[2021] 1Z0-1079-20 by Global Trade and Transportation Management Cloud Actual Free Exam Practice Test
Free Global Trade and Transportation Management Cloud 1Z0-1079-20 Exam Question
NEW QUESTION 33
Which are the two ways in which Milestones differ from Agents? (Choose two.)
- A. Milestones may be made up of one or more Agents.
- B. Milestones monitor for a condition to occur, whereas Agents only start and stop based on a time-based schedule.
- C. Milestones may be both "reactive" (for example, they monitor for a condition to occur) and "proactive" