
- D. Associate managed SANs with a FC or FCoE network
- E. Activate WBEM Providers on supported 3Par arrays
Answer: A,D
NEW QUESTION 23
A customer has a ProLiant DL-based server solution. The customer is experiencing I/O timeouts on their SQL data volume running on this solution. Which solution will increase the application performance?
- A. Install an SSD drive to host the log volume
- B. Upgrade memory to 2666 MHz DDR4
- C. Upgrade the current processor to a Xeon-Platinum
- D. Install an SSD drive and SmartCache license
Answer: C
NEW QUESTION 24
Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?
- A. Another composer is needed Frame 3
- B. Composer 2 is in the wrong frame
- C. The management network should be connected to the top and bottom frames
- D. The management ring should be connected using the FLM link ports
Answer: A
NEW QUESTION 25
A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers. You need to review their existing installation and provide recommendations on how to achieve their stated storage density goal of over
5PB per server cabinet.
Which HPE solution should you recommend?
- A. HPE Apollo 6500
- B. HPE DL580 Gen10
- C. HPE ML350 Gen10
- D. HPE Apollo 4510
Answer: D
NEW QUESTION 26
A customer that runs a database server needs high speed access to the database files.
Which internal storage technology offers the best performance?
- A. SATA HDD
- B. SAS HDD
- C. NVMe
- D. SAS Nearline
Answer: C
NEW QUESTION 27
......
Nov-2021 Latest Free4Torrent HPE0-S54 Exam Dumps with PDF and Exam Engine: https://www.free4torrent.com/HPE0-S54-braindumps-torrent.html