Latest DES-6322 Study Guides 2023 - With Test Engine PDF
Get New DES-6322 Practice Test Questions Answers
NEW QUESTION 41
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?
- A. Latency and bandwidth measurement to the witness host
- B. Latency measurement between DCs for Stretched Clusters
- C. Network performance for virtual machines
- D. Network configuration and performance for vSAN
Answer: D
Explanation:
NEW QUESTION 42
An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?
- A. At least 36 in (92 cm) clearance exists in front of and behind the cabinet
- B. Power distribution must support the power rating of a single node
- C. Single power zone must be used with adequate power cables
- D. Service laptop must be on the same IP network as the iDRACs
Answer: A
NEW QUESTION 43
Match each VxRail API request with the information to be retrieved.
Answer:
Explanation:
NEW QUESTION 44
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.
Answer:
Explanation:
Pending
Send your suggestions for this question.
NEW QUESTION 45
A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.
Which actions need to be performed?
- A. Validate that the latest updates and patches are installed in the system Validate that no pending and unfinished jobs are running on the servers
- B. Validate that no pending and unfinished jobs are running on the servers Verify that the server and storage components are working properly
- C. Verify the configuration settings initially captured in PEQ
Validate the storage environment - D. Verify VxRail nodes are racked and connected to the ToR switches
Validate the network environment
Answer: A
NEW QUESTION 46
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?
- A. Host name for both vCenter Server and for VxRail Manager
- B. Host name for vCenter Server FQDN for VxRail Manager
- C. FQDN for both vCenter Server and for VxRail Manager
- D. FQDN for vCenter Server Host name for VxRail Manager
Answer: D
NEW QUESTION 47
What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?
- A. vSAN has sufficient storage capacity
- B. Network firewalls are configured correctly
- C. vSAN operates successfully
- D. Network performance is sufficient
Answer: C
NEW QUESTION 48
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. Insufficient number of vSphere licenses
- B. Firmware of ESXi host needs to be updated
- C. bmc and bios are running older versions
- D. Invalid vCenter 5erver license
Answer: D
NEW QUESTION 49
Match each VxRail configuration with its related characteristic.
Answer:
Explanation:
NEW QUESTION 50
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 51
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?
- A. VxRail Manager VM must be changed to the default name to avoid an upgrade failure
- B. Secure boot must be enabled on the ESXi hosts for a successful upgrade
- C. External vCenter server must be upgraded after the VxRail is upgraded
- D. vCenter Server requires a temporary IP address on a different subnet before the upgrade
Answer: C
NEW QUESTION 52
What is a characteristic of the VxRail S Series node?
- A. Form factor of 2U4N
- B. Form factor of 1U1N
- C. Dense Flash disks
- D. Large form factor drives
Answer: B
NEW QUESTION 53
From what location should NVT for VxRail be run?
- A. Laptop connected to the first VxRail ESXi node
- B. VxRail network Top of Rack switch
- C. Workstation on the same network as VxRail Manager
- D. Jump server on a different network
Answer: A
NEW QUESTION 54
What is a consideration when implementing a custom VDS on a VxRail cluster?
- A. Supports only two NIC uplinks
- B. Supports only four NIC uplinks
- C. Supported with external and internal vCenter Servers
- D. Used by multiple clusters managed by a single vCenter instance
Answer: C
NEW QUESTION 55
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?
- A. Triggered Alarms > All Issues > Issues and Alarms
Triggered Alarms > vSAN > Health - B. Monitor > All Issues > Issues and Alarms
Monitor > vSAN > Health - C. Monitor > Issues and Alarms > All issues
Monitor > vSAN > Skyline Health - D. Triggered Alarms > Issues and Alarms > All issues
Triggered Alarams > vSAN > Skyline Health
Answer: B
NEW QUESTION 56
What must be used when deploying VxRail with a customer-supplied VDS?
- A. VxRail API with configuration file
- B. VxRail PowerShell SysBringUp Module
- C. Deployment Wizard using the step-by-step method
- D. Deployment Wizard using the configuration file method
Answer: C
NEW QUESTION 57
Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?
- A. systemctl restart vmware-loudmouth
- B. /usr/lib/vmware/loudmouth/bin/loudmouthd restart
- C. /etc/init.d/loudmouth restart
- D. systemctl restart loudmouth
Answer: A
NEW QUESTION 58
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?
- A. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data Sent Use the Download option
- B. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > System Use the Product Documentation option
- C. SSH to the VxRail Manager VM with the mystic user
SU to root
Go to the /opt/VxRail/config directory
SCP the initial-config json file to a local location - D. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directory GET the config-initial json file
Answer: A
NEW QUESTION 59
......
DES-6322 Dumps and Exam Test Engine: https://www.free4torrent.com/DES-6322-braindumps-torrent.html
EMC DES-6322 DUMPS WITH REAL EXAM QUESTIONS: https://drive.google.com/open?id=1QBURj4kHtL6MSZX05xi6l29a7h4wJVLc