Updated Dec-2024 Official licence for HPE0-V14 Certified by HPE0-V14 Dumps PDF
Grab latest Amazon HPE0-V14 Dumps as PDF Updated on 2024
NEW QUESTION # 78
Refer to the exhibit.
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)
Answer:
Explanation:
Explanation
Answer 5710,10,535T
NEW QUESTION # 79
What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?
- A. Single Mode Fiber
- B. Multi-mode Fiber
- C. Direct Attach Cable (DAC)
- D. Twin-Ax
Answer: A
Explanation:
Explanation
Single-mode uses a single relatively straight beam of light, transmitted directly through a core of glass (or occasionally plastic) that's usually 50 microns across. Single-mode accommodates large power levels, and is almost exclusively used for Long Range (LR) applications.
Reference: https://info.hummingbirdnetworks.com/blog/answering-your-frequently-asked-QUESTION NO:s-about- different-types-of-10-gigabit-cisco-sfp-units
NEW QUESTION # 80
A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?
- A. Configure scheduled reports to export the data to the listener.
- B. Configure a scope to include the listener.
- C. Configure the listener as a managed device.
- D. Configure SNMP Trap Forwarding.
Answer: D
Explanation:
Reference:
https://h20195.www2.hpe.com/v2/getpdf.aspx/4AA5-3811ENW.pdf?
NEW QUESTION # 81
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?
- A. iLO Advanced Edition
- B. UEFI System Configuration
- C. HPE SUM
- D. HPE SUT
Answer: A
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026111en_us#N11E72
iLO AlertMail enables user to configure iLO to send alert conditions detected independently of the host operating system to one or more email addresses. iLO AlertMail messages include major host system events that appear in the IML. For example, if a fan failure occurs, an event is recorded in the IML and an email message with the details is sent to the configured email addresses.
NEW QUESTION # 82
A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?
- A. HPE SSA Diagnostics
- B. Intelligent Provisioning
- C. HPE SmartStart
- D. Smart Storage Administrator
Answer: B
Explanation:
Reference:
https://community.hpe.com/t5/Alliances/Get-HPE-Gen10-Servers-with-Windows-Server-2019-up- and-Running-in/ba-p/7066128#.XnxeVG5RWQ4
NEW QUESTION # 83
A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?
- A. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches
- B. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches
- C. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches
- D. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches
Answer: B
Explanation:
Explanation
Needs 4 switches for port count, customer wants minimum of managed devices so one stack, VSX only supports two switches so must be an IRF based stack. As to ShaunSong's comment, 10GBaseT ports also negotiate 1000BaseT so are inherently 1/10Gb capable.
NEW QUESTION # 84
A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for additional equipment that may be added in the future.
How should the solution integrator respond'?
- A. HPE PDUs support elevated temperatures up to 75°C (1673F), in case the additional equipment power draw results in increased heat generation.
- B. Two HPE Standard G2 PDUs will support 42U of racked equipment, so any equipment added in the future will be accommodated by the current PDU configuration
- C. HPE Standard Series G2 PDUs allow additional inlet power cords to support additional equipment in the future.
- D. HPE G2 Advanced racks allow additional PDUs to be added if additional equipment requires more outlets or more available power
Answer: B
NEW QUESTION # 85
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?
- A. vertically, side by side on both sides of the rack with the outlets facing the center
- B. at the top of the rack with the cables running between the RETMA rails
- C. horizontally on extension bars mounted directly to the frame for improved clearance
- D. in the bottom bay of the rack with the outlets facing the front
Answer: A
NEW QUESTION # 86
Match each characteristic to the correct storage type.
Answer:
Explanation:
Reference:
https://www.excitingip.com/1358/jbod-just-a-bunch-of-disks/ https://www.enterprisestorageforum.com/storage-networking/nas-vs.-san-differences-and-use-cases.html
NEW QUESTION # 87
Refer to the exhibit.
The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 88
Refer to the exhibits.
A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)
- A. 24 SFF drives
- B. 24 LFF drives
- C. 48 SFF drives
- D. 12 SFF drives
- E. 12 LFF drives
Answer: B,E
NEW QUESTION # 89
Match the feature to the lowest iLO5 license in which it is available
Answer:
Explanation:
Explanation
Last - last
3-2
1-1
3-3
NEW QUESTION # 90
A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
* Multi-protocol connectivity
* Flash-accelerated storage
* Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?
- A. StoreEasy
- B. SimpliVity
- C. StoreVirtual VSA
- D. MSA
Answer: D
NEW QUESTION # 91
Match each HPE solution to its optimal use case.
Answer:
Explanation:
NEW QUESTION # 92
A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on theleft to their appropriate location in the environment on the right.
Answer:
Explanation:
NEW QUESTION # 93
......
Latest HPE0-V14 Exam Dumps HP Exam from Training: https://www.free4torrent.com/HPE0-V14-braindumps-torrent.html
Newly Released HPE0-V14 Dumps for HPE ATP - Hybrid IT Solutions V2 Certified: https://drive.google.com/open?id=1PfJPnyuUB-TrIgYqDYPMlMu9YbM-WySw