[May 31, 2023] Fully Updated AZ-801 Dumps - 100% Same Q&A In Your Real Exam
Latest AZ-801 Exam Dumps - Valid and Updated Dumps
To successfully pass this exam, candidates must have a deep understanding of Windows Server, Azure AD, Azure Site Recovery, and Azure Update Management. They must also be familiar with Microsoft 365 services and tenant management, as well as PowerShell scripting and automation.
NEW QUESTION # 48
What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 49
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains the organizational units (OUs) shown in the following table.
In the domain, you create the Group Policy Objects (GPOs) shown in the following table.
You need to implement IPsec authentication to ensure that only authenticated computer accounts can connect to the members in the domain. The solution must minimize administrative effort.
Which GPOs should you apply to the Domain Controllers OU and the Domain Servers OU? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-firewall/configure-authentication-methods
NEW QUESTION # 50
The Default Domain Policy Group Policy Object (GPO) is shown in the GPO exhibit. (Click the GPO tab.)
The members of a group named Service Accounts are shown in the Group exhibit. (Click the Group tab.)
An organizational unit (OU) named ServiceAccounts is shown in the OU exhibit. (Click the OU tab.)
You create a Password Settings Object (PSO) as shown in the PSO exhibit. (Click the PSO tab.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/get-started/adac/introduction-to-active-directory-administrative-center-enhancements--level-100-#fine_grained_pswd_policy_mgmt
NEW QUESTION # 51
You have three servers named Server 1. Servers and Server3 that run Windows Server. The servers have the Hyper-V server rote installed and are configured in a Storage Spaces Deed cluster named Cluster1.
Cluster1 hosts a virtual machine named VM1 that has Windows Admin Center Installed.
You manage all servers and clusters by using Windows Admin Center.
You purchase an Azure subscription.
You need to configure email alerts in Azure Monitor for the following:
* Disk Capacity Utilization Over 80% for 10 Minutes
* Any critical alert in the cluster system event log
* Memory Utilization over 95% for 10 minutes
* Heartbeat fewer than 5 beats for 5 Minutes.
* CPU Utilization over 85 % for 10 Minutes.
* Any hearth service faults for the cluster
The solution must use the minimum amount of administrative effort.
What should you do?
- A. Configure Azure Monitor and manually install the Microsoft Monitoring Agent on Server1, Server2 and Server3
- B. From Azure portal, configure Azure Monitor and onboard Cluster1 by using Azure Arc.
- C. From Windows Admin Center, configure Azure Monitor and onboard clustered.
Answer: C
NEW QUESTION # 52
You have three servers named Host1, Host2, and VM1 that run Windows Server. Host1 and Host2 have the Hyper-V server role installed. VM1 is a virtual machine hosted on Host1.
You configure VM1 to replicate to Host2 by using Hyper-V Replica.
Which types of failovers can you perform on VM1 on each host? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 53
You have a server named Server1 that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts an ASP.NET Core web app named WebApp1 and the app's source files.
You install Docker on Server1.
You need to ensure that you can deploy WebApp1 to an Azure App Service web app from the Azure Container Registry.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION # 54
You need to meet technical requirements for Share1.
What should you use?
- A. Storage Replica
- B. File Server Resource Manager (FSRM)
- C. Storage Migration Service
- D. Server Manager
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/storage/storage-migration-service/overview
NEW QUESTION # 55
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a print server named Server1. All printers are deployed to users by using a Group Policy Object (GPO) named GPO1.
You deploy a new server named Server2.
You need to decommission Server1. The solution must meet the following requirements:
Migrate the shared printers to Server2 by using the Printer Migration Wizard.
Ensure that the users use the printers on Server2.
Minimize downtime for the users.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/archive/blogs/canitpro/step-by-step-migrating-print-servers-from-windows-server-2008-to-windows-server-2012
NEW QUESTION # 56
You have an on-premises server named Server1 and Microsoft Sentinel instance.
You plan to collect windows Defender Firewall events from Sever1 and analyze the event data by using Microsoft Sentinel.
