Get Latest [Jan-2022] Conduct effective penetration tests using Free4Torrent NSE7_SDW-6.4
Penetration testers simulate NSE7_SDW-6.4 exam PDF
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 20
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- B. The reverse shaper option must be enabled and a traffic shaper must be selected
- C. The guaranteed-10mbps option must be selected as the reverse shaper option.
- D. The guaranteed-10mbps option must be selected as the per-IP shaper option
Answer: C
NEW QUESTION 21
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set source 100.64.1.1.
- B. Set cost 15.
- C. Set priority 10.
- D. Set load-balance-mode source-ip-ip-based.
Answer: A
NEW QUESTION 22
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Port1 became dead because no traffic was offload through the egress of port1.
- B. SD-WAN member interfaces are affected by the SLA state of the inactive interface.
- C. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- D. Both SD-WAN member interfaces have used separate SLA targets.
Answer: C
NEW QUESTION 23
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two.)
- A. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
- B. It acts as a policy compliance entity to review all managed FortiGate devices.
- C. It improves SD-WAN performance on the managed FortiGate devices.
- D. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
- E. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
Answer: B,E
NEW QUESTION 24
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. 100.64.3.1 is one of the remote IP address that comes through index interface 1.
- B. VPN static routes are prevented from populating the FortiGate routing table.
- C. FortiGate created a single IPsec virtual interface that is shared by all clients.
- D. There are separate virtual interfaces for each dial-up client.
Answer: A,C
NEW QUESTION 25
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Dead members require manual administrator access to bring them back alive
- B. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- C. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
- D. Port2 might become alive when a single response is received from an SLA server
Answer: C
NEW QUESTION 26
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. Each VPN device has a unique pre-shared key configured separately on phase one.
- B. On the hub VPN, only the device needs additional phase one settings.
- C. The protected subnets should be set to address object to all (0.0.0.0/0).
- D. ADVPN should only be enabled on unmanaged FortiGate devices.
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 27
Which components make up the secure SD-WAN solution?
- A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- B. Telephone, ISDN, and telecom network.
- C. Application, antivirus, and URL, and SSL inspection
- D. Datacenter, branch offices, and public cloud
Answer: A
NEW QUESTION 28
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Configure SD-WAN rules interface preference.
- B. Specify incoming interfaces in SD-WAN rules.
- C. Specify outgoing interface routing cost.
- D. Select SD-WAN balancing strategy.
Answer: A,C
NEW QUESTION 29
Which statement about using BGP routes in SD-WAN is true?
- A. Learned routes can be used as dynamic destinations in SD-WAN rules.
- B. VPN topologies must be form using only BGP dynamic routing with SD-WAN.
- C. Adding static routes must be enabled on all ADVPN interfaces.
- D. Dynamic routing protocols can be used only with non-encrypted traffic.
Answer: A
Explanation:
Explanation/Reference:
https://www.fortinetguru.com/2019/09/using-bgp-tags-with-sd-wan-rules-fortios-6-2/#:~:text=SD%2DWAN%
20rules%20can%20use,to%20the%20customer's%20data%20center.
NEW QUESTION 30
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- D. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
Answer: D
NEW QUESTION 31
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. Matched traffic failed RPF and was caught by the rule.
- B. The FIB lookup resolved interface was the SD-WAN member interface
- C. Traffic has matched none of the FortiGate policy routes
- D. An absolute SD-WAN rule was defined and matched traffic
Answer: C,D
NEW QUESTION 32
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Application signatures
- B. Type of physical link connection
- C. URL categories
- D. Source and destination IP address
- E. Internet service database (ISDB) address object
Answer: B,D,E
NEW QUESTION 33
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The web filter profile must be enabled on the firewall policy
- B. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- C. The URL category must be specified on the traffic shaping policy
- D. The application control profile must be enabled on the firewall policy.
Answer: A
NEW QUESTION 34
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. FortiGate created a single IPsec virtual interface that is shared by all clients
- B. There are separate virtual interfaces for each dial-up client
- C. 100.64.3.1 is one of the remote IP address that comes through index interlace 1.
- D. VPN static routes are prevented from populating the FortiGate routing table
Answer: B
NEW QUESTION 35
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Reverse policy shaping mode
- B. Interface-based shaping mode
- C. Per-IP shaping mode
- D. Shared policy shaping mode
Answer: D
NEW QUESTION 36
......
Tested Material Used To NSE7_SDW-6.4 Test Engine: https://www.free4torrent.com/NSE7_SDW-6.4-braindumps-torrent.html
Steps Necessary To Pass The NSE7_SDW-6.4 Exam: https://drive.google.com/open?id=1itT2ovgPUfj49LTid8zjUlpohT2gCVVc