Pass Nutanix NCP-MCI-6.5 Exam in First Attempt Guaranteed [Jul-2023]
Exam Sure Pass Nutanix Certification with NCP-MCI-6.5 exam questions
NEW QUESTION # 28
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increase CPU utilization%
- B. Increase CPU ready%
- C. Increasing CPU counts will decrease memory utilization
- D. Increase memory utilization%
Answer: C,D
NEW QUESTION # 29
An administrator has been tasked with increasing security on Nutanix cluster by disabling password authentication when accessing the CVM and AHV hosts and instead moving to key-based SSH, What is the easiest way for the administrator to meet these needs?
- A. Restrict access with User Management in Prism.
- B. Configure LDAP authentication through a secure server,
- C. Enable Cluster Lockdown and provide an RSA key.
- D. Enable STIES vie commend line on SSH to CVM.
Answer: C
Explanation:
"An administrator has been tasked with increasing security on Nutanix cluster by disabling password authentication when accessing the CVM and AHV hosts and instead moving to key-based SSH, What is the easiest way for the administrator to meet these needs? Enable Cluster Lockdown and provide an RSA key." Cluster Lockdown mode disables password authentication when accessing the CVM and AHV hosts and instead requires key-based SSH. To enable Cluster Lockdown mode, you need to provide an RSA key.
Therefore, by enabling Cluster Lockdown mode and providing an RSA key, you can increase security on Nutanix cluster by disabling password authentication when accessing the CVM and AHV hosts and instead moving to key-based SSH with minimal effort.
https://next.nutanix.com/how-it-works-22/streamlined-login-and-increase-security-key-based-ssh-login-37397
NEW QUESTION # 30
Refer to Exhibit:
An administrator is trying to put a node into maintenance mode but receives the message shown in the exhibit.
What is a potential reason for this dialog?
- A. LinuxVM1 uses a virtual GPU.
- B. LinuxVM1 uses a vDisks stored in a RFI Datastore
- C. LinuxVM1 uses a Volume Group
- D. LinuxVM1 uses e vDisks stored in a RF3 Datastore
Answer: B
Explanation:
According to the Nutanix Community1, host maintenance mode is used to safely migrate all the user virtual machines (VMs) in the host and make sure no VMs are running on the node. If a VM can't be migrated to another host, you need to shut down the VM for the host to enter into maintenance mode.
According to The Virtualist2, a storage container is a logical segmentation of a storage pool that can be mounted as an NFS datastore on ESXi hosts. You can choose a replication factor (RF) for each storage container, which determines how many copies of data are stored across different nodes.
NEW QUESTION # 31
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Perform standalone reimage of the new node and then add to cluster
- B. Add the node to the cluster and reboot all running VMs to use new release
- C. Destroy cluster and foundation with the new node in place
- D. Add the node to the cluster and leave the existing AOS version in place
Answer: A
NEW QUESTION # 32
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.
Which metrics should the administrator review in Prism Analysis Graphs?
- A. Cluster IO, Network, Database and App Server CPU
- B. Cluster IO, CPU, Memory, Network, App Server CPU
- C. Cluster CPU and Memory Only
- D. Cluster IO, CPU, Memory and Database and App Server CPU
Answer: B
NEW QUESTION # 33
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
- A. Use Cross-Hypervisor DR.
- B. Deploy the Move appliance.
- C. Use shared nothing live migration.
- D. Import the .vmdk into the Image Service.
Answer: A,B
NEW QUESTION # 34
In which two scenarios is an automated live migration likely to occur? (Choose two)
- A. Hypervisor upgrade
- B. AOS upgrade
- C. Cluster resource hotspot
- D. Network upgrade
Answer: A,C
NEW QUESTION # 35
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)
- A. Data Services IP address
- B. iSCSI Multipathing I/O
- C. Enable external client access
- D. Cluster Virtual IP address
- E. Client OS iSCSI initiator
Answer: A,D,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-c.html
NEW QUESTION # 36
How many SSL certificates are used by Prism Element on a Nutanix cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 37
When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?
- A. Perform a live migration on a best-effort basis if resources are available
- B. Restart on a best-effort basis if resources are available
- C. Perform a live migration to other hosts in the AHV cluster
- D. Restart on other hosts in the AHV cluster
Answer: D
NEW QUESTION # 38
Refer to the exhibit.
An administrator is adding a new node to a cluster. The node has been imaged to the same versions of AHV and AOS that the cluster running, configured with appropriate IP addresses, and br0-up has been configured the same the existing uplink bonds When attempting to add the node to the cluster with the Expand Cluster function in Prism , the cluster is unable to find the new node.
