Pass Your 2V0-21.23 Exam Easily With 100% Exam Passing Guarantee [2024]
2V0-21.23 Dumps are Available for Instant Access from Free4Torrent
NEW QUESTION # 52
What are two uses cases for VMware Tools? (Choose two.)
- A. Time synchronization with an NTP server
- B. Ability to shut down a virtual machine remotely
- C. Share folders between ESXi hosts and guest OS file systems
- D. Support for unsupported network device drivers
- E. Direct deployment of the Aria Automation Config minion
Answer: B,C
Explanation:
https://www.stevenbright.com/2022/03/deploy-salt-minions-automatically-using-vmware-tools/ Two use cases for VMware Tools are direct deployment of the Aria Automation Config minion and ability to shut down a virtual machine remotely. Direct deployment of the Aria Automation Config minion is a feature that allows the administrator to deploy a configuration management agent to a virtual machine using VMware Tools. This feature enables automation and orchestration of virtual machine configuration tasks. Ability to shut down a virtual machine remotely is a feature that allows the administrator to gracefully power off a virtual machine from the vSphere Client or other VMware products. This feature requires VMware Tools to be installed and running on the guest operating system. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vmwaretools.doc/GUID-28C39A00-743B-4E23-9681-66254A15C2A0.html
NEW QUESTION # 53
An administrator needs to consolidate a number of physical servers by migrating the workloads to a software-defined data center solution.
Which VMware solution should the administrator recommend?
- A. VMware
- B. VMware vSAN
- C. VMware Horizon
- D. VMware vSphere
Answer: D
Explanation:
Explanation
Option C is correct because VMware vSphere is the solution that provides a software-defined data center platform that can consolidate physical servers by migrating the workloads to virtual machines. Option A is incorrect because VMware Horizon is a solution for virtual desktop infrastructure (VDI) and application delivery. Option B is incorrect because VMware vSAN is a solution for software-defined storage that is integrated with vSphere. Option D is incorrect because VMware NSX is a solution for software-defined networking that is integrated with vSphere. References: https://www.vmware.com/products/vsphere.html
NEW QUESTION # 54
An administrator is attempting to configure Storage I/O Control (SIOC) on five datastores within a vSphere environment. The administrator is being asked to determine why SIOC configuration completed successfully on only four of the datastores.
What are two possible reasons why the configuration was not successful? (Choose two.)
- A. The datastore has multiple extents.
- B. SAS disks are used for the datastore.
- C. The datastore is using ISCSI.
- D. The administrator is using NFS storage.
- E. The datastore contains Raw Device Mappings (RDMs).
Answer: A,E
Explanation:
Explanation
SIOC configuration may fail if the datastore contains RDMs or has multiple extents, as these are not supported by SIOC.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-FB3F5C5C-D3F6-4 Storage I/O Control is supported on Fibre Channel-connected, iSCSI-connected, and NFS-connected storage.
Raw Device Mapping (RDM) is not supported. Storage I/O Control does not support datastores with multiple extents.
NEW QUESTION # 55
An administrator is investigating user logon failures for a VMware vCenter instance Where can the administrator find log files containing information related to user login activities?
- A. In the vSphere Client when viewing the vCenter virtual machine
- B. On the vCenter Server Appliance
- C. On the ESXi host using the Direct Console User Interface
- D. On the vCenter Management Interface
Answer: B
Explanation:
The administrator can find log files containing information related to user login activities on the vCenter Server Appliance, which is a preconfigured Linux-based virtual machine that runs all vCenter Server services. The log files are located in /var/log/vmware/vmware-vpx/vpxd.log and /var/log/vmware/sso/ssoAdminServer.log directories. Reference: https://docs.vmware.com/en/VMware-vSphere/8.0/com.vmware.vsphere.troubleshooting.doc/GUID-5F9A7E49-5F9E-4F8A-BE6A-CAC5EE8E3734.html
NEW QUESTION # 56
Refer to the exhibit.
