[Oct-2021] DEA-5TT1 Braindumps – DEA-5TT1 Questions to Get Better Grades
DEA-5TT1 Exam Dumps - Try Best DEA-5TT1 Exam Questions - Free4Torrent
The Dell DEA-5TT1 exam directly relates to the certification called Associate – Networking (DCA-Networking) version 1. It signifies the candidate’s basic skills in the networking area as well as the ability to handle different tasks associated with the installation, configuration, maintenance, and troubleshooting networking products for Dell EMC. Thus, the Associate – Networking test DEA-5TT1 looks at network basics, Ethernet networking, switching essentials, the creation of switched networks, and IPv4 as well as v6, among other subjects.
NEW QUESTION 31
Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?
- A. Switch
- B. Transceiver
- C. Port
- D. NIC
Answer: B
NEW QUESTION 32
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?
- A. Network
- B. Transport
- C. Physical
- D. Data Link
Answer: D
NEW QUESTION 33
Which BASE-T Ethernet standard specifies a CAT6 cable type?
- A. 10GBASE-T
- B. 5GBASE-T
- C. 10BASE-T
- D. 2.5GBASE-T
Answer: A
NEW QUESTION 34
If a packet is sent to an IPv6 address and many devices receive the packet, what is this type of traffic?
- A. Multicast
- B. Anycast
- C. Unicast
- D. Broadcast
Answer: A
NEW QUESTION 35
Refer to the exhibit.
Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?
- A. Switch B Gi1/0/1
- B. Switch A Gi1/0/2
- C. Switch A Gi1/0/1
- D. Switch B Gi1/0/2
Answer: C
NEW QUESTION 36
What accurately describes the Network Time Protocol (NTP)?
- A. Time synchronization algorithms do not account for clock drift.
- B. Client makes sudden changes in time to keep synchronized.
- C. Client synchronizes among a set of distributed time servers.
- D. Implemented on a Dell EMC Network OS 6.
Answer: C
NEW QUESTION 37
Which Border Gateway Protocol (BGP) version supports IPv6?
- A. BGPv4
- B. BGPv2
- C. BGPv3
- D. BGPng
Answer: A
NEW QUESTION 38
Which type of domains are connected by a Layer 2 switch?
- A. Multiple collision domains and a single broadcast domain
- B. Multiple broadcast domains and multiple collision domains
- C. Single collision domain and a single broadcast domain
- D. Single collision domain and multiple broadcast domains
Answer: A
NEW QUESTION 39
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients. Which IPv6 address prefix will the default gateway have on a client?
- A. fd01::/64
- B. ff02::/8
- C. fe80::/64
- D. fe08::/64
Answer: C
NEW QUESTION 40
Which flags are used in the TCP header to initiate and end TCP connections or sessions?
- A. Initiate = Finish (FIN)
End = Synchronize (SYN) - B. Initiate = Synchronize (SYN) End = Finish (FIN)
- C. Initiate = Acknowledge (ACK) End = Finish (FIN)
- D. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
Answer: B
NEW QUESTION 41
When configuring a switch, which CLI mode only supports limited show commands?
- A. EXEC
- B. EXEC Privilege
- C. Configuration
- D. Maintenance
Answer: A
Explanation:
Reference:
https://www.dell.com/support/manuals/us/en/04/poweredge-fx2/dell%20fn%20ioa% 20config_9.8.0.0_pub-v1/cli-modes?guid=guid-aeb7d44d-2413-4da8-b8b9-2f8a26bad435&lang=en-us
NEW QUESTION 42
Which criteria is used to define an extended MAC ACL filter?
- A. Destination MAC address and Ethernet frame type
- B. Destination TCP port number and source MAC address
- C. Source and destination MAC addresses
- D. Ethernet frame type and frame size
Answer: C
NEW QUESTION 43
You recently joined a company as a junior-level network administrator. You have been tasked with designing the IPv4 scheme for five networks that will be used for training classrooms. These networks need to support no more than 28 devices each. Due to the existing network design, the senior-level network administrator has asked you to work on network 192.168.40.0/24.
If all networks must be made to logically start with the lowest numbered network and end with the largest numbered network, what is the network ID for the third network?
- A. 192.168.40.96/27
- B. 192.168.40.128/27
- C. 192.168.40.32/27
- D. 192.168.40.64/27
Answer: D
NEW QUESTION 44
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?
- A. N3500 Series switch and N2000 Series switch
- B. N1500 Series switch and N2000 Series switch
- C. N1700 Series switch and N3500 Series switch
- D. N1700 Series switch and N1500 Series switch
Answer: B
Explanation:
Explanation/Reference: https://www.dell.com/en-us/work/shop/povw/networking-os6
NEW QUESTION 45
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?
