Latest [Aug 29, 2021] HPE6-A71 Exam with Accurate Aruba Certified Mobility Professional Exam PDF Questions
Take a Leap Forward in Your Career by Earning HP 173 Questions
NEW QUESTION 49
A company opens a new branch office and a RAP is used to connect to a corporate office Aruba Mobility Controller (MC). The company needs to provide connectivity to the office across the street.There is an AP across the street. However, there is no wired connectivity between the buildings.
Which actions can the administrator select to provide the required connectivity? (Choose two.)
- A. Implement two mesh clusters.
- B. Provision all Aps at the branch offices as Mash Portals.
- C. Provision all Aps at the branch office as Mesh Points.
- D. Implement one of the Aps as a Mesh Point.
- E. Provision the RAP as a Mesh Portal.
Answer: C,E
NEW QUESTION 50
A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote Mesh Portal (RMP).
Which solution should the administrator implement to provide connectivity between the office and small warehouse buildings at the branch office location?
- A. Deploy a Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.
- B. Deploy a Remote Mesh Portal in the warehouse building to connect to the Remote Mesh Portal in the office building.
- C. Deploy an ArubaOS-Switch in the warehouse building with tunneled node to connect to the Remote Mesh Portal in the office building.
- D. Deploy a Remote Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 51
An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a non- cluster deployment. The administrator performs these tasks on the MM for the MCs:
* Enables L3 IP mobility for the respective VAPs on the MCs
* Creates a L3 domain and places the MCs in the domain
However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.
What must the administrator do to fix this problem?
- A. Configure the same VLANs on the Mobility Controllers in the L3 domain.
- B. Enable L3 IP Mobility globally on the Mobility Controllers.
- C. Create a home-agent-to-foreign-agent mapping table.
- D. Re-provision the APs associated with the Mobility Controllers.
Answer: C
NEW QUESTION 52
What is true about the operation of the Aruba Mobility Controller (MC) shown below?
- A. The Mobility Master is in disaster recovery mode and will push changes to a Managed Controller.
- B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- C. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- D. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
Answer: B
NEW QUESTION 53
Refer to the exhibit.
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. User load balancingis enabled.
- B. This is an L2-connected cluster.
- C. This is an L3-connected cluster.
- D. AP load balancing is enabled.
Answer: D
NEW QUESTION 54
Refer to the exhibit.
What can an administrator determine from this Aruba device output?
- A. An AP is connected to a standalone Mobility Controller.
- B. A switch is connected to a Mobility Controller in a cluster.
- C. An AP is connected to a Mobility Controller in a cluster.
- D. A switch is connected to astandalone Mobility Controller.
Answer: B
NEW QUESTION 55
Refer to the exhibit.
What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?
- A. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
- B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- C. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- D. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
Answer: B
NEW QUESTION 56
A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?
- A. The AP has reached the limit for number of users that are allowed to connect to the radio.
- B. The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.
- C. The user misconfigured the Managed Network Settings profile in Windows.
- D. The controller cannot reach the AAA server to perform the authentication.
Answer: B
NEW QUESTION 57
An Administrator supports a group of employees that connect to the corporate office using the VIA client. An Aruba Mobility Controller (MC), behind a corporate firewall, terminates the user's VPN sessions. The VPN sessions fail to establish because of the existing firewall rules.
Which connections must the administrator allow on the firewall? (Choose three.)
- A. UDP 8202
- B. TCP 443
- C. UDP 8211
- D. TCP 4443
- E. UDP 500
- F. UDP 4500
Answer: A,B,F
NEW QUESTION 58
Which network components are tracked by Aruba Clarity? (Choose two.)
- A. DNS lookups
- B. WLAN health
- C. AP and controller health
- D. Client health
- E. Wireless associations
Answer: A,E
NEW QUESTION 59
Refer to the exhibit.
An administrator examines theconfiguration of an AP from apboot mode shown in the exhibit.
What can the administrator determine from the configuration?
- A. RAP terminated on a Mobility Master.
- B. AP terminated on a Mobility Controller in a cluster.
- C. RAP terminated on a stand-alone controller.
- D. AP terminated on a non-cluster Mobility Controller.
Answer: B
NEW QUESTION 60
Refer to the exhibit.
What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?
- A. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
- B. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- C. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- D. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
Answer: C
NEW QUESTION 61
A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers (MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are nearing thecapacity of the cluster. The administrator wants to increase AP capacity.
How can the administrator solve the problem?
- A. Add a 7220 controller to the existing cluster.
- B. Add a Virtual Mobility Controller to the existing cluster.
- C. Add a 7030 controller to the existing cluster.
- D. Add a new controller to the Mobility Master.
Answer: B
NEW QUESTION 62
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- B. Have the MultiZone APs initially boot from the standalone controller in the data zone.
- C. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- D. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
Answer: A
NEW QUESTION 63
An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. apmove
- B. active-ap-lb
- C. active-ap-rebalance
- D. lc-cluster move ap
Answer: A
NEW QUESTION 64
Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?
- A. Bridge
- B. Decrypt-tunnel
- C. Split-tunnel
- D. Tunnel
Answer: B
NEW QUESTION 65
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS controller configured for per-user tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS-Switch configured for per-port tunneled node.
- D. This is an ArubaOS-Switch configured for per-user tunneled node.
Answer: C
NEW QUESTION 66
A guest establishes an authenticated wireless session to an ArubaMobility Controller (MC). The controller uses a ClearPass server for all AAA functions.
Which AAA component disconnects the user when the guest exceeds their allowed duration?
- A. RADIUSAuthorization Profile
- B. Active Directory Session Limits
- C. RADIUS Change of Authorization
- D. SNMP Disconnect
Answer: C
NEW QUESTION 67
Which RAP WLAN operation mode should an administrator configure if the SSID should only be advertised if controller connectivity is lost?
- A. Always
- B. Standard
- C. Persistent
- D. Backup
Answer: D
NEW QUESTION 68
An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?
- A. in Device Setup
- B. in Groups
- C. in AP/Devices
- D. in AMP Setup
Answer: C
NEW QUESTION 69
Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS 8.x?
- A. RAP
- B. BLE Beacon
- C. Mobility Master
- D. IAP
Answer: A
NEW QUESTION 70
In a cluster-controller environment, which Aruba component in a network builds a cache table of mDNS records that can be used to help user devices access Apple Bonjour services?
- A. the Mobility Master
- B. the Mobility Controllers that are cluster members
- C. the Mobility Master and cluster members
- D. any Aruba Mobility Controller
Answer: A
NEW QUESTION 71
Refer to the exhibit. What can the administrator determine from the configuration shown in the exhibit?
- A. MM2 is the Mobility Master.
- B. All the controllers run in standalonemode.
- C. All the controllers run in a cluster.
- D. VRRP is used for Mobility Master redundancy.
Answer: A
NEW QUESTION 72
An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode.
Theadministrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.
What should the administrator do to solve this problem?
- A. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
- B. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
- C. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and then scan for the Virtual Mobility Controllers in AirWave.
- D. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, andhave AirWave repoll the Mobility Master.
Answer: D
NEW QUESTION 73
......
Authentic Best resources for HPE6-A71 Online Practice Exam: https://www.free4torrent.com/HPE6-A71-braindumps-torrent.html
Practice To HPE6-A71 - Free4Torrent Remarkable Practice On your Aruba Certified Mobility Professional Exam Exam: https://drive.google.com/open?id=1elyMs5iJKykay1xJowyJqhvSnS7GcJRZ