Pass Exam With Full Sureness - H35-480_V3.0 Dumps with 60 Questions
Verified H35-480_V3.0 dumps Q&As - 100% Pass from Free4Torrent
Huawei H35-480_V3.0 (HCIA-5G-RAN V3.0) certification exam is designed to test the skills and knowledge of professionals who are interested in working with 5G Radio Access Network technologies. HCIA-5G-RAN V3.0 certification is ideal for individuals who are looking to validate their expertise in implementing and maintaining 5G RAN solutions using Huawei technologies. H35-480_V3.0 exam covers a range of topics, including 5G RAN architecture, network planning and optimization, troubleshooting, and more.
To achieve the HCIA-5G-RAN V3.0 certification, candidates must pass the H35-480_V3.0 exam, which consists of 60 questions that candidates must complete within 90 minutes. H35-480_V3.0 exam is designed to evaluate the candidate's knowledge of 5G RAN technologies and their ability to apply this knowledge to design and optimize 5G RAN networks.
NEW QUESTION # 12
Which of the following RF modules support 64T64R?
- A. AAU5313
- B. AAU5613
- C. AAU5619
- D. RRU5901
Answer: B,C
NEW QUESTION # 13
Which of the following channels (signals) can be used for cell measurement in NR?
- A. SSB
- B. CSI-RS
- C. PT-RS
- D. DM-RS
Answer: B,D
Explanation:
1. DM-RS (Demodulation Reference Signals) are transmitted in the frequency domain, they are used to demodulate the downlink data and control channels, and they can be used for cell measurement such as cell identification, cell reselection, and handover. B. CSI-RS (Channel State Information Reference Signals) are also transmitted in the frequency domain, they are used to provide channel state information for downlink data and control channels, and they can be used for cell measurement such as link adaptation, beamforming and interference management.
DM-RS stands for Demodulation Reference Signal and is used for channel estimation in the frequency domain. CSI-RS stands for Channel State Information Reference Signal and is used for channel estimation in the time-frequency domain. PT-RS and SSB are not channels (signals) that can be used for cell measurement in NR.
NEW QUESTION # 14
Which of the following actions are involved in NAS procedure management in 5G? (Choose all that Apply)
- A. Registration management
- B. RRC connection setup
- C. Session management
- D. RRC reestablishment
Answer: A,B,C
Explanation:
NAS (Non-Access Stratum) procedure management in 5G involves three specific actions: registration management, session management, and RRC connection setup. Registration management involves sending and receiving of NAS messages related to the establishment of user-network connections, such as attach and detach procedures. Session management involves sending and receiving of NAS messages related to the management of user session related information, such as security context management. RRC connection setup involves sending and receiving of NAS messages related to the establishment, modification, and release of RRC connections. RRC reestablishment is not involved in NAS procedure management in 5G.
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.02.01_60/ts_138331v150201p.pdf TS 138 331 - V15.2.1 - 5G; NR; Radio Resource Control (RRC ...
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.02.01_60/ts_138331v150201p.pdf
https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1sl/1SL368_0e_5G_NR_UE_RF_conformance_38.521-3.pdf
5g nr fr1 non-standalone ue rf conformance testing
https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1sl/1SL368_0e_5G_NR_UE_RF_conformance_38.521-3.pdf
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.03.00_60/ts_138331v150300p.pdf TS 138 331 - V15.3.0 - 5G; NR; Radio Resource Control (RRC ...
https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.03.00_60/ts_138331v150300p.pdf
NEW QUESTION # 15
Which of the following MML commands is used to bind a physical sector to an AAU on a gNodeB?
- A. ADD SECTOR
- B. ADD NRCELL
- C. ADD NRLOCELL
- D. ADD NRDUCELLCOVERAGE
Answer: C
Explanation:
According to the Huawei SA Networking Product Design Guide (https://www.huawei.com/en/doc/e_huaweidoc/pdf/HW_051525), the MML command used to bind a physical sector to an AAU on a gNodeB is 'ADD NRLOCELL'.
NEW QUESTION # 16
Which of the following files must be prepared when remotely commissioning a gNodeB using the MAE Deployment?
- A. Base station license
- B. Site deployment list
- C. Data configuration file of the base station
- D. Base station software package of the target version
Answer: B,D
NEW QUESTION # 17
In what scenarios is GENEX Assistant typically applied?
- A. Single site verification
- B. Batch processing of gNodeB alarms
- C. Routine network optimization
- D. Wireless network adjustment
Answer: B
NEW QUESTION # 18
In NSA networking, which of the following modes is used to anchor 5G NR?
- A. WCDMA
- B. OGSM
- C. CDMA
- D. LTE
Answer: D
Explanation:
Explanation
The non-standalone (NSA) mode of 5G NR refers to an option of 5G NR deployment that depends on the control plane of an existing 4G LTE network for control functions, while 5G NR is exclusively focused on the user plane.[7][8] This is reported to speed up 5G adoption, however some operators and vendors have criticized prioritizing the introduction of 5G NR NSA on the grounds that it could hinder the implementation of the standalone mode of the network
NEW QUESTION # 19
In SA networking, the mobile country code (MCC) and mobile network code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network.
- A. True
- B. False
Answer: A
Explanation:
"The Mobile Country Code (MCC) and Mobile Network Code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network."
NEW QUESTION # 20
Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs?
