[Jan 20, 2022] Ultimate NS0-527 Guide to Prepare Free Latest Network Appliance Practice Tests Dumps [Q104-Q123]

[Jan 20, 2022] Ultimate NS0-527 Guide to Prepare Free Latest Network Appliance Practice Tests Dumps

Get Top-Rated Network Appliance NS0-527 Exam Dumps Now

NetApp NS0-527 Exam Certification Details:

NEW QUESTION 104
You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.
In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)

• A. Perform a SnapMirror break operation.
• B. Perform a SnapMirror quiesce operation.
• C. Disable the source volume by taking it offline.
• D. Verify the status of the source and destination volumes.
• E. Configure the destination volume for data access.

Answer: A,D,E

NEW QUESTION 105
How are the FC-VI links cabled in MetroCluster for ONTAP?

• A. directly to the corresponding local HA partner
• B. controller A is cabled to FC switch A, controller B has both cabled to FC switch B
• C. directly to the corresponding remote HA partner
• D. one cable to each of the two local FC switches

Answer: D

NEW QUESTION 106
Beginning with On Command Workflow Automation 3.0, which feature allows you to download and manage your WFA workflow packs from the NetApp resources.

• A. Workflow Automation External Data Sources
• B. Storage Automation Store
• C. WorkflowAutomation Database
• D. Workflow Automation Community

Answer: B

NEW QUESTION 107
You want to conserve disk space in your SnapVault destinations. You enablestorage efficiency on each of the secondary volumes.
Which two statements are true in this scenario? (Choose two.)

• A. SnapVault implicitly uses storage efficiency.
• B. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.
• C. Storage efficiency can beenabled on the secondary volume, but a manual schedule will need to be assigned.
• D. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.

Answer: B,D

NEW QUESTION 108
A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.
How do you make this change in ONTAP?

• A. Restart the NDMP service on the cluster.
• B. Turn off node-scoped NDMP on the cluster.
• C. Restart the NDMP service on the SVMs being backed up.
• D. Turn off node-scoped NDMP on the SVMs being backed up.

Answer: B

NEW QUESTION 109
A Windows user requests assistance to restore afile on a CIFS share that they have mistakenly deleted.
Which tool would restore the deleted file?

• A. OnCommand Unified Manager
• B. OnCommand Systems Manager
• C. Windows Unified Host Utilities
• D. Windows Shadow Copy Client

Answer: D

NEW QUESTION 110
You are configuring SnapMirror on the NetApp Cloud Backup appliance (formerly AltaVault).
In this scenario, which LIF type IP addresses must be white listed?

• A. nodemanagement
• B. cluster management
• C. cluster
• D. intercluster

Answer: D

NEW QUESTION 111
You do not want to impact your ongoing SnapMirror relationship between your primary and secondary site.
Which step must be taken prior to creating a FlexClone at the disaster recovery site?

• A. Cascade the SnapMirror destination volume to another SnapVault destination.
• B. Cascade the SnapMirror destination volumeto another SnapMirror destination.
• C. Create a Snapshot copy of the SnapMirror destination volume.
• D. Create a Snapshot copy of the SnapMirror source volume and wait for it totransfer.

Answer: D

NEW QUESTION 112
You have deployed a 4-node fabric MetroClusterconfiguration for cross-site disaster-recovery protection.
In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation? (Choose two.)

• A. AUSO is enabled by default on a MetroCluster cluster.
• B. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
• C. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
• D. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.

Answer: A,C

NEW QUESTION 113
A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?

• A. Modify the Snapshot reserve.
• B. Delete enough Snapshot copies untilspace is available.
• C. Delete any SnapMirror relationships.
• D. Delete files in the active file system.

Answer: B

NEW QUESTION 114
A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.
In this scenario, what would you do to reestablish the storage failover capability on your cluster?

• A. Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.
• B. Deploy two single-node ONTAP Select clusters and migrate all exiting data.
• C. Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.
• D. Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.

Answer: B

NEW QUESTION 115
A customer wants tochange a SnapMirror replication schedule to update more frequently.
They have 25 GB of data per update to be replicated along a single 1 Gbps Ethernet link.
In this scenario, what is the minimum amount of time required between SnapMirror updates?

• A. 200 minutes
• B. 5 minutes
• C. 3 minutes
• D. 20 minutes

Answer: D

NEW QUESTION 116
Click the Exhibit button.

You areconfiguring a SnapMirror relationship to capture all daily activities and archive them. Information about the environment is shown in the exhibit.
In this scenario, how much data must be transferred during the scheduled SnapMirror update?

• A. 150 GB
• B. 50 GB
• C. 200 GB
• D. 250 GB

Answer: C

NEW QUESTION 117
You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.
What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?

• A. Break the SnapMirrorrelationship and validate the data.
• B. Perform a SnapMirror reverse resynchronization to restore the data from the destination cluster to the source cluster, and validate the data.
• C. Use SyncMirror on the destination aggregate on the destination cluster, and validate the data.
• D. Create a FlexClone volume of the destination volume on the destination cluster, and validate the data.

Answer: B

NEW QUESTION 118
When volumes are set to be thin-provisioned, what must be monitored for space usage?

• A. LUN
• B. aggregate
• C. volume clone space
• D. Snapshot reserve

Answer: B

NEW QUESTION 119
Which two statements describe a Snapshot copy prefix? (Choose two.)

• A. A prefix isan optional string that you can specify to be used in creating automatic Snapshot copies.
• B. A Snapshot copy prefix must be unique within the Snapshot copy policy.
• C. The Snapshot copyprefix allows the Snapshot copy name to be longer than 255 characters.
• D. A prefix is a numerical string used to identify the number of Snapshot copies in the volume.

Answer: A,B

NEW QUESTION 120
A client has a primary data center that islocated in a coastal area where the forecast is calling for a Category 5 hurricane to make landfall in three days. The client's data is protected using NetApp SVM SnapMirror replication technology with identity-preserve that is enabled. The data is mirrored to a destination cluster outside of the affected area. The client has scheduled a controlled maintenance window for tomorrow to ensure that dependable operations are maintained.
Which three steps must be taken to accomplish this task? (Choose three.)

• A. You must break the SnapMirror relationship on each individual volume between the source and the destination clusters.
• B. You must stop the source SVM before activating the destination SVM.
• C. You must break the SnapMirror relationship between the source and the destination SVMs.
• D. You must configure the destination SVM volumes for data access.
• E. You must reboot each server in your infrastructure so that they can access the data from the destination volumes.

Answer: B,C,D

NEW QUESTION 121
A customer wants to assign a user to a build-in SnapCenter RBAC Role that will allow them to review and start existing SnapMirror processes only.
In this scenario, which Role will allow the customer to accomplish this task?

• A. Infrastructure Admin
• B. SnapCenter Admin
• C. Backup and Clone Viewer
• D. App Backup and Clone Admin

Answer: B

NEW QUESTION 122
You notice that after you delete data from your FlexVol volume, some Snapshot copies have also been deleted. Snapshot auto delete is enabled.
Which volume autosize mode must be enabled for this behavior to occur?

• A. disrupt
• B. grow
• C. grow_shrinik
• D. off

Answer: A

NEW QUESTION 123
......

NetApp NS0-527 Exam Topics:

Passing Key To Getting NS0-527 Certified Exam Engine PDF: https://www.free4torrent.com/NS0-527-braindumps-torrent.html

NS0-527 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1Wa7NM5mKoE3qVsxdPPYuJNqpTDrUOEmb