Given the configuration shown in the exhibit, what should the administrator do if the latest VM template contains changes that are no longer needed?
- A. Check out App-LibTemplate (3)
- B. Revert to App-LibTernplate (2)
- C. Delete App-LibTemplate (2)
- D. Delete App-LibTemplate (3)
Answer: D
Explanation:
Explanation
Deleting App-LibTemplate (3) will remove the changes that are no longer needed and revert to the previous version of the template.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-9A5093A5-C54F
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-D69B0279-CC9B
NEW QUESTION # 57
An administrator plans to update the Supervisor cluster and has noticed some of the Tanzu Kubemetes Grid clusters are running an incompatible version.
Which action must the administrator take before proceeding with the Supervisor cluster update?
- A. No action is needed - Tanzu Kubernetes Grid clusters will be updated automatically as part of the update process.
- B. Update all Tanzu Kubernetes Grid clusters to the latest version prior to the Supervisor cluster update.
- C. No action is needed - Incompatible Tanzu Kubernetes Grid clusters can be manually updated after the Supervisor cluster update.
- D. Update incompatible Tanzu Kubernetes Grid clusters prior to the Supervisor cluster update.
Answer: D
Explanation:
Explanation
Option D is correct because it indicates that the administrator must update incompatible Tanzu Kubernetes Grid clusters prior to the Supervisor cluster update, as this will ensure that there are no compatibility issues or disruptions during or after the update process. Option A is incorrect because it is not necessary to update all Tanzu Kubernetes Grid clusters to the latest version prior to the Supervisor cluster update, as some clusters may already be compatible with the new version. Option B is incorrect because Tanzu Kubernetes Grid clusters will not be updated automatically as part of the update process, as they require manual intervention from the administrator. Option C is incorrect because incompatible Tanzu Kubernetes Grid clusters cannot be manually updated after the Supervisor cluster update, as they may become inaccessible or unstable due to compatibility issues. References:
https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-9F9E3F8C-0E2B-4B6A-8
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-with-tanzu-maintenance/GUID-292482C2-A5FA-44 If a Tanzu Kubernetes Grid cluster is incompatible with vSphere 8, upgrade the cluster before proceeding with the system upgrade.
NEW QUESTION # 58
An administrator plans to update the Supervisor cluster and has noticed some of the Tanzu Kubemetes Grid clusters are running an incompatible version.
Which action must the administrator take before proceeding with the Supervisor cluster update?
- A. No action is needed - Tanzu Kubernetes Grid clusters will be updated automatically as part of the update process.
- B. Update all Tanzu Kubernetes Grid clusters to the latest version prior to the Supervisor cluster update.
- C. No action is needed - Incompatible Tanzu Kubernetes Grid clusters can be manually updated after the Supervisor cluster update.
- D. Update incompatible Tanzu Kubernetes Grid clusters prior to the Supervisor cluster update.
Answer: D
Explanation:
Option D is correct because it indicates that the administrator must update incompatible Tanzu Kubernetes Grid clusters prior to the Supervisor cluster update, as this will ensure that there are no compatibility issues or disruptions during or after the update process. Option A is incorrect because it is not necessary to update all Tanzu Kubernetes Grid clusters to the latest version prior to the Supervisor cluster update, as some clusters may already be compatible with the new version. Option B is incorrect because Tanzu Kubernetes Grid clusters will not be updated automatically as part of the update process, as they require manual intervention from the administrator. Option C is incorrect because incompatible Tanzu Kubernetes Grid clusters cannot be manually updated after the Supervisor cluster update, as they may become inaccessible or unstable due to compatibility issues. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-9F9E3F8C-0E2B-4B6A-8C5C-3F8E5F6B4E9D.html
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-with-tanzu-maintenance/GUID-292482C2-A5FA-44B5-B26E-F887A91BB19D.html If a Tanzu Kubernetes Grid cluster is incompatible with vSphere 8, upgrade the cluster before proceeding with the system upgrade.