What should you install on Server1, and which information should you provide during the instance? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 57
Your network contains an Active Directory Domain Services (AD DS) domain All domain members have Microsoft Defender Credential Guard with UEFI tock configured in the domain you deploy a server named Server1 that runs Windows Server. You disable Credential Guard on Server1. You need to ensure that Server1 is MOST subject to Credential Guard restrictions. What should you do next?
- A. Run the Device Guard and Credential Guard hardware readiness tool
- B. Run dism and specify the /Disable-Feature and /FeatureName:IsolatedUserMode parameters
- C. Disable the Turn on Virtual nation Based Security group policy setting
Answer: C
NEW QUESTION # 58
You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant.
The AD DS domain contains a domain controller named DC1. DC1 does NOT have internet access.
You need to configure password security for on-premises users. The solution must meet the following requirements:
* Prevent the users from using known weak passwords.
* Prevent the users from using the company name in passwords.
What should you do? To answer, drag the appropriate configurations to the correct targets. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-password-ban-bad-on-premises-de
NEW QUESTION # 59
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)
The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)
Server1 shuts down unexpectedly.
You need to ensure that when you start Server1, App1 continues to run on Server2.
Solution: From the General settings, you move Server2 up.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Server1 and Server2 are both unticked so the order they are listed in has no effect on whether the cluster will fail back.
NEW QUESTION # 60
You are planning the migration of APP3 and APP4 to support the Azure migration plan.
What should you do on Cluster1 and in Azure before you perform the migration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-hyper-v
NEW QUESTION # 61
You need to meet the technical requirements for Cluster2.
Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Text Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-tutorial
NEW QUESTION # 62
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)
The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)
Server1 shuts down unexpectedly.
You need to ensure that when you start Server1, App1 continues to run on Server2.
Solution: From the General settings, you move Server2 up.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation
Server1 and Server2 are both unticked so the order they are listed in has no effect on whether the cluster will fail back.
NEW QUESTION # 63
You need to implement a security policy solution to authorize the applications. The solution must meet the security requirements.
Which service should you use to enforce the security policy, and what should you use to manage the policy settings? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-defender-application-control/wdac-and-applocker-overview
NEW QUESTION # 64
You have an Azure Active Directory Domain Services (Azure AD DS) domain named aadds.contoso.com.
You have an Azure virtual network named Vnet1. Vnet1 contains two virtual machines named VM1 and VM2 that run Windows Server. VMI and VM2 are joined to aadds.contoso.com.
You create a new Azure virtual network named Vnet2. You add a new server named VM3 to Vnet2.
When you attempt to join VM3 to aadds.contoso.com, you get an error message that the domain cannot be found.
You need to ensure that you can join VM3 toaadds.contoso.com.
Answer:
Explanation:
NEW QUESTION # 65
You need to configure BitLocker on Server4.
On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/storage/refs/refs-overview
https://docs.microsoft.com/en-us/powershell/module/bitlocker/enable-bitlockerautounlock?view=windowsserver2022-ps
NEW QUESTION # 66
You need to create a Hyper-V hyper-converged cluster that stores virtual machines by using Storage Spaces Owed
Which three actions should you perform in sequence? To answer, move the appropriate anions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create a failover cluster.
2 - Enable Storage Spaces Direct.
3 - Create a volume.
NEW QUESTION # 67
You are planning the migration of APP3 and APP4 to support the Azure migration plan.
What should you do on Cluster1 and in Azure before you perform the migration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-hyper-v
NEW QUESTION # 68
You manage 200 physical servers that run Windows Server.
You plan to migrate the servers to Azure.
You need to prepare for discovery of the servers by using Azure Migrate.
Which three actions should you perform in sequence on a physical server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-physical
NEW QUESTION # 69
......
Free Sales Ending Soon - 100% Valid AZ-801 Exam: https://www.free4torrent.com/AZ-801-braindumps-torrent.html
Verified AZ-801 Exam Questions Certain Success: https://drive.google.com/open?id=1Pc7u6tpIJYUTK4dizweXCM5Sz-7dgDOC