- A. N3500 Series switch and N2000 Series switch
- B. N1500 Series switch and N2000 Series switch
- C. N1700 Series switch and N3500 Series switch
- D. N1700 Series switch and N1500 Series switch
Answer: B
Explanation:
Reference:
https://www.dell.com/en-us/work/shop/povw/networking-os6
NEW QUESTION 46
What accurately describes OSPF?
- A. Exterior gateway distance-vector protocol
- B. Interior gateway link-state protocol
- C. Interior gateway path-vector protocol
- D. Interior gateway distance-vector protocol
Answer: B
NEW QUESTION 47
What is the default OSPF "hello interval"?
- A. 30 seconds
- B. 10 seconds
- C. 5 seconds
- D. 15 seconds
Answer: B
NEW QUESTION 48
On which OSI layers do standard ACL filters operate?
- A. 2 and 7
- B. 3 and 4
- C. 4 and 7
- D. 2 and 3
Answer: B
Explanation:
Explanation
Explanation/Reference:
NEW QUESTION 49
Which Border Gateway Protocol (BGP) version supports IPv6?
- A. BGPv4
- B. BGPv2
- C. BGPv3
- D. BGPng
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 50
In IPv4, what is the proper conversion from binary to decimal for the number 11010010?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 51
Which Ethernet frame forwarding method works best when the outbound ports run at the same speed as the inbound port?
- A. Store-and-forward
- B. Fragment-free
- C. Unicast
- D. Cut-through
Answer: D
NEW QUESTION 52
......
Dell EMC DEA-5TT1 Exam Syllabus Topics:
| Topic | Details | Weights |
|---|---|---|
| Internet Protocol v4 and v6 | -Identify and describe the differences between private and public IP addressing, and describe classful and CIDR addressing -Describe IPv4 addressing and explain the process of using IPv4 in the network -Describe IPv6 addressing and explain the process of using IPv6 in the network | 14% |
| Switch Stacking, Dell EMC Campus, Datacenter, and Modular Switch Portfolio | - Describe the key concepts of stacking and the hardware required to configure stacking using OS 6, OS 9, and OS 10 - Describe the switch models that are part of the Dell EMC Campus, Datacenter, and Modular Switch portfolio | 10% |
| IP Routing Technologies and Routing Protocols | -Describe basic routing concepts and explain how to interpret a routing table -Identify and describe the differences between static and dynamic routing -Identify and describe the classifications of routing protocols and how they are used to route within and between autonomous systems -Explain the routing process used by RIPv2, OSPF, and BGP (link state and distance vector routing) routing protocols | 15% |
| Dell EMC Switch Software, Configuration, and Management | - Explain how software is used to configure and manage Dell EMC switches, and describe the steps to complete an initial switch configuration | 7% |
| Networks – The Basics | -Explain the purpose and function of network devices such as switches and routers, WANs and LANs, and common Campus and Datacenter topologies -Explain the purpose and basic operations of the OSI model -Describe the concepts and use cases for Layer 2 - Data Link Layer, Discovery protocols | 7% |
| Security, Authentication, and ACLs | -Describe the options and processes of securing access to the network | 3% |
| Transport Layer | -Describe the function of the Transport layers, how it supports host-to-host connectivity, and protocols used by the Transport layers and their use cases | 7% |
| IP and Network Services | -Describe the DHCP and NTP service and explain the configuration steps -Describe Access Control Lists (ACLs) and Network Address Translation | 7% |
| Switching Fundamentals and Creating a Switched Network | -Explain the reason for network switching and the process of moving frames within a switched network -Explain how to differentiate between a broadcast domain and collision domain -Explain how to select cabling and the cables that are certified for network connectivity -Describe the concepts of VLANs, Spanning-Tree protocol, and Link Aggregation and how each functions within the network | 23% |
| Ethernet Networking | -Describe Ethernet networking -Describe the standards of how Ethernet operates and how addressing is used to move data on the Ethernet network | 7% |
Detailed Overview of the Exam Outline
To pass the Dell DEA-5TT1 test successfully, the candidates should gain proficiency in the following topics:
- Switching basics and creation of switched networks;
- Ethernet networking;
- Network basics;
- Technologies for IP routing in addition to routing protocols;
- IPv4 & v6;
- IP as well as network services;
- Switch stacking, EMC campus, Datacenter, as well as modular switch documents.
- Transport layer;
- Security, authentication, in addition to ACLs;
Verified DEA-5TT1 exam dumps Q&As with Correct 62 Questions and Answers: https://www.free4torrent.com/DEA-5TT1-braindumps-torrent.html