[Nov 23, 2021] JN0-1332 Exam Dumps PDF Updated Dump from Free4Torrent Guaranteed Success
Pass Your Juniper Exam with JN0-1332 Exam Dumps
Juniper JN0-1332 Exam Topics:
| Section | Objectives |
|---|---|
| Securing the Service Provider WAN | Describe the security design considerations for a service provider WAN
|
| Security Automation and Management | Describe the design considerations for security management
Describe the design considerations for automating security.
|
| Fundamental Security Concepts | Describe the various tenets of common security features
|
| Securing the Data Center | Describe the security design considerations in a data center
|
| Securing the Enterprise WAN | Describe the security design considerations for an enterprise WAN
|
| High Availability | Describe the design considerations of high availability in a secure network
|
| Securing the Campus and Branch | Describe the security design considerations within a campus or branch network
|
| Security Virtualization | Describe the security design considerations for a virtualized environment
|
| Advanced SecurityConcepts | Describe advanced security features
|
NEW QUESTION 23
What are two factors you must consider when designing a network for security intelligence? (Choose two.)
- A. the number and model of SRX Series devices
- B. the number and model of JSA Series devices
- C. the Junos OS version
- D. the third-party management application
Answer: D
NEW QUESTION 24
Which type of SDN implementation docs Contrail use?
- A. Overlay SDN
- B. open SDN
- C. OpenFlow
- D. SDN using API
Answer: B
NEW QUESTION 25
What are two characteristics of an overlay network design? (Choose two.)
- A. The overlay network contains per-tenant state
- B. The physical network uses tunnels to transfer traffic
- C. The overlay network uses tunnels to transfer traffic.
- D. The physical network contains per-tenant state.
Answer: A
NEW QUESTION 26
As part of your design to secure a service provider WAN. you are asked to design a destination-based remote triggered black hole (RTBH) solution What arc two reasons for using this design? (Choose two)
- A. The attack is focused on a single IP address
- B. The attack comes from a limited number of source IP addresses
- C. You do not know the source address of DDoS packets
- D. You want to ensure that the destination IP remains reachable
Answer: D
NEW QUESTION 27
As part of your service provider WAN network design, you are asked to create a design that secures BGP communication .
In this scenario, what are two reasons you would choose BGP Generated TTL Security Mechanism (GTSM)? (Choose two.)
- A. You have an automated method of rotating MD5 hashes on each router.
- B. AlI of your router BGP connections are point-to-point
- C. You do not have an easy method of rotating MD5 hashes on each router
- D. All of your router BGP connections are point-to-multipoint.
Answer: C,D
NEW QUESTION 28
When considering data center security. which aspect represents the weakest link?
- A. firewall performance
- B. IPS signatures
- C. people
- D. application software bugs
Answer: B
NEW QUESTION 29
Your network design requires that you ensure privacy between WAN endpoints.
Which transport technology requires an IPsec overlay to satisfy this requirement?
- A. internet
- B. L3VPN
- C. L2VPN
- D. leased line
Answer: B
NEW QUESTION 30
Which technology enables IPS inspection for users browsing websites that use Transport Layer Security (TLS)?
- A. defense in-depth
- B. screens
- C. SSL forward proxy
- D. SSL reverse proxy
Answer: C
NEW QUESTION 31
Refer to the exhibit.
The SRX Series devices are decoyed in an off-path active/passive Cluster configuration What are two advantages of this deployment model over an active-'active duster configuration' (Choose two)
- A. load-balancing of north/south traffic
- B. load-balancing of east/west traffic
- C. reduced fabric link traffic
- D. reduced latency
Answer: C,D
NEW QUESTION 32
Exhibit.
In the 3-tier VPN design shown in the exhibit, which function are the Campus A and Campus B SRX Series devices performing?
- A. data center firewall
- B. VPN bridging
- C. Internet security gateway
- D. WAN aggregation
Answer: C
NEW QUESTION 33
As part of a design requirement you are asked to allow users in a specific department to authenticate only on their laptops and no other devices on the same network port. Which mode of 802 .1X authentication will you use to satisfy this requirement?
- A. single-secure
- B. MAC RADIUS
- C. single
- D. multiple
Answer: D
NEW QUESTION 34
You are designing a service provider network. As part of your design you must ensure that the OSPF, BGP, and RSVP protocol communications are secured using the same authentication method. Which authentication protocol will accomplish this task?
- A. simple authentication
- B. HMAC-MD5
- C. SHA-RSA
- D. SHA-256
Answer: A
NEW QUESTION 35
You must secure network access by requiring users to log in through an HTTP browser, while also allowing printers to connect to the network using MAC address validation. What will satisfy these requirements?
- A. 802. IX multiple supplicant
- B. guest VLAN
- C. MAC RADIUS
- D. captive portal
Answer: C
NEW QUESTION 36
You are asked to deploy a product that will provide east-west protection between virtual machines hosted on the same physical server with a requirement to participate with local routing instances. Which product would you use in this scenario?
- A. cSRX
- B. QFX
- C. vSRX
- D. SRX
Answer: C
NEW QUESTION 37
When designing the security for a service provider core router, you are asked to add a firewall fitter on the to0 interface in this scenario, which two protocols would you want to allow through the filter? (Choose two.)
- A. SSH
- B. LLDP
- C. BGP
- D. STP
Answer: B,C
NEW QUESTION 38
You are asked to design an automated vulnerability scanner that can actively check to see which ports are open and report on the findings. Which Junker Networks product would you use in this scenario7
- A. Log Director
- B. Policy Enforcer
- C. JSA
- D. Security Director
Answer: B
NEW QUESTION 39
You are designing a security solution that includes SRX Series firewalls in a chassis cluster.
In this scenario. which two dements must be part of the design? (Choose two.)
- A. The duster ID must be the same on both SRX Series devices
- B. The physical interface on each SRX Series device making up the reth interface must be in separate L2 domains
- C. The physical interface on each SRX Series device making up the reth interface must be in the same L2 domain
- D. The node 10 must be the same on both SRX Series devices
Answer: B
NEW QUESTION 40
You are asked to design security into the configuration of routing protocols on your Junos network to stop rogue neighbors from forming adjacencies for an enterprise WAN What win accomplish this task?
- A. PAP
- B. MOS
- C. TTLS
- D. SAML
Answer: C
NEW QUESTION 41
Which two statements are true about WAN security considerations? (Choose two.)
- A. MACsec increases protection on alt WAN types
- B. internal connections are susceptible to fragmentation
- C. IPsec increases protection on all WAN types
- D. Provider VPN circuit require iPsec
Answer: B
NEW QUESTION 42
Refer to the exhibit.
You arc designing a security solution using an SRX Series chassis duster in two separate buildings In this scenario, what are three considerations? (Choose three )
- A. Both HA Inks must be on physically different switches.
- B. Latency on the fabric path must be under 1000 ms
- C. The switches connecting to interface fab1 must support jumbo frames
- D. Latency on the control path must be under 100 ms
- E. The switches connecting to interface fxp: must support jumbo frames
Answer: C,D,E
NEW QUESTION 43
......
New Real JN0-1332 Exam Dumps Questions: https://www.free4torrent.com/JN0-1332-braindumps-torrent.html