NEW QUESTION # 59
An administrator is planning to upgrade a VMware vCenter instance to version 8. It is currently integrated with the following solutions:
* VMware Aria Automation
* VMware Cloud Director
Which tool can the administrator use to run Interoperability reports before the upgrade process?
- A. vCenter Server Update Planner
- B. vSphere Lifecycle Manager
- C. sphere Update Manager
- D. VMware Aria Suite Lifecycle
Answer: A
Explanation:
The tool that can be used to run interoperability reports before upgrading a vCenter Server instance is vCenter Server Update Planner, which allows checking compatibility with other VMware products.
NEW QUESTION # 60
If a distributed switch uses the "Route based on physical NIC load" load balancing algorithm, what does the mean send or receive utilization of an uplink need to exceed for the flow of traffic to move to the second uplink?
- A. 60 percent of the capacity over a 40 second period
- B. 75 percent of the capacity over a 40 second period
- C. 75 percent of the capacity over a 30 second period
- D. 60 percent of the capacity over a 30 second period
Answer: C
Explanation:
Explanation
The distributed switch calculates uplinks for virtual machines by taking their port ID and the number of uplinks in the NIC team. The distributed switch tests the uplinks every 30 seconds, and if their load exceeds 75 percent of usage, the port ID of the virtual machine with the highest I/O is moved to a different uplink.
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-networking/GUID-959E1CFE-2AE4-4A67-B4D4-2D
NEW QUESTION # 61
During the staging of a patch on a vCenter Server Appliance, an error was encountered and the process stopped. An administrator resolved the root cause and is ready to continue with the staging of the patch.
From the vCenter Management Interface, which action should the administrator take to continue the process from the point at which the error occurred?
- A. Use the Stage Only option to restart the staging.
- B. Use the Unstage option to restart the staging.
- C. Use the Resume option to resume the staging.
- D. Use the Stage and Install option to resume the staging.
Answer: C
Explanation:
Explanation
docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.upgrade.doc/GUID-FF533442-66F0-4797-976
NEW QUESTION # 62
An administrator successfully installs VMware ESXi onto the first host of a new vSphere cluster but makes no additional configuration changes. When attempting to log into the vSphere Host Client using the Fully Qualified Domain Name (FQDN) of the host, the administrator receives the following error message:
"Server Not Found - We can't connect to the server at esxi101.corp.local?
The following information has been provided to complete the configuration:
*Host FQDN esxi101.corp.local
*Management VLAN ID: 10
*DHCP: No
*Management IP Address: 172.16 10.101 / 24
*Management IP Gateway: 172.16.10.1
. Corporate DNS Servers: 172.16 10.5, 172.16.10.6
*ONS Domain: corp.local
In addition, all host configurations must also meet the following requirements:
*The management network must use only IPv4 network protocols.
*The management network must be fault tolerant
Which three high level tasks should the administrator complete, at a minimum, in order to successfully log into the vSphere Host Client using the FQDN for esxi101 and complete the configuration? (Choose three.)
- A. Update the VMware ESXi Management Network IPv4 configuration to use a static a IPv4 address
- B. Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for names resolution
- C. Disable IPv6 for the VMware ESXi Management Network
- D. Ensure a DNS A Record is created for the VMware ESXi host on the corporate DNS servers.
- E. Configure at least two network adapters for the VMware ESXi Management Network
- F. Set the value of the VMware ESXi Management Network VLAN ID to 10
Answer: A,D,F
NEW QUESTION # 63
A group of new virtual machines have been deployed using thin-provisioned disks due to the limited storage space available in an environment. The storage team has expressed concern about extensive use of this type of provisioning.
An administrator is tasked with creating a custom alarm to notify the storage team when thin provisioning reaches a certain capacity threshold.
Where must the administrator define this alarm?
- A. Virtual machine
- B. Datastore
- C. Datastore cluster
- D. Data center
Answer: B
Explanation:
Explanation
To create a custom alarm to notify when thin provisioning reaches a certain capacity threshold, the administrator must define this alarm at the datastore level, as it is related to datastore usage.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.monitoring.doc/GUID-B8DC03CB-EFB
NEW QUESTION # 64
An administrator is tasked with looking into the disaster recovery options for protecting a database server using VMware vSphere Replication.
The following requirements must be met:
* The virtual machine must remain online during the protection.
* The virtual machine's snapshots must be used as part of the replication process.
Which step must the administrator complete to accomplish this task?
- A. Configure the virtual machine storage policy.
- B. Perform a full initial synchronization of the source virtual machine to the target location.
- C. Configure network traffic isolation for vSphere Replication.
- D. Enable guest OS VSS quiescing for this virtual machine.
Answer: B
Explanation:
Explanation
https://docs.vmware.com/en/vSphere-Replication/8.7/com.vmware.vsphere.replication-admin.doc/GUID-C24930
NEW QUESTION # 65
An administrator is deploying a new all flash vSAN cluster based on the vSAN Original Storage Architecture (OSA).
What is the minimum supported network throughput in Gb/s for each host?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
The minimum supported network throughput in Gb/s for each host in an all flash vSAN cluster based on the vSAN Original Storage Architecture (OSA) is 10.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan-planning.doc/GUID-FCEA0CDD-
NEW QUESTION # 66
Refer to the exhibit.
An administrator is tasked with adding new capacity to an existing software-defined data center (SDDC).
* The SDDC currently hosts two vSphere clusters (ClusterA and ClusterB) with different CPU compatibilities.
* vSphere vMotion and vSphere Distributed Resource Scheduler (DRS) are currently in use in the SDDC.
* The new capacity will be implemented by provisioning four ESXi hosts running a new generation of Intel Skylake CPUs.
* All workload virtual machines (VMs) must support live migration to any cluster in the SDDC.
The administrator noticed the running critical "ever virtual machine (VM) shown in the exhibit is not migrating using vSphere vMotion to the original Clusters A or B.
Which three steps must the administrator take to support this functionality? (Choose three.)
- A. Power off the VM.
- B. Reboot the VM.
- C. Configure the Enhanced vMotion Compatibility (EVC) on the VM to Intel Skylake.
- D. Configure the Enhanced vMotion Compatibility (EVC) on vSphere Cluster A and B to support Intel Skylake.
- E. Power on the VM.
- F. Disable the Enhanced vMotion Compatibility (EVC) on the VM.
Answer: A,D,E
NEW QUESTION # 67
An administrator enables Secure Boot on an ESXi host. On booting the ESXi host, the following error message appears:
Fatal error: 39 (Secure Boot Failed)
- A. The administrator attempted to boot with a bootloader that is unsigned or has been tampered with.
- B. A package (VIB or driver) has been tampered with.
- C. The Trusted Platform Module chip has failed.
- D. The kernel has been tampered with.
Answer: D
Explanation:
The fatal error "Secure Boot Failed" may indicate that either the kernel or a package (VIB or driver) has been tampered with, which violates the Secure Boot integrity check.
NEW QUESTION # 68
An administrator is creating a content library to manage VM templates and ISO images. The administrator wants to password-protect the images and templates and share them with a remote site.
Which two tasks must the administration perform when creating the content library? (Choose two.)
- A. Create a subscribed content library.
- B. Select an NFS datastore.
- C. Enable the security policy.
- D. Publish the local content library.
- E. Enable authentication.
Answer: D,E
Explanation:
Explanation
To password-protect and share images and templates with a remote site, the administrator needs to publish the local content library, which makes it available for subscription by other vCenter Server instances; and enable authentication, which requires users to enter credentials when accessing the content library.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-FBEED81C-F9D
NEW QUESTION # 69
An administrator wants to use tag-based placement rules on their virtual machine disks using VMware vCenter.
Which option would allow the administrator to achieve this?
- A. Storage I/O Control
- B. Storage Policy Based Management
- C. vSphere Distributed Resource Scheduler (DRS)
- D. vSphere Storage APIs for Storage Awareness (VASA)
Answer: B
Explanation:
Explanation
https://vnote42.net/2020/01/15/vcenter-tag-based-vm-placement/
NEW QUESTION # 70
Refer to the exhibit.
An administrator set up the following configuration:
* The distributed switch has four ESXi hosts, and each host has two 10 Gbps NICs.
* In the Network I/O Control configuration, the amount of bandwidth reserved for virtual machine (VM) traffic if 4 Gbps.
The administrator wants to guarantee that VMs in the Retail distributed port group can access 50 percent of the available reserved bandwidth for VM traffic.
Given this scenario, what should the size (in Gbps) of the Retail network resource pool be?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
4Gbps*8Nic=32Gbps*50%=16Gbps
NEW QUESTION # 71
An administrator manages VM templates and ISO images for a remote office. Their main requirements are to store these templates in a single repository and manage different versions of the templates.
What solution should the administrator deploy to meet these requirements?
- A. A local content library
- B. A subscribed content library
- C. A vSAN datastore
- D. A shared VMFS datastore
Answer: A
Explanation:
Explanation
https://4sysops.com/archives/how-to-create-a-vmware-content-library/#:~:text=A%20VMware%20content%20li
NEW QUESTION # 72
An administrator is preparing to perform an update to vSphere clusters that are running vSAN. The administrator wants to ensure that the following requirements are met as part of the update:
*All hosts in the cluster are updated with the same software.
*The firmware versions on the hosts are updated
*The new software versions are checked for compliance against the vSAN Hardware Compatibility List.
Which three steps should the administrator take to meet these requirements? (Choose three.)
- A. Configure vSphere Lifecycle Manager with an image for the cluster.
- B. Register the vendor hardware management system as a vCenter Server extension.
- C. Run a hardware compatibility check using vSphere Lifecycle Manager
- D. Configure vSphere Lifecycle Manager with a baseline for the cluster.
- E. Download the firmware updates from the vendor website.
- F. Download the firmware updates from the VMware website
Answer: A,B,C
Explanation:
Explanation
The administrator should take these three steps to perform an update to vSphere clusters that are running vSAN:
Configure vSphere Lifecycle Manager with an image for the cluster, which allows the administrator to specify the desired ESXi version and firmware for the hosts in the cluster.
Register the vendor hardware management system as a vCenter Server extension, which allows the administrator to update the firmware on the hosts using vSphere Lifecycle Manager. The vendor hardware management system can also provide the firmware updates to vSphere Lifecycle Manager, so there is no need to download them from the vendor website separately.
Run a hardware compatibility check using vSphere Lifecycle Manager, which verifies that the new software and firmware versions are compatible with the vSAN Hardware Compatibility List.
NEW QUESTION # 73
The vCenter inventory contains a virtual machine (VM) template called Linux-01. The administrator wants to install a software patch into Linux-01 while allowing users to continue to access Linux-01 to deploy VMs. Which series of steps should the administrator take to accomplish this task?
- A. 1. Clone Linux-01.
2. Convert the clone to a VM
3. Install the software patch.
4. Convert the VM back to a template. - B. 1. Verify that Linux-01 is in a content library
2. Clone Linux-01
3. Convert the clone to a VM
4. Install the software patch. - C. 1. Convert Linux-01 to a VM
2 Install the software patch
3 Convert the VM back to a VM template
4 Add Linux-01 to the content library. - D. 1. Verify that Linux-01 is in a content library
2. Checkout Linux-01
3. Install the software patch
4.Check in Linux-01
Answer: D
Explanation:
The administrator should clone Linux-01, which creates a copy of the virtual machine template. The administrator should then convert the clone to a VM, which allows the administrator to power on and modify the virtual machine. The administrator should then install the software patch on the VM, which updates the application. The administrator should then convert the VM back to a template, which preserves the changes made to the VM and allows users to deploy VMs from it. Reference: https://docs.vmware.com/en/VMware-vSphere/8.0/com.vmware.vsphere.vm_admin.doc/GUID-E8E854DD-AA97-4E0C-8419-CE84F93C4058.html
NEW QUESTION # 74
An administrator is tasked with moving an application and guest operating system (OS) running on top of a physical server to a software-defined data center (SDDC) in a remote secure location.
The following constraints apply:
* The remote secure location has no network connectivity to the outside world.
* The business owner is not concerned if all changes in the application make it to the SDDC in the secure location.
* The application's data is hosted in a database with a high number of transactions.
What could the administrator do to create an image of the guest OS and application that can be moved to this remote data center?
- A. Use storage replication to replicate the guest OS and application.
- B. Restore the guest OS from a backup.
- C. Create a hot clone of the physical server using VMware vCenter Converter.
- D. Create a cold clone of the physical server using VMware vCenter Converter.
Answer: D
Explanation:
Explanation
Option B is correct because it allows the administrator to create a cold clone of the physical server using VMware vCenter Converter, which will create an image of the guest OS and application that can be moved to this remote data center without requiring network connectivity or affecting the application's data. Option A is incorrect because creating a hot clone of the physical server using VMware vCenter Converter will require network connectivity and may affect the application's data due to changes during conversion. Option C is incorrect because restoring the guest OS from a backup will require network connectivity and may not include the latest changes in the application. Option D is incorrect because using storage replication to replicate the guest OS and application will require network connectivity and may not be feasible for a physical server.
References:
https://docs.vmware.com/en/vCenter-Converter-Standalone/6.2/com.vmware.convsa.guide/GUID-9F9E3F8C-0E
NEW QUESTION # 75
A vSphere cluster has the following vSphere Distributed Resource Scheduler (DRS) group configuration:
* Virtual machine (VM) group named DB
* Host groups named PROD11 and PROD55
The administrator wants to force the VMs in the DB group to run on the hosts in the PROD11 group. However, if all the hosts in PROD55.
Which VM/Host rule must the administrator create to ensure that these requirements are met?
- A. A preferential rule between the DB group and the PROD55 group
- B. A required rule between the DB group and the PROD11 group
- C. A preferential rule between the DB group and PROD11 group
- D. A preferential rule between the DB group and the PROD55 group
Answer: C
Explanation:
Option A is correct because it allows the administrator to create a preferential rule between the DB group and PROD11 group, which will force the VMs in the DB group to run on the hosts in the PROD11 group if possible, but will allow them to run on the hosts in PROD55 group if necessary. Option B is incorrect because it will create a preferential rule between the DB group and PROD55 group, which will force the VMs in the DB group to run on the hosts in PROD55 group if possible, which is not what the administrator wants. Option C is incorrect because it is the same as option B Option D is incorrect because it will create a required rule between the DB group and PROD11 group, which will force the VMs in the DB group to run only on the hosts in PROD11 group and not allow them to run on the hosts in PROD55 group if needed. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-60077B40-66FF-4625-934A-641703ED7601.html
NEW QUESTION # 76
......
VMware 2V0-21.23 certification exam is a rigorous test of the candidates' knowledge and skills in vSphere technology. 2V0-21.23 exam consists of 70 multiple-choice questions, and the candidates are given 120 minutes to complete it. To pass the exam, candidates must achieve a score of at least 300 out of 500. 2V0-21.23 exam fee is $250 USD, and candidates can take the exam at Pearson VUE testing centers worldwide.
Study resources for the Valid 2V0-21.23 Braindumps: https://www.free4torrent.com/2V0-21.23-braindumps-torrent.html
Latest VCP-DCV 2023 2V0-21.23 Actual Free Exam Questions: https://drive.google.com/open?id=1rPfZfaXVc6zVOcDkhd0azlmjNCPIPqwy