Get NCP-MCI-5.15 Actual Free Exam Q&As to Prepare for Your Nutanix Certification
Nutanix Actual Free Exam Questions And Answers
Introduction of Nutanix NCP-MCI-5.15 Exam
Nutanix is integrated storage, networking, and computing platform built on open standards that enable organizations to address their most important challenges scaling up and scaling out. It has a unique multi-cloud architecture that can deliver any workload from any cloud or storage provider onto Nutanix integrated infrastructure. Its hyper-converged architecture eliminates the need for costly and complex hardware and software deployments to achieve the same level of performance and scalability. Nutanix NCP-MCI-5.15 Dumps helps IT, professionals, to get the job done efficiently by saving time and money. Host VMs in Nutanix on their own private cloud. It has unique features like self-service, self-optimization, and elasticity.
The Nutanix Enterprise Cloud Platform is powered by the Nutanix Enterprise Storage Platform. Server less functions with dynamic function graphs and built-in security capabilities are integrated with Nutanix to enable enterprises to build, run, and manage their applications in a serverless, pay-as-you-go environment. Question Describe how Nutanix is built on open standards. Answer: Nutanix is built on open standards. Nutanix is a private cloud platform that is built on open standards. Network protocols used in the Nutanix platform include HTTP, HTTPS, SMTP, IMAP, SSH, POP3, SFTP, and FTPS. The Nutanix platform also supports WebSocket, REST, and binary protocols. Nutanix runs on Hyper-V, VMware, XenServer, and KVM.
How to start taking the Nutanix NCP-MCI-5.15 Exam
You can get a guide for the Nutanix NCP-MCI-5.15 Exam
If you don't have time to read everything, there are tips to survive.
This article gives you information about the National Check Payments Certification Exam, which is required to obtain the Nutanix Certified Professional - Multi-Cloud Infrastructure (NCP-MCI-5.15) certification. In addition to learning how to prepare for the NCPC exam. Nutanix NCP-MCI-5.15 Dumps will also cover topics such as the types of questions that you will see on the exam. You will also learn how to plan your study time to ensure that you are able to pass the exam on the first attempt. Practice Test to get a good idea of what you can expect on the exam before purchasing the official Nutanix NCP-MCI-5.15.
For more information about the Facebook 200-101 Exam visit the following reference link:
Nutanix NCP-MCI-5.15 Exam's Reference link
NEW QUESTION 27
Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)
- A. Add all VMs to a new VLAN other than VLAN 0.
- B. Add the CVM and the AHV host to the same VLAN.
- C. Avoid adding guest VMs to the CVM and host VLAN.
- D. Add all VMs to the default VLAN0 on bridge br1.
Answer: A,B
NEW QUESTION 28
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Add the node to the cluster and leave the existing AOS version in place
- B. Destroy cluster and foundation with the new node in place
- C. Perform standalone reimage of the new node and then add to cluster
- D. Add the node to the cluster and reboot all running VMs to use new release
Answer: C
NEW QUESTION 29
Client needs a backup solution to allow the ability to replicate small data sets to public cloud. The RPO of this tertiary data must be 24 hrs or better.
Which solution should an engineer recommend to the client base on these requirement?
- A. Cloud Connect
- B. XI Cloud service
- C. Protection Domain
- D. NearSync
Answer: A
NEW QUESTION 30
An Engineer logs into a CVM to troubleshoot connectivity loss between two CVMs and find the following interfaces subnets and WLANs configured.
-eth0 - VLAN10-10.1.10.0/24
eth01-No VLAN-192.168.5.0/24
eth2 - LAN20-10.1.20.0/24
Which two Nutanix networking features are being utilized? (Choose two)
- A. IP address management (IPAM)
- B. Network Load balancing
- C. Backplane LAN
- D. Internal vSwitch
Answer: C,D
NEW QUESTION 31
A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?
- A. The AHV pre-upgrade checks fail until the four VMs are powered off.
- B. The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.
- C. One node hosts two VMs while the node being upgraded is in maintenance mode.
- D. One VM out of the four powers down when the node hosting it reboots.
Answer: B
NEW QUESTION 32
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?
- A. allssh manage_ovs show_uplinks
- B. allssh show_uplinks
- C. manage_ovs show_uplinks
- D. manage ovs show uplinks
Answer: A
NEW QUESTION 33
An administrator is migrating workloads to a nutanix cluster. While the Nutanix cluster is ingesting data from the migration, the utilization of the SSDs increases, periodically drops to approximately 75% utilization, then continues to increase.
Which Distributed Storage Fabric (DSF) concept is causing the behavior?
- A. Data Path Resiliency
- B. Virtual Machine Snapshotting and cloning
- C. Redundancy Factor 2 (RF2)
- D. Information Lifecycle Management (ILM)
Answer: A
NEW QUESTION 34
In Files, how many FSVMs are deployed by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 35
Which two image types are stored by the Nutanix Image Service? (Choose two)
- A. Disk
- B. QCOW2
- C. VHDX
- D. ISO
- E. VMDK
Answer: A,D
NEW QUESTION 36
An administrator needs to shut down and relocate a Nutanix cluster.
Which step should the administrator take after shutting down all guest VMs on the cluster?
- A. Put each host into maintenance mode
- B. Execute the command: cluster stop on a CVM
- C. Change the node and CVM IP addresses if necessary
- D. Execute the command: cluster restart_genesis on a CVM
Answer: B
NEW QUESTION 37
An administrator has just executed a maintenance window for some applications running on their nutanix cluster. After completing the maintenance, they want to assess the health of the cluster and make sure that there is no impact during the maintenance.
Which three dashboards in prism will assist the administrator in making this determination? (Choose Three)
- A. Analysis
- B. Data Protection
- C. Alerts
- D. Tasks
- E. Cluster Health
Answer: B,C,E
NEW QUESTION 38
Which feature must be enabled in order to ensure that VMs are restarted on other hosts in the event of a host failure?
- A. Network Segmentation
- B. High Availability
- C. Live Migration
- D. VM Snapshots
Answer: B
NEW QUESTION 39
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Health Dashboard > Manage Checks > Schedule
- B. Alerts Dashboard > Manage Checks > Schedule
- C. Health Dashboard > Manage Crocks > Frequency
- D. Alerts Dashboard > Manage Checks > Frequency
Answer: A
NEW QUESTION 40
An administrator cables all interfaces on a newly added AHV host and starts migrating VM to 4. Users report that network connections are much slower to the VMs after the migration.
What is a possible reason for this issue.?
- A. The network is slower because the host is further away.
- B. The host still has the default bond configuration.
- C. The CVM on the node has not fully joined
- D. The VMs do not use the same interfaces as the CVM.
Answer: B
NEW QUESTION 41
An administrator needs to configure Acropolis File Service (AFS). The administrator is setting up AFS for the first time on the Nutanix cluster.
How many file services VMs are created by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 42
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 43
The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.
How should the administrator fix this issue?
- A. Access the CVM on the host that is running the VM:
*Open acli
*Run a command to increase the amount of RAM assigned to the VM - B. Go to Control Panel in the VM:
*Select the Computer Properties
*Increase the amount of RAM assigned - C. During the next maintenance window:
*Select the VM from the VMs list
*Perform a graceful shutdown - D. From the Prism web console:
*Go to the VM dashboard
*Select the VM from the VMs list
*Choose Update
*Adjust the amount of memory assigned to the VM
Answer: C
NEW QUESTION 44
......
NCP-MCI-5.15 Questions Truly Valid For Your Nutanix Exam: https://www.free4torrent.com/NCP-MCI-5.15-braindumps-torrent.html