NSE6_FWF-6.4 Actual Questions - Instant Download Tests Free Updated Today!
Get instant access of 100% real Fortinet NSE6_FWF-6.4 exam questions with verified answers
Fortinet NSE6_FWF-6.4 Certification Exam is a challenging exam that requires a thorough understanding of wireless network security concepts and Fortinet products. NSE6_FWF-6.4 exam consists of multiple-choice questions and simulations that test the candidate's ability to deploy, configure, and manage wireless networks using Fortinet solutions. Candidates must pass the exam with a score of at least 70% to earn the certification. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification is valid for two years, after which the candidate must renew their certification by passing a recertification exam or completing continuing education credits.
NEW QUESTION # 18
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Installation phase
- C. Hardware selection phase
- D. Site survey phase
Answer: B,D
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION # 19
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Install another AP in the reception area to improve available bandwidth
- C. Enable frequency handoff on the AP to band steer clients
- D. Increase the transmission power of the AP radios
Answer: C
NEW QUESTION # 20
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength weaker than -68 dB are cut out of the map
- C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- D. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
Answer: D
NEW QUESTION # 21
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
Answer: C,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION # 22
A tunnel mode SSID is configured on a FortiGate wireless controller.
Which task must be completed before the SSID can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. The wireless network to Internet firewall policy must be configured.
- C. The wireless network interface must be assigned a Layer 3 address.
- D. Security Fabric and HTTPS must be enabled on the wireless network interface.
Answer: C
Explanation:
Explanation
The wireless network interface must be assigned a Layer 3 address because it acts as the gateway for the tunnel mode SSID traffic. The FortiGate wireless controller uses this interface to communicate with the FortiAPs and the wireless clients. Without a valid IP address, the tunnel mode SSID cannot function properly.
References: Secure Wireless LAN Course Description, page 5; [FortiOS 6.4.0 Handbook - Wireless Controller], page 24.
NEW QUESTION # 23
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Increase the transmission power of the AP radio interfaces
- B. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- C. For both interfaces in the wtp-profile, configure vap-all to be manual
- D. Disable intra-vap-privacy for the Authors vap-wireless network
Answer: B,C
NEW QUESTION # 24
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Project information phase
- C. Hardware selection phase
- D. Site survey phase
Answer: B,D
NEW QUESTION # 25
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: A
NEW QUESTION # 26
What type of design model does FortiPlanner use in wireless design project?
- A. Architectural model
- B. Integration model
- C. Predictive model
- D. Analytical model
Answer: A
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION # 27
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Configure the controller for the correct country code for Germany
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
Answer: C
NEW QUESTION # 28
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the controller for the correct country code for Germany
- B. Clone a suitable FortiAP profile and change the county code settings on the profile
- C. Create a new FortiAP profile and change the county code settings on the profile
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
Answer: C
Explanation:
Explanation
The correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs is to create a new FortiAP profile and change the country code settings on the profile. This is because the country code settings determine the legal RF channels and transmission power limits for each country, and they are applied at the FortiAP profile level. By creating a new FortiAP profile for the remote APs, you can specify the correct country code for Germany and assign it to the APs. This will ensure that the APs comply with the local regulations and avoid interference with other devices. Configuring the APs individually by overriding the settings in Managed FortiAPs is not recommended, as it is tedious and error-prone. Configuring the controller for the correct country code for Germany is not possible, as the controller can only have one country code setting, which should match its physical location. Cloning a suitable FortiAP profile and changing the county code settings on the profile is not advisable, as it may cause conflicts with other settings that are specific to the original profile. References: Secure Wireless LAN course description, [FortiOS 6.4.0 Handbook - Wireless Controller]
NEW QUESTION # 29
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Ensure that all allowed channels are enabled for the AP radios.
- B. Enable Locate WiFi clients when not connected in the relevant AP profiles.
- C. Enable Monitor channel utilization on the relevant AP profiles.
- D. Enable Radio resource provisioning on the relevant AP profiles.
Answer: D
Explanation:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION # 30
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 Enterprise wireless network
- B. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- C. An X.509 certificate to authenticate the client
- D. An X.509 to authenticate the authentication server
- E. A WPA2 or WPA3 personal wireless network
Answer: C,D
NEW QUESTION # 31
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiAP Cloud
- B. FortiGate
- C. AP Manager
- D. FortiSwitch
Answer: A,B
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 32
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured for captive portal authentication
- C. A VAP configured to authenticate using a radius server
- D. A VAP configured to authenticate locally on FortiGate
Answer: A,C
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 33
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. FortLink channels
- B. Security channels
- C. Data channels
- D. Control channels
Answer: C,D
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION # 34
......
Download Latest & Valid Questions For Fortinet NSE6_FWF-6.4 exam: https://www.free4torrent.com/NSE6_FWF-6.4-braindumps-torrent.html
Exam Dumps for the Preparation of Latest NSE6_FWF-6.4 Exam Questions: https://drive.google.com/open?id=1uymdm5oIM5AehtPFZlK0xKIhV2Yvn0eJ