Full FCP_FCT_AD-7.2 Practice Test and 57 Unique Questions, Get it Now!
The Best FCP_FCT_AD-7.2 Exam Study Material Premium Files and Preparation Tool
Fortinet FCP_FCT_AD-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 23
Which three features does FortiClient endpoint security include? (Choose three.)
- A. Vulnerability management
- B. DLP
- C. lPsec
- D. Real-lime protection
- E. L2TP
Answer: A,C,D
Explanation:
Understanding FortiClient Features:
FortiClient endpoint security includes several features aimed at protecting and managing endpoints.
Evaluating Feature Set:
Vulnerability management is a key feature of FortiClient, helping to identify and address vulnerabilities (B).
IPsec is supported for secure VPN connections (D).
Real-time protection is crucial for detecting and preventing threats in real-time (E).
Eliminating Incorrect Options:
Data Loss Prevention (DLP) (A) is typically managed by FortiGate or FortiMail.
L2TP (C) is a protocol used for VPNs but is not specifically a feature of FortiClient endpoint security.
Reference:
FortiClient endpoint security features documentation from the study guides.
NEW QUESTION # 24
Exhibit.
Based on the logs shown in the exhibit, why did FortiClient EMS tail to install FortiClient on the endpoint?
- A. The FortiClient antivirus service is not running.
- B. The remote registry service is not running.
- C. The task scheduler service is not running.
- D. The Windows installer service is not running.
Answer: C
Explanation:
https://community.fortinet.com/t5/FortiClient/Technical-Note-FortiClient-fails-to-install-from-FortiClient-EMS/ta-p/193680 The deployment service error message may be caused by any of the following. Try eliminating them all, one at a time.
1. Wrong username or password in the EMS profile
2. Endpoint is unreachable over the network
3. Task Scheduler service is not running
4. Remote Registry service is not running
5. Windows firewall is blocking connection
NEW QUESTION # 25
An administrator wants to simplify remote accesswithout asking users to provideuser credentials Which access control method provides this solution?
- A. ZTNA full mode
- B. ZTNA IP/MAC littering mode
- C. SSL VPN
- D. L2TP
Answer: A
Explanation:
* Simplifying Remote Access:
* The administrator wants to simplify remote access without asking users to provide user credentials.
* Evaluating Access Control Methods:
* ZTNA full mode can provide seamless access by leveraging device identity and posture, eliminating the need for user credentials for each access request.
* Other methods like SSL VPN and L2TP typically require user credentials.
* Conclusion:
* The correct access control method that provides this solution is ZTNA full mode.
References:
* ZTNA section in the FortiGate Infrastructure 7.2 Study Guide.
NEW QUESTION # 26
Which security fabric component sends a notification io quarantine an endpoint after IOC detection "n the automation process?
- A. FortiGate
- B. FortiAnalyzer
- C. FortiClient EMS
- D. FortiClient
Answer: C
Explanation:
* Understanding the Automation Process:
* In the Security Fabric, automation processes can include actions such as quarantining an endpoint after an IOC (Indicator of Compromise) detection.
* Evaluating Responsibilities:
* FortiClient EMS plays a crucial role in endpoint management and can send notifications to quarantine endpoints.
* Conclusion:
* The correct security fabric component that sends a notification to quarantine an endpoint after IOC detection is FortiClient EMS.
References:
* FortiClient EMS and automation process documentation from the study guides.
NEW QUESTION # 27
Which three features does FortiClient endpoint security include? (Choose three.)
- A. Vulnerability management
- B. DLP
- C. lPsec
- D. Real-lime protection
- E. L2TP
Answer: A,C,D
Explanation:
* Understanding FortiClient Features:
* FortiClient endpoint security includes several features aimed at protecting and managing endpoints.
* Evaluating Feature Set:
* Vulnerability management is a key feature of FortiClient, helping to identify and address vulnerabilities (B).
* IPsec is supported for secure VPN connections (D).
* Real-time protection is crucial for detecting and preventing threats in real-time (E).
* Eliminating Incorrect Options:
* Data Loss Prevention (DLP) (A) is typically managed by FortiGate or FortiMail.
* L2TP (C) is a protocol used for VPNs but is not specifically a feature of FortiClient endpoint security.
References:
* FortiClient endpoint security features documentation from the study guides.
NEW QUESTION # 28
Refer to the exhibit.
Based on the FortiClient tog details shown in the exhibit, which two statements ace true? (Choose two.)
- A. The filename is sent to FortiSandbox for further inspection.
- B. The file location is \??\D:\Users\.
- C. The filename Is Unconfirmed 899290.crdovnload.
- D. The file status is Quarantined
Answer: C,D
NEW QUESTION # 29
FortiClient EMS endpoint policies
Refer to the exhibit, which shows multiple endpoint policies on FortiClient EMS. Which policy is applied to the endpoint in the AD group trainingAD
- A. The sales policy
- B. The Default policy because it has the highest priority
- C. The Training policy
- D. Both the Sales and Training policies because their priority is higher than the Default policy
Answer: C
Explanation:
* Observation of Endpoint Policies:
* The exhibit shows multiple endpoint policies with their assigned groups, priority levels, and enabled status.
* Evaluating Policy Assignment:
* The Training policy is specifically assigned to the "trainingAD.training.lab" group, with a higher priority than the Default policy.
* Conclusion:
* The correct policy applied to the endpoint in the AD group "trainingAD" is the Training policy (A).
References:
* FortiClient EMS policy configuration and priority management documentation from the study guides.
NEW QUESTION # 30
In a ForliSandbox integration, what does the remediation option do?
- A. Alert and notify only
- B. Exclude specified files
- C. Deny access to a tile when it sees no results
- D. Wait for FortiSandbox results before allowing files
Answer: A
Explanation:
* Understanding FortiSandbox Integration:
* In a FortiSandbox integration, various remediation options are available for handling suspicious files.
* Evaluating Remediation Options:
* The remediation option for alerting and notifying without blocking access or waiting for results is essential to understand.
* Conclusion:
* The correct action for the remediation option in this context is to alert and notify only.
References:
* FortiSandbox integration documentation from the study guides.
NEW QUESTION # 31
Refer to the exhibits.
Based on the FortiGate Security Fabric settings shown in the exhibits, what must an administrator do on the EMS server to successfully quarantine an endpoint. when it is detected as a compromised host (loC)?
- A. The administrator must authorize FortiGate on FortiAnalyzer.
- B. The administrator must enable remote HTTPS access to EMS.
- C. The administrator must enable FQDN on EMS.
- D. The administrator must enable SSH access to EMS.
Answer: B
Explanation:
Based on the FortiGate Security Fabric settings shown in the exhibits, to successfully quarantine an endpoint when it is detected as a compromised host (IOC), the following step is required:
* Enable Remote HTTPS Access to EMS:This setting allows FortiGate to communicate securely with FortiClient EMS over HTTPS. Remote HTTPS access is essential for the quarantine functionality to operate correctly, enabling the EMS server to receive and act upon the quarantine commands from FortiGate.
Therefore, the administrator must enable remote HTTPS access to EMS to allow the quarantine process to function properly.
References
* FortiGate Infrastructure 7.2 Study Guide, Security Fabric and Integration with EMS Sections
* Fortinet Documentation on Enabling Remote HTTPS Access to FortiClient EMS
NEW QUESTION # 32
An administrator wants to simplify remote access without asking users to provide user credentials Which access control method provides this solution?
- A. ZTNA full mode
- B. ZTNA IP/MAC littering mode
- C. SSL VPN
- D. L2TP
Answer: A
Explanation:
Simplifying Remote Access:
The administrator wants to simplify remote access without asking users to provide user credentials.
Evaluating Access Control Methods:
ZTNA full mode can provide seamless access by leveraging device identity and posture, eliminating the need for user credentials for each access request.
Other methods like SSL VPN and L2TP typically require user credentials.
Conclusion:
The correct access control method that provides this solution is ZTNA full mode.
Reference:
ZTNA section in the FortiGate Infrastructure 7.2 Study Guide.
NEW QUESTION # 33
An administrator must add an authentication server on FortiClient EMS in a different security zone that cannot allow a direct connection.
Which solution can provide secure access between FortiClient EMS and the Active Directory server?
- A. Configure an Active Directory connector between FortiClient EMS and the Active Directory server.
- B. Configure Active Directory and install FortiClient EMS on the same VM.
- C. Configure and deploy a FortiGate device between FortiClient EMS and the Active Directory server.
- D. Configure a slave FortiClient EMS on a virtual machine.
Answer: C
Explanation:
* Requirement:
* The administrator needs to add an authentication server on FortiClient EMS in a different security zone that cannot allow a direct connection.
* Solution Analysis:
* The goal is to securely connect FortiClient EMS and the Active Directory server despite being in different security zones.
* Evaluating Options:
* Installing FortiClient EMS on the same VM as Active Directory (option B) is not practical due to security zone separation.
* Configuring a slave FortiClient EMS on a virtual machine (option C) does not address the need for secure communication.
* Configuring an Active Directory connector (option D) may not be sufficient without secure routing.
* Conclusion:
* Deploying a FortiGate device between FortiClient EMS and the Active Directory server ensures secure and controlled access between the two zones.
References:
* FortiClient EMS and FortiGate configuration and deployment documentation from the study guides.
NEW QUESTION # 34
Refer to the exhibit.
Based on the settings shown in the exhibit, which two actions must the administrator take to make the endpoint compliant? (Choose two.)
- A. Integrate FortiSandbox tor infected file analysis
- B. Patch applications that have vulnerability rated as high or above.
- C. Run Calculator application on the endpoint.
- D. Enable the web filter profile.
Answer: B,C
Explanation:
* Observation of Compliance Profile:
* The compliance profile shown in the exhibit includes rules for vulnerability severity level and running process (Calculator.exe).
* Evaluating Actions for Compliance:
* To make the endpoint compliant, the administrator needs to ensure that the vulnerability severity level is medium or higher is patched (D).
* Additionally, the Calculator.exe application must be running on the endpoint (B).
* Eliminating Incorrect Options:
* Enabling the web filter profile (A) is not related to the compliance rules shown.
* Integrating FortiSandbox (C) is not a requirement in the given compliance profile.
* Conclusion:
* The correct actions are to run the Calculator application on the endpoint (B) and patch applications with vulnerabilities rated as high or above (D).
References:
* FortiClient EMS compliance profile configuration documentation from the study guides.
NEW QUESTION # 35
ZTNA Network Topology
Refer to the exhibits, which show a network topology diagram of ZTNA proxy access and the ZTNA rule configuration.
An administrator runs the diagnose endpoint record list CLI command on FortiGate to check Remote-Client endpoint information, however Remote-Client is not showing up in the endpoint record list.
What is the cause of this issue?
- A. Remote-Client failed the client certificate authentication.
- B. Remote-Client provided an invalid certificate to connect to the ZTNA access proxy.
- C. Remote-Client provided an empty client certificate to connect to the ZTNA access proxy.
- D. Remote-Client has not initiated a connection to the ZTNA access proxy.
Answer: A
NEW QUESTION # 36
Refer to the exhibit.
Based on the Security Fabric automation settings, what action will be taken on compromised endpoints?
