Pass VMCE_V10 Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Oct-2021]
Valid VMCE_V10 test answers & Veeam VMCE_V10 exam pdf
NEW QUESTION 13
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a backup copy job in mirror mode, to a repository on the second site
- B. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
Answer: B
NEW QUESTION 14
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Snapshot deletion
- B. Snapshot creation
- C. High CPU usage
- D. Storage snapshot deletion
- E. Storage snapshot creation
- F. Veeam backup activity
Answer: A,B,F
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
NEW QUESTION 15
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Re-add all Veeam components involved in data transfer through the required interfaces
- B. Update routing tables on the components involved in data transfer
- C. Create a global network traffic rule, set appropriate source and target IP range
- D. Use the preferred network settings to switch to data network for the backup traffic
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100
NEW QUESTION 16
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Aggregated data every five minutes
- B. Data does not exist
- C. Aggregated data every two hours
- D. Raw data every 20 seconds
Answer: C
NEW QUESTION 17
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Indexing must be enabled for the original VM
- B. Perform failback to VM within the same subnet
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. The VM replica must have access to the repository where the full backup of the VM resides
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 18
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m.
and the administrator fails over the
replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 7 a.m. to 8 a.m.
- B. Data from 1 a.m. to 2 p.m.
- C. Data from 8 a.m. to 2 p.m.
- D. Data from 1 a.m. to 7 a.m.
Answer: B
NEW QUESTION 19
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?
- A. The storage is not added into the storage infrastructure, inside the backup and replication console
- B. The datastores are properly zoned and exposed to the proxy server but in read-only mode
- C. One or more of the VM disk(s) are on Wols
- D. Write access has not been enabled on the SAN
- E. The disks being processed are IDE and/or SATA
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/direct_san_access.html?ver=100
NEW QUESTION 20
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup? (Choose three.)
- A. Virtual lab
- B. Backup proxy
- C. Replication job
- D. Application group
- E. SureBackup job
- F. Gateway Server
Answer: A,C,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/recovery_verification_overview.html?v er=100
NEW QUESTION 21
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. Optimized for typical deployment
- B. Optimized for advanced scalability deployment
- C. For backup data only
- D. For vCenter data only
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 22
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- B. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. If a VM within the replication job is not mapped, the job will fail
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 23
Which storage optimization option uses a block size of 512 KB?
- A. LAN target
- B. Local target
- C. Local target (large blocks)
- D. WAN target
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/compression_deduplication.html?ver=1
00
NEW QUESTION 24
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- B. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
- C. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- D. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
Answer: D
Explanation:
Explanation: Section: (none)
NEW QUESTION 25
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?
- A. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2
- B. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
- C. Use the Veeam Explorer for Active Directory to recover the domain controller
- D. Perform a bare metal recovery of their domain controller back to the original system
Answer: B
Explanation:
Reference: https://www.veeam.com/blog/how-to-recover-a-domain-controller-best- practices-for-ad- protection.html
NEW QUESTION 26
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. Per VM backup files are enabled in the repository
- B. You should configure the synthetic full backup to be performed on Mondays instead
- C. The other restore points are weekly full backups, this is expected
- D. The old restore points will be deleted after the new restore chain meets the retention policy
Answer: C
Explanation:
Reference: https://www.veeam.com/kb1990
NEW QUESTION 27
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
- A. Add the file share into the managed servers
- B. Add the file share into the store infrastructure
- C. Add the file share into the physical infrastructure
- D. Add the file share into the inventory
Answer: A
NEW QUESTION 28
......
VMCE_V10 Exam Questions – Valid VMCE_V10 Dumps Pdf: https://www.free4torrent.com/VMCE_V10-braindumps-torrent.html