Based on the above output from the new node, what is most likely the cause of this issue?
- A. LACP configuration must be completed after cluster expansion
- B. The existing and the expansion node are on different VLANs.
- C. The ports on the upstream switch are not configured for LACP.
- D. There is a firewall blocking the discovery traffic from the tlu
Answer: B
NEW QUESTION # 39
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Upgrade a cluster
- B. Remove a Node from a cluster
- C. Move Nodes between clusters.
- D. Migrate a cluster
- E. Destroy a cluster.
Answer: B,C,E
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_ma Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
* You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
* Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
* You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
* You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION # 40
An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.
Which method should be used to locate these events?
- A. Export the cluster event log to a CSV on the Alerts dashboard.
- B. On the Alerts dashboard, filter based on Impact Type and the desired Time Range.
- C. On the Health dashboard, use the Log Collector to export data based on time stamp.
- D. Configure an Alert Policy to generate an email with the data on the Health dashboard.
Answer: B
NEW QUESTION # 41
Which Nutanix service control ncli, the HTML5 UI, and Rest API?
- A. Zookeeper
- B. Cassandra
- C. Chronos
- D. Prism
Answer: D
Explanation:
Prism is the central service control used by Nutanix to manage the clusters. It provides a unified view of the entire system, and it is used to control the HTML5 UI, the nCLI, and the REST API. Prism is used to manage the resources of the system, such as the nodes, storage, and networks, as well as to monitor the performance of the system and the applications running on it.
https://www.nutanixbible.com/2f-book-of-basics-cluster-components.html
Prism
Key Role: UI and API
* Prism is the management gateway for components and administrators to configure and monitor the Nutanix cluster. This includes Ncli, the HTML5 UI, and REST API.
* Prism runs on every node in the cluster and uses an elected leader like all components in the cluster. All requests are forwarded to the leader using Linux Iptables. This allows access to PRISM using any CVM Ip address.
* Prism communicates with Zeus for cluster configuration data and Cassandra for statistics to present to the user. It also communicates with the ESXi hosts for VM status and related information These are only some of the essential services that make up the CVM functionality. For more information on all the services and various Nutanix Cluster components, refer to the portal documentation.
NEW QUESTION # 42
An administrator is performing validation testing of a new-deploy cluster. During this test, the administrator disconnect each LAN interface from each of the nodes while pinging the hypervisor and guest VMs.
When the first interface is disconnected, pings continue as expected to the hypervisor, but pings stop responding from the guest. Pings continue when the interface is reconnected. When the second interface is disconnected, pings continue to both the hypervisor and guest VMs.
What could be the cause of this error?
- A. Portfast is not enabled on the switch ports
- B. One of the network interfaces has a bad patch cable.
- C. Switch ports are configured with different VLANs
- D. This is normal behavior for a LAN Failover
Answer: C
NEW QUESTION # 43
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?
- A. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
- B. Over-Provision the application VM with additional virtual GPUs.
- C. Create a sperate three-node cluster using the nodes that meet the requirement.
- D. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
Answer: A
NEW QUESTION # 44
During an AHV upgrade, an administrator finds that a critical VM was powered off rather than migration to another host.
Which scenario explains this behavior?
- A. The VM OS hung during migration.
- B. The VM was on the same host as the acropolis leader.
- C. The VM was marked as an agent VM.
- D. NO AHV hosts were able to be scheduled.
Answer: C
NEW QUESTION # 45
When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.
- A. NTP Synchronization
- B. DNS
- C. Flow
- D. API Audit
Answer: C,D
NEW QUESTION # 46
......
Nutanix NCP-MCI-6.5 certification exam is a valuable credential for IT professionals seeking to demonstrate their expertise in multicloud infrastructure management. NCP-MCI-6.5 exam tests the candidate's skills in designing, deploying, and managing a multicloud infrastructure that incorporates public and private cloud resources. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification is part of the Nutanix certification program, which offers a range of certifications for IT professionals at various levels of expertise. Candidates can register for the exam on the Nutanix website and take it at a Pearson VUE testing center.
Real Nutanix NCP-MCI-6.5 Exam Questions Study Guide: https://www.free4torrent.com/NCP-MCI-6.5-braindumps-torrent.html
Download Real NCP-MCI-6.5 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=1T-RPNz2uX9yfWVFT9AFAd3ZZ8iK3sh2-