HPE0-J68 PDF Pass Leader, HPE0-J68 Latest Real Test
Valid HPE0-J68 Test Answers & HPE0-J68 Exam PDF
NEW QUESTION 106
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?
- A. Frame filtering
- B. Enhanced group management
- C. Quality of services
- D. Traffic isolation Zones
Answer: D
NEW QUESTION 107
A customer implemented the HPE StoreEver MSL6480 Tape Library.
Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?
- A. StoreEver Data Verification
- B. StoreServe TapeAssure Advanced
- C. InfoSight
- D. OneView
Answer: B
NEW QUESTION 108
Which SAN topology offers the highest centralized data access performance?
- A. Cascaded
- B. Core-Edge
- C. Meshed
- D. Ring
Answer: B
NEW QUESTION 109
Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?
- A. processor
- B. host
- C. physical disk
- D. ASIC
Answer: C
NEW QUESTION 110
A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.
Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)
- A. Fabric Watch
- B. Fabric Vision
- C. Extended Fabrics
- D. MAPS
- E. Advanced Trunking
Answer: A,B
NEW QUESTION 111
You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- B. Target drive type must match source drive type
- C. No license is required
- D. RMC 6.2 is required
- E. 2-port 10 Gb Ethernet Adapter (NIC) is required
Answer: A,D
NEW QUESTION 112
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Enables automatic transparent failover
- B. Integration capabilities utilizing HTML
- C. Includes Peer Copy asynchronous replication
- D. Manual data provisioning and policy-based copy protection
- E. Less expensive than traditional backup
Answer: C,E
NEW QUESTION 113
A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?
- A. To easily move workloads to AWS or Azure in the event of site disaster.
- B. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.
- C. To regularly send backups to the cloud for the purposes of DR protection.
- D. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR and StoreOnce.
Answer: C
NEW QUESTION 114
A customer wants to implement a management and monitoring tool for an HPE B-series SAN switch environment. You plan to recommend the HPE SAN Network Advisor.
Which information about the customer's environment will help you to decide which edition to recommend?
- A. Fabric OS version
- B. Amount of used fabrics
- C. FCoE support
- D. FCIP support
Answer: B
Explanation:
- SAN Network Advisor is available in three types of bundles: * No-charge SAN Professional: Up to 300 switch ports, 2 fabrics, B-series Fabric OS only. * For-charge SAN Professional Plus: Up to 2560 switch ports and 36 fabrics. * For-charge SAN Enterprise: Up to 15000 switch ports and 100 fabrics. This bundle is required for B-series DC SAN Backbone Director, SN8000B 8-Slot SAN Director and FICON management.
NEW QUESTION 115
Exhibit:
The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS storage configuration to support oracle database volume to utilize HPE 3PAR compression .
Based on the analysis of the array .what would be your suggestion to implement the requested change?
- A. Balance the workloads between the arrays to have enough headroom for compression
- B. Configure the source-side the compression to offload compression to the Host
- C. Install the catalyst agent on the oracle server to enable inline compression on the selected VV
- D. Consider adding another node pair for compression to work efficiently
Answer: C
NEW QUESTION 116
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)
- A. ZFS
- B. NTFS
- C. NFS
- D. VFS
- E. CIFS
Answer: C,E
NEW QUESTION 117
An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?
- A. Nimble CS series
- B. Nimble cloud volume
- C. Nimble AF series
- D. Nimble SF series
Answer: C
NEW QUESTION 118
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Multi-tenancy
- B. Federated storage
- C. Autonomic Management
- D. Scale out storage
Answer: A
NEW QUESTION 119
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
- A. 94:b4:0f:cd:34:8a
- B. iqn.2015-02.com.hpe:oneview-vcgeDav000
- C. 172.16.31.11/24
- D. 20110002AC00736E235.524
Answer: D
NEW QUESTION 120
Which type of networking switch handles both Ethernet and fibre channel traffic?
- A. Converged
- B. Virtual
- C. Edge
- D. Director
Answer: A
NEW QUESTION 121
A customer has a Nimble HF40 and needs to create a support ticket.
Click the option in the InfoSight portal where the customer can perform this task.
Answer:
Explanation:
NEW QUESTION 122
Refer to the exhibit.
You are configuring a new HPE array and verifying properties of a set of volumes.
Which RAID level is used on the VMwareDatastores-GF volume?
- A. Triple Parity+
- B. RAID 5
- C. RAID 6
- D. RAID 0
Answer: B
NEW QUESTION 123
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)
- A. HPE 3PAR Security software suite
- B. HPE 3PAR File persona Software suite
- C. HPE 3PAR Remote copy software
- D. HPE StoreOnce recovery manager central for VMware
- E. HPE 3PAR Virtual Copy software
Answer: D,E
NEW QUESTION 124
Match the HPE converged Strategy principle with its function
- A. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.
- B. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
- C. Deduplication:-Reduce allocated capacity by eliminating data redundancy
- D. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
- E. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively
Answer: A
NEW QUESTION 125
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Express Indexing
- B. Persistent Cache
- C. Zero Detect
- D. Express Writes
Answer: D
NEW QUESTION 126
Which statement is correct when comparing functionalities of the AF and HF series in the Nimble storage portfolio? (Choose Two)
- A. >99.9999% availability is measured and guaranteed for AF and HF series arrays.
- B. HF series has a dedicated read cache and AF series does not have a dedicated reach cache.
- C. HF series supports storage snapshots and replication using Veeam Backup & Replication, HF and AF series support storage snapshots only
- D. Zero Copy Clones are a unique feature of All-Flash arrays within the Nimble Portfolio.
Answer: A,B
NEW QUESTION 127
Which tool is used to determine current compaction ratios on Primera arrays?
- A. SSMC System Reporter
- B. WebUI
- C. Storage Management Utility (SMU)
- D. NinjaStars
Answer: A
NEW QUESTION 128
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)
- A. host
- B. application
- C. operating system
- D. Ethernet network (LAN)
- E. storage
- F. ISCSI network(SAN)
Answer: A,B,F
NEW QUESTION 129
What is the benefit of HPE Synergy? (Choose two.)
- A. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
- B. It can use HPE 3PAR File Persona for object storage.
- C. It can prevent block storage services from HPE 3PAR as part of the resource pool.
- D. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
- E. It can compose and reclaim DAS storage.
Answer: C,E
NEW QUESTION 130
A customer wants to make a full copy replica of a database to use for performance testing.
Which technology should they use to create the copy?
- A. clone
- B. deduplication
- C. synthetic full
- D. snapshot
Answer: D
NEW QUESTION 131
......
HPE0-J68 Dumps Ensure Your Passing: https://www.free4torrent.com/HPE0-J68-braindumps-torrent.html
HPE0-J68 exam dumps and online Test Engine: https://drive.google.com/open?id=19capX9npYx3DLAXW-1XLu-_IvcUr9KtT