Oct-2022 Free HP HPE6-A72 Exam Question Practice Exams
Ace HPE6-A72 Certification with 90 Actual Questions
The benefit in Obtaining the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
This certification is an industry-recognized credential from Aruba Networks that assesses the applicant's understanding of fundamental concepts and skills on Aruba OS and the characteristics that exist on Cloud & Enterprise packages. When it comes to employment, this certification is a career game-changer that will advance you closer to achieving your dream profession.
Some more benefits are:
- Better Salary
- Demonstrate your involvement levels
- Planning for a better future
Exam Topics for Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
The following will be practiced in HP HPE6-A72 practice exam and HP HPE6-A72 practice exams:
- Fundamental Networking by Aruba Solutions
- VLANs
- Fundamentals of the Network
- Secure Administration & Maintenance
- Spanning Tree Protocol
- ArubaOS-CX Management mechanisms
- IP Routing
- Stacking
- TCP/IP Stack
- IP Routing - Section 3
What is the cost of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
- No negative marking for wrong answers
- Lab Required: Yes
- Number of Questions: 30
- Duration of Exam: 3 days
NEW QUESTION 34
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show secondary
- B. show version
- C. show images
- D. show version detail
Answer: C
NEW QUESTION 35
Which statement is true regarding modern switching requirements?
- A. Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.
- B. Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.
- C. While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
- D. Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.
Answer: A
NEW QUESTION 36
What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)
- A. Loopback keepalives
- B. Management interface split detection
- C. Peer switch-based detection
- D. BFD
- E. ARP-based
Answer: B,E
NEW QUESTION 37
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# routing-context Green vrf
- B. Core(config-if-vlan)# ip vpn-instance Green
- C. Core(config-if-vlan)# ip vrf forwarding Green
- D. Core(config-if-vlan)# vrf attach Green
Answer: D
NEW QUESTION 38
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 39
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Using access control lists (ACLs) at the Core to improve performance
- B. Connecting WAN/MPLS and Data center access to the Aggregation layer
- C. Shifting endpoint access to the Aggregation layer from the Access layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION 40
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: A
NEW QUESTION 41
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION 42
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "forgetme!"
- B. "password"
- C. No password is set for this account.
- D. The same login password that has lost originally.
Answer: A
NEW QUESTION 43
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show inventory
- B. show interface physical
- C. show interface transceiver
- D. show interface optics
Answer: C
NEW QUESTION 44
Core(config)# user admin password
Core(config)# interface mgmt
Core(config-if-mgmt)# ip static 10.254.16.89/22
Core(config-if-mgmt)# default-gateway 10.254.19.129
Core(config)# ssh server vrf mgmt
Core(config)# https-server vrf mgmt
You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.
Which two steps are missing? (Choose two.)
- A. Core(config)# https-server rest access-mode read-write
- B. Core(config-if-mgmt)# no shutdown
- C. Core(config)# https-server rest access-mode read-only
- D. Core(config-if-mgmt)# enable
- E. Core(config-if-mgmt)# no tftp-server
Answer: A,B
NEW QUESTION 45
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION 46
Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)
- A. Aruba 8400
- B. Aruba 6405
- C. Aruba 5406R
- D. Aruba 8350
- E. Aruba 2930F
Answer: A,B
NEW QUESTION 47
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION 48
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
- A. copy running-config checkpoint boot-config
- B. copy config config1 config startup-config
- C. copy running-config startup-config
- D. save
- E. write memory
Answer: C,E
NEW QUESTION 49
Which network category applies to a SOHO internal network?
- A. SD-WAN
- B. WAN
- C. LAN
- D. Internet
Answer: D
NEW QUESTION 50
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint rollback 10
- C. checkpoint auto 10
- D. checkpoint auto confirm 10
Answer: C
NEW QUESTION 51
What is the correct description of a Multi-Layer Switch?
- A. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
- B. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- C. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
- D. any switch that supports PoE, LLDP-MED and Flow Control
Answer: A
NEW QUESTION 52
With what other technology does Half Duplex communication closely match?
- A. point-to-point connections between two switches allowing concurrent transmit and receive
- B. a mobile phone call
- C. CB radio using push-to-talk
- D. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
Answer: C
NEW QUESTION 53
Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?
- A. TCP 443
- B. UDP 162
- C. UDP 161
- D. UDP 1812 and UDP 1813
Answer: C
NEW QUESTION 54
Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?
- A. switch(config-if)# no lldp receive
- B. switch(config-if)# no lldp interface (port) transmit
- C. switch(config)# no lldp
- D. switch(config-if)# no lldp transmit
Answer: D
NEW QUESTION 55
......
HPE6-A72 Questions PDF [2022] Use Valid New dump to Clear Exam: https://www.free4torrent.com/HPE6-A72-braindumps-torrent.html
PASS HP HPE6-A72 EXAM WITH UPDATED DUMPS: https://drive.google.com/open?id=18hUQu4j_D4c6g1ol6zCKwfSMRayQnFDK