- A. Endpoints will be banned on FortiGate
- B. Endpoints will be quarantined through FortiSwitch
- C. An email notification will be sent for compromised endpoints
- D. Endpoints will be quarantined through EMS
Answer: D
Explanation:
Based on the Security Fabric automation settings shown in the exhibit:
The automation stitch is configured with a trigger for a "Compromised Host." The action specified for this trigger is "Quarantine FortiClient via EMS." This indicates that when an endpoint is detected as compromised, FortiClient EMS will quarantine the endpoint as part of the automation process.
Therefore, the action taken on compromised endpoints will be to quarantine them through EMS.
Reference
FortiGate Security 7.2 Study Guide, Automation Stitches and Actions Section Fortinet Documentation on Configuring Automation Stitches and Quarantine Actions
NEW QUESTION # 37
Which component or device defines ZTNA lag information in the Security Fabric integration?
- A. FortiGate
- B. FortiClient EMS
- C. FortiClient
- D. FortiGate Access Proxy
Answer: B
Explanation:
Understanding ZTNA:
Zero Trust Network Access (ZTNA) requires defining tags for identifying and managing endpoint access.
Evaluating Components:
FortiClient EMS is responsible for managing and defining ZTNA tag information within the Security Fabric.
Conclusion:
The correct component that defines ZTNA tag information in the Security Fabric integration is FortiClient EMS.
Reference:
ZTNA and FortiClient EMS configuration documentation from the study guides.
NEW QUESTION # 38
Refer to the exhibit.
Based on The settings shown in The exhibit, which statement about FortiClient behaviour is Hue?
- A. FortiClientblocks and deletes infected files after scanning them.
- B. FortiClientscans infected files when the user copies files to the Resources folder.
- C. FortiClient quarantines infected ties and reviews later, after scanning them.
- D. FortiClientcopies infected files to the Resources folder without scanning them.
Answer: B
Explanation:
Based on the settings shown in the exhibit, FortiClient is configured to scan files as they are downloaded or copied to the system. This means that if a user copies files to the "Resources" folder, which is not listed under exclusions, FortiClient will scan these files for infections. The exclusion path mentioned in the settings,
"C:\Users\Administrator\Desktop\Resources", indicates that any files copied to this specific folder will not be scanned, but since the question implies that the "Resources" folder is not the same as the excluded path, FortiClient will indeed scan the files for infections.
NEW QUESTION # 39
Exhibit.
Based on the logs shown in the exhibit, why did FortiClient EMS tail to install FortiClient on the endpoint?
- A. The FortiClient antivirus service is not running.
- B. The remote registry service is not running.
- C. The task scheduler service is not running.
- D. The Windows installer service is not running.
Answer: C
Explanation:
https://community.fortinet.com/t5/FortiClient/Technical-Note-FortiClient-fails-to-install-from-FortiClient- EMS/ta-p/193680 The deployment service error message may be caused by any of the following. Try eliminating them all, one at a time.
1. Wrong username or password in the EMS profile
2. Endpoint is unreachable over the network
3. Task Scheduler service is not running
4. Remote Registry service is not running
5. Windows firewall is blocking connection
NEW QUESTION # 40
An administrator configures ZTNA configuration on the FortiGate. Which statement is true about the firewall policy?
- A. It only uses ZTNA tags to control access for endpoints.
- B. It defines ZTNA server.
- C. It uses the access proxy.
- D. It redirects the client request to the access proxy.
Answer: D
Explanation:
"The firewall policy matches and redirects client requests to the access proxy VIP"https://docs.fortinet.com
/document/fortigate/7.0.0/new-features/194961/basic-ztna-configuration
NEW QUESTION # 41
......
Get Instant Access to FCP_FCT_AD-7.2 Practice Exam Questions: https://www.free4torrent.com/FCP_FCT_AD-7.2-braindumps-torrent.html
Reliable Study Materials & Testing Engine for FCP_FCT_AD-7.2 Exam Success!: https://drive.google.com/open?id=1jGtmeUoNjgOcO6TeSGzEFJJ3_ayBO1U7