- A. TA
- B. MACCE
- C. RSRP
- D. PCI
Answer: C,D
NEW QUESTION # 21
Which of the following NR slot configurations are defined in 3GPP specifications? (Choose All that Apply)
- A. Mixed slot, which contains at least one downlink/uplink symbol while other symbols can be flexibly configured
- B. Downlink-only slot (all symbols are dedicated for downlink)
- C. Uplink-only slot (all symbols are dedicated for uplink)
- D. Flexible-slot (all symbols are flexibly configured)
Answer: A,B,C,D
Explanation:
1. Mixed slot is a slot configuration in which at least one downlink/uplink symbol is present, while other symbols can be flexibly configured for downlink or uplink transmission. This allows for a more efficient use of resources and better support for different types of services. B. Flexible-slot is a slot configuration in which all symbols are flexibly configured for downlink or uplink transmission. This allows for a more efficient use of resources and better support for different types of services. C. Downlink-only slot is a slot configuration in which all symbols are dedicated for downlink transmission, This configuration is mainly used for downlink-centric services such as video streaming or software downloads. D. Uplink-only slot is a slot configuration in which all symbols are dedicated for uplink transmission, this configuration is mainly used for uplink-centric services such as voice calls or video conferencing.
NEW QUESTION # 22
On an NSA network, the eNodeB immediately triggers the SgNB addition procedure after a UE attaches to the LTE network. If the SgNB addition fails, the eNodeB attempts to add the SgNB again until it is successful.
- A. True
- B. False
Answer: A
Explanation:
On an NSA network, the eNodeB immediately triggers the SgNB addition procedure after a UE attaches to the LTE network. If the SgNB addition fails, the eNodeB attempts to add the SgNB again until it is successful. The eNodeB may also trigger an SgNB addition procedure if it detects a change in its coverage area or if it detects a new SgNB or an SgNB that has been moved.
NEW QUESTION # 23
SSB GSCN is the center frequency number of an NR cell.
- A. True
- B. False
Answer: A
Explanation:
SSB GSCN is the center frequency number of an NR cell. SSB GSCN stands for "SS block group-specific cell number" and is used to identify the center frequency of an NR cell. This value is used in combination with the operating bandwidth of the cell to determine the physical layer resource grid for the cell. As such, it is important for the correct SSB GSCN to be configured for the cell in order to ensure the correct channel coding.
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/powerpoint_presentation_-_making_5g_nr_a_reality_february_2020_web.pdf Making 5G NR a Commercial Reality A unified, more capable 5G air ...
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/powerpoint_presentation_-_making_5g_nr_a_reality_february_2020_web.pdf
https://www.gtigroup.org/d/file/Resources/rep/2019-07-05/cbf7810256b4c312c460863fcb77bd58.pdf GTI 5G Device Power Consumption White Paper
https://www.gtigroup.org/d/file/Resources/rep/2019-07-05/cbf7810256b4c312c460863fcb77bd58.pdf In 5G NR, the SSB (Secondary Synchronization Signal Block) is used to provide the time and frequency synchronization information to the mobile devices. It is transmitted in the frequency domain and it consists of two parts: the SSB GSCN (Secondary Synchronization Signal Block - Group and Sequence Number) and the SSB MIB (Secondary Synchronization Signal Block - Master Information Block).
The SSB GSCN is a unique identifier that indicates the center frequency number of the cell. It is used to identify the cell and to determine the frequency offset of the cell with respect to the carrier frequency.
So, the statement is true, SSB GSCN is the center frequency number of an NR cell. It's worth noting that the SSB MIB contains other system information such as the system bandwidth, the transmission bandwidth configuration, and the number of symbols in a slot.
NEW QUESTION # 24
E2E network device update is required for the evolution from 5G NSA networking to SA networking.
- A. True
- B. False
Answer: A
Explanation:
End-to-end (E2E) network device update is required for the evolution from 5G Non-Stand-Alone (NSA) networking to Stand-Alone (SA) networking. In 5G NSA networking, the control plane functions are handled by the 4G LTE network, while the user plane functions are handled by the 5G NR network. In contrast, in 5G SA networking, the control plane and user plane functions are handled by the 5G NR network alone. So, to evolve from 5G NSA to 5G SA, all the network devices including Radio Access Network (RAN), Core Network (CN) and Transport Network (TN) need to be updated with 5G SA capable software and hardware.
It is important to note that 5G SA provides more flexibility, control and autonomy for network operation and management, However, it also requires a higher level of complexity and more resources to operate.
NEW QUESTION # 25
When you add tracking area information on a gNodeB, an operator ID is bound.
- A. True
- B. False
Answer: A
NEW QUESTION # 26
Which of the following messages is the first message sent by a gNodeB to an AMF?
- A. NGAP_INIT_CONTEXT_SETUP_RSP
- B. NGAP_UL_NAS_TRANSP
- C. NGAP_INIT_UE_MSG
- D. RRC_SETUP
Answer: A
NEW QUESTION # 27
......
H35-480_V3.0 Dumps Full Questions - Exam Study Guide: https://www.free4torrent.com/H35-480_V3.0-braindumps-torrent.html
Pass H35-480_V3.0 Exam in First Attempt Guaranteed 2024 Dumps: https://drive.google.com/open?id=1wz8JEYoxpTqpM5pPhrfZbuIWD2dPz65V