Pass Your Fortinet Exam with NSE6_FNC-8.5 Exam Dumps (Updated 30 Questions) [Q17-Q34]

Share

Pass Your Fortinet Exam with NSE6_FNC-8.5 Exam Dumps (Updated 30 Questions)

NSE6_FNC-8.5 Exam Dumps - Fortinet Practice Test Questions


Aruba Networks Certified: Mobility Associate-Professional Exam Certified Professional salary

The estimated average salary of Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam is listed below:

  • England: 71,460 POUND
  • United States: 100,146 USD
  • India: 7,199,4 INR
  • Europe: 88,032 EURO

These salaries are calculated at the time of writing according to the currency rates.


How to schedule Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam

To apply for the Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam, You have to follow these steps:

  • Step 1: Go to the Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Official Site. You must first create an account at the NSE Institute. You must use your company email address to register. You must purchase your training through your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
  • Step 2: Read the instruction Carefully
  • Step 3: Follow the given steps
  • Step 4: Apply for the Network Security Specialist Fortinet NSE6_FNC-8.5-Professional Exam

Exam Topics for Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam

The following will be practiced in FORTINET NSE6_FNC-8.5 practice exam and FORTINET NSE6_FNC-8.5 practice exams:

  • FortiADC
  • FortiAuthenticator
  • FortiWLC
  • FortiVoice
  • Integrated and Cloud Wireless
  • FortiWeb
  • FortiMail
  • FortiNAC

 

NEW QUESTION 17
How are logical networks assigned to endpoints?

  • A. Through FortiGate IPv4 policies
  • B. Through Layer 3 polling configurations
  • C. Through device profiling rules
  • D. Through network access policies

Answer: A

Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/9819/viewing-and-controlling- network-risks-via-topology-view

 

NEW QUESTION 18
Which agent is used only as part of a login script?

  • A. Passive
  • B. Dissolvable
  • C. Persistent
  • D. Mobile

Answer: C

Explanation:
If the logon script runs the logon application in persistent mode, configure your Active Directory server not to run scripts synchronously.
Reference: https://www.websense.com/content/support/library/deployctr/v76/ init_setup_creating_and_running_logon_agent_script_deployment_tasks.aspx

 

NEW QUESTION 19
Refer to the exhibit.

If you are forcing the registration of unknown (rogue) hosts, and an unknown (rogue) host connects to a port on the switch, what will occur?

  • A. The host is disabled.
  • B. The host is moved to a default isolation VLAN.
  • C. The host is moved to VLAN 111.
  • D. No VLAN change is performed

Answer: A

Explanation:
Explanation
The ability to limit the number of workstations that can connect to specific ports on the switch is managed with Port Security. If these limits are breached, or access from unknown workstations is attempted, the port can do any or all of the following: drop the untrusted data, notify the network administrator, or disable the port.

 

NEW QUESTION 20
Which two methods can be used to gather a list of installed applications and application details from a host?
(Choose two)

  • A. MDM integration
  • B. Application layer traffic inspection
  • C. Portal page on-boarding options
  • D. Agent technology

Answer: B,C

 

NEW QUESTION 21
Where do you look to determine when and why the FortiNAC made an automated network access change?

  • A. The Event view
  • B. The Admin Auditing view
  • C. The Connections view
  • D. The Port Changes view

Answer: A

 

NEW QUESTION 22
What capability do logical networks provide?

  • A. Application of different access values from a single access policy
  • B. VLAN-based inventory reporting
  • C. Autopopulation of device groups based on point of connection
  • D. Interactive topology view diagrams

Answer: B

Explanation:
NTM also includes reporting utilities such as network and inventory reports. You can generate reports for subnets, switch ports, and VLANs.
Reference: https://logicalread.com/network-diagram/#.YBk9ZOgzbIU

 

NEW QUESTION 23
What would occur if both an unknown (rogue) device and a known (trusted) device simultaneously appeared on a port that is a member of the Forced Registration port group?

  • A. The port would be provisioned to the registration network, and both hosts would be isolated.
  • B. The port would not be managed, and an event would be generated.
  • C. The port would be provisioned for the normal state host, and both hosts would have access to that VLAN.
  • D. The port would be administratively shut down.

Answer: C

 

NEW QUESTION 24
What causes a host's state to change to "at risk"?

  • A. The host has been administratively disabled.
  • B. The host is not in the Registered Hosts group.
  • C. The host has failed an endpoint compliance policy or admin scan.
  • D. The logged on user is not found in the Active Directory.

Answer: C

Explanation:
Failure - Indicates that the host has failed the scan. This option can also be set manually. When the status is set to Failure the host is marked "At Risk" for the selected scan.
Reference: https://docs.fortinet.com/document/fortinac/8.3.0/administration-guide/241168/host-health-and- scanning

 

NEW QUESTION 25
During the on-boarding process through the captive portal, why would a host that successfully registered remain stuck in the Registration VLAN? (Choose two.)

  • A. The wrong agent is installed.
  • B. There is another unregistered host on the same port.
  • C. Bridging is enabled on the host.
  • D. The ports default VLAN is the same as the Registration VLAN.

Answer: A,D

Explanation:
Scenario 4: NAT detection disabled, using endpoint compliance policy and agent.
Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/868f1267-7299-11e9-
81a4-00505692583a/fortinac-admin-operation-85.pdf

 

NEW QUESTION 26
What agent is required in order to detect an added USB drive?

  • A. Passive
  • B. Dissolvable
  • C. Persistent
  • D. Mobile

Answer: C

 

NEW QUESTION 27
Where are logical network values defined?

  • A. In the model configuration view of each infrastructure device
  • B. In the port properties view of each port
  • C. In the security and access field of each host record
  • D. On the profiled devices view

Answer: D

 

NEW QUESTION 28
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?

  • A. Only rogue hosts would be impacted.
  • B. Both enforcement groups cannot contain the same port.
  • C. Both types of enforcement would be applied.
  • D. Only al-risk hosts would be impacted.

Answer: A

 

NEW QUESTION 29
Which two of the following are required for endpoint compliance monitors? (Choose two.)

  • A. Logged on user
  • B. Custom scan
  • C. Security rule
  • D. Persistent agent

Answer: B,D

Explanation:
DirectDefense's analysis of FireEye Endpoint attests that the products help meet the HIPAA Security Rule.
In the menu on the left click the + sign next to Endpoint Compliance to open it.
Reference:
https://docs.fortinet.com/document/fortinac/8.5.2/administration-guide/92047/add-or-modify-a-scan

 

NEW QUESTION 30
Which three circumstances trigger Layer 2 polling of infrastructure devices? (Choose three.)

  • A. A failed Layer 3 poll
  • B. Linkup and Linkdown traps
  • C. Manual polling
  • D. A matched security policy
  • E. Scheduled poll timings

Answer: B,C,E

 

NEW QUESTION 31
Which three of the following are components of a security rule? (Choose three.)

  • A. Methods
  • B. Security String
  • C. User or host profile
  • D. Action
  • E. Trigger

Answer: C,D,E

 

NEW QUESTION 32
What capability do logical networks provide?

  • A. Application of different access values from a single access policy
  • B. VLAN-based inventory reporting
  • C. Autopopulation of device groups based on point of connection
  • D. Interactive topology view diagrams

Answer: A

 

NEW QUESTION 33
Which agent is used only as part of a login script?

  • A. Dissolvable
  • B. Persistent
  • C. Mobile
  • D. Passive

Answer: D

Explanation:
If the logon script runs the logon application in persistent mode, configure your Active Directory server not to run scripts synchronously.

 

NEW QUESTION 34
......

New Real NSE6_FNC-8.5 Exam Dumps Questions: https://drive.google.com/open?id=1f7Y_7NlqGxLFxV8eM06PS81KGMSD--JZ

Pass Your NSE6_FNC-8.5 Exam Easily with Accurate PDF Questions: https://www.free4torrent.com/NSE6_FNC-8.5-braindumps-torrent.html