Pass NS0-303 Brain Dump Updated Certification Sample Questions
Online NS0-303 Test Brain Dump Question and Test Engine
The NS0-303 certification is one of the most sought-after certifications in the IT industry. NetApp Certified Hybrid Cloud - Administrator certification validates a candidate's ability to design, deploy, and manage NetApp hybrid cloud solutions effectively. Employers prefer candidates with this certification as it demonstrates that they have the skills and knowledge required to work with NetApp hybrid cloud solutions. Passing the NS0-303 exam can open up new career opportunities for IT professionals and help them advance in their careers.
Network Appliance NS0-303 (NetApp Certified Hybrid Cloud - Administrator) certification exam is designed for IT professionals who want to validate their skills in administering and managing hybrid cloud environments using NetApp technologies. NetApp Certified Hybrid Cloud - Administrator certification is ideal for those who have experience in implementing and managing data storage solutions, data protection, and disaster recovery solutions in hybrid cloud environments. The NS0-303 certification exam covers topics such as NetApp data storage solutions, data protection, application integration, hybrid cloud management, and disaster recovery.
NEW QUESTION # 56
You have an NFS export in Cloud Volumes Service, but have an application requirement for block access and SCSI-2 reservations. You need to migrate the data to a new iSCSI LUN presented to a Linux server from Cloud Volumes ONTAP. The Linux server is also running an NFS server. In this scenario, which tool would you use to perform this task?
- A. SnapMirror
- B. CloudMirror
- C. Cloud Sync
- D. Robocopy
Answer: C
NEW QUESTION # 57
You have designed and written applications as containers and want to deploy them on a Kubernetes cluster. You want to use Cloud Volumes ONTAP to provide dynamic persistent storage for your Kubernetes cluster.
In this scenario, what will automate this task?
- A. Trident
- B. Istio
- C. kubectl
- D. Terraform
Answer: A
NEW QUESTION # 58
Which two network topologies would support SnapMirror data replication from Cloud Volumes ONTAP for Azure to Cloud Volumes ONTAP for AWS? (Choose two.)
- A. Virtual Private Cloud -> AWS Transit Gateway
- B. cloud provider -> cloud provider VPN
- C. cloud provider -> on-premises -> cloud provider VPN
- D. Virtual Private Cloud (VPC) -> Azure Virtual Network (VNET) peering
Answer: B,C
NEW QUESTION # 59
What are three valid URL paths for accessing an S3 bucket in Storage GRID? (Choose three.)
- A. http://domainname/bucket-name
- B. http://hostname.domainname/bucket-name
- C. http://butketname.gateway.domainname
- D. http://bocketname.storagenode.domainnanic
- E. http://www.netapp.com/budcet-name
Answer: C,D,E
NEW QUESTION # 60
Click the Exhibit button.
You are provisioning Cloud Volumes ONTAP In AWS with OnCommand Cloud Manager.
Referring to the exhibit, which technology Is encrypting the data at rest?
- A. NSE
- B. NVE
- C. KMS
- D. AES-NI
Answer: C
NEW QUESTION # 61
You are the administrator for your IT organization's cloud infrastructure. You need to deploy Cloud Volumes ONTAP to your AWS infrastructure.
In this situation, what is the first tool you need, to deploy Cloud Volumes ONTAP?
- A. OnCommand Insight
- B. OnCommand Unified Manager
- C. OnCommand System Manager
- D. OnCommand Cloud Manager
Answer: D
NEW QUESTION # 62
Which two advanced SMB features are available with Cloud Volumes ONTAP 9.5? (Choose two.)
- A. large MTU
- B. credit limits
- C. multichannel
- D. workgroup authentication
Answer: A,C
NEW QUESTION # 63
When you export an NFS share to an AWS EC2 instance using OnCommand Cloud Manager, which two steps in the process would it automate? (Choose two.)
- A. creating the LUN In the volume
- B. mapping the LUN to the appropriate igroup
- C. creating the volume
- D. exporting the volume/share to the EC2 Instance
Answer: D
NEW QUESTION # 64
Which two protocols does a Cloud Volumes Service dual-protocol share support? (Choose two.)
- A. SMB
- B. NFS
- C. FC
- D. iSCSI
Answer: A,B
NEW QUESTION # 65
You have an AFF A800 and are tiering data into StorageGRID. You need to keep a second copy of the cold data in an S3 bucket within AWS.
In this scenario, which two NetApp technologies would you use? (Choose two.)
- A. Cloud Sync
- B. FlashPool
- C. SnapMirror
- D. CloudMirror
Answer: C,D
NEW QUESTION # 66
As a Cloud Volumes administrator for AWS, which three steps should you complete before launching OnCommand Cloud Manager in AWS? (Choose three.)
- A. Grant access to AWS CMK.
- B. Subscribe to Cloud Volumes ONTAP in AWS.
- C. Create a Direct Connect.
- D. Grant AWS permissions.
- E. Verify your AWS networking.
Answer: A,B,C
NEW QUESTION # 67
As the administrator of Cloud Insights, you installed the Acquisition Unit and configured the ONTAP Data Collector. You successfully added an ONTAP 9.5 system for monitoring.
When you add another FAS system, you receive the error message shown below.
Error: "7 Mode filers are not supported"
In this situation, which statement Is correct?
- A. You must configure the Data Collector for Data ONTAP 7-Mode.
- B. ONTAP Systems running In 7-Mode are not supported by Cloud Insights.
- C. The communication between the Acquisition Unit and the ONTAP system gets blocked.
- D. You must use the correct admin level username and password.
Answer: A
NEW QUESTION # 68
Click the Exhibit button.
You have deployed Cloud Volumes ONTAP for AWS. During the deployment, you use an existing security group as shown in the exhibit. You are not able to connect NFS or SMB clients to the Cloud Volumes ONTAP Instance.
In this scenario, which two changes must be made to the security group to solve this problem? (Choose two.)
- A. Change the source addresses to allow the 0.0.0.0/0 address.
- B. Change to a new security group with access controls according to the documentation.
- C. Change the allowed ports to allow SMB and NFS outbound.
- D. Change the allowed ports to allow SMB and NFS Inbound.
Answer: A,B
NEW QUESTION # 69
You are the administrator of a company's public cloud infrastructure and cloud connected storage system. You provision Windows Server 2019 Azure VMs. You want to configure your cluster to use a traditional Windows cluster and support "Cluster Shared Volumes".
To provision this service, you need to set up the NetApp storage to use which connection protocol?
- A. iSCSI connectivity to block-based storage
- B. Fiber Channel (FC) connectivity to block-based storage
- C. NFS export to a NAS share
- D. NVMe connectivity over fabric to block-based storage
Answer: A
NEW QUESTION # 70
Click the Exhibit button.
Referring to the exhibit, which compute server instance is able to natively modify file permissions in the "media-plex" share?
- A. Red Hat Enterprise Linux
- B. Microsoft Windows Server
- C. SUSE Linux Enterprise Server
- D. Ubuntu Server
Answer: B
NEW QUESTION # 71
An ONTAP administrator wants to use OnCommand System Manager to view the Cloud Volumes ONTAP cluster to administer protocol access to certain volumes.
Referring to the exhibit, which URL is used to access OnCommand System Manager?
- A. https://10.20.1.6
- B. https://10.20.1.5
- C. https://10.20.1.3
- D. https://10.20.1.4
Answer: B
NEW QUESTION # 72
Your OnCommand Cloud Manager instance has database corruption. You create a new OnCommand Cloud Manager Instance with no data, and your ON1AP instances are still running with no issues. You want to bring the cloud and on-premises ONTAP instances into the new OnCommand Cloud Manager working environment.
In this scenario, which two actions will satisfy these requirements? (Choose two.)
- A. Discover the ONTAP instances.
- B. Promote a load sharing mirror.
- C. Import ActiveIQ entitlements.
- D. Restore the 7zfile.
Answer: A,D
NEW QUESTION # 73
......
Real Network Appliance NS0-303 Exam Dumps with Correct 140 Questions and Answers: https://www.free4torrent.com/NS0-303-braindumps-torrent.html
Network Appliance NS0-303 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=16dqu5OE9Ai0Gmqzws5zlTl7YN0QsmZ_q