Use the best ways of preparing for NSE5_FMG-7.0 Exam Dumps with Free4Torrent Fortinet NSE5_FMG-7.0 dump PDF [2023]
Fortinet NSE5_FMG-7.0 exam candidates will surely pass the Exam if they consider the NSE5_FMG-7.0 dumps learning material presented by Free4Torrent.
NEW QUESTION # 38
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)
- A. The Security Fabric license, group name and password are required for the FortiManager Security Fabric
integration - B. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices
- C. The Security Fabric settings are part of the device level settings
- D. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices
Answer: B,C
NEW QUESTION # 39
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?
- A. By a dollar symbol ($) at the end of the device name
- B. By a
- C. By an Asterisk (*) at the end of the device name
- D. By an at symbol (@) at the end of the device name
Answer: C
NEW QUESTION # 40
Which two items are included in the FortiManager backup? (Choose two.)
- A. FortiGuard database
- B. Logs
- C. All devices
- D. Global database
Answer: C,D
NEW QUESTION # 41
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?
- A. WAN zone on FortiGate and WAN interface on FortiManager
- B. port1 on FortiGate and WAN on FortiManager
- C. WAN zone on FortiGate and WAN zone on FortiManager
- D. port1 on both FortiGate and FortiManager
Answer: B
NEW QUESTION # 42
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.)
- A. When you configure MEA, you must open TCP or UDP port 540.
- B. The administrator must have the super user profile.
- C. You must create a MEA special policy on FortiManager using the super user profile
- D. You must open the ports to the Fortinet registry
Answer: B,C
NEW QUESTION # 43
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. virtual-wan-link
- B. port1
- C. port2
- D. auto-discovery
Answer: A
NEW QUESTION # 44
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer is not a part of workflow approval group
- B. Student, who submitted the workflow session, must first self-approve the request
- C. Trainer must close Student's workflow session before approving the request
- D. Trainer does not have full rights over this ADOM
Answer: A
NEW QUESTION # 45
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec
VPN - B. Managed gateways are devices managed by FortiManager in the same ADOM
- C. External gateways are third-party VPN gateway devices only
- D. Managed devices in other ADOMs must be treated as external gateways
Answer: B,D
NEW QUESTION # 46
View the following exhibit:
How will FortiManager try to get updates for antivirus and IPS?
- A. From the default server fdsl.fortinet.com
- B. From the configured override server list only
- C. From public FDNI server with highest index number only
- D. From the list of configured override servers with ability to fall back to public FDN servers
Answer: D
NEW QUESTION # 47
View the following exhibit.
An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. Local-FortiGate will automatically choose an IP Network based on its network interface settings.
- B. 10.0.1.0/24
- C. It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values
- D. 192.168.0.1/24
Answer: B
NEW QUESTION # 48
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- B. 10.200.1.0/24
- C. 192.168.0.1/24
- D. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
Answer: B
Explanation:
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.
NEW QUESTION # 49
Refer to the exhibit.
An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)
- A. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
- B. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
- C. The administrator profile does not have full access privileges like the Super_User profile.
- D. FortiAnalyzer features are not enabled on FortiManager.
Answer: C,D
NEW QUESTION # 50
View the following exhibit.
If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)
- A. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.
- B. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.
- C. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
- D. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
Answer: A,D
Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.
NEW QUESTION # 51
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager will keep all the logs and reports on the FortiManager.
- B. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.
- C. FortiManager will install the logging configuration to the managed devices
- D. FortiManager can be used only as a logging device.
Answer: C
NEW QUESTION # 52
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
- A. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package
- B. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.
- C. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
- D. When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.
Answer: B
NEW QUESTION # 53
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
- B. Allows FortiManager to download IPS packages
- C. Allows FortiManager to automatically configure a default route
- D. Allows FortiManager to run real-time debugs on the managed devices
Answer: A
NEW QUESTION # 54
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)
- A. It supports FTP, SCP, and SFTP.
- B. It can be configured using the CLI and GUI.
- C. It backs up all devices and the FortiGuard database.
- D. It does not back up firmware images saved on FortiManager.
Answer: A,D
NEW QUESTION # 55
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?
- A. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
- B. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
- C. FortiManager ignored the firewall service category General but created a new service category in its database.
- D. FortiManager ignored the firewall service category General and did not update Its database with the value
Answer: A
NEW QUESTION # 56
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- B. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- C. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- D. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
Answer: C
NEW QUESTION # 57
......
Full NSE5_FMG-7.0 Practice Test and 74 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=11-88-w9YKswBM4uV0sVo00c_scE22FmX
Accurate & Verified Answers As Seen in the Real Exam here: https://www.free4torrent.com/NSE5_FMG-7.0-braindumps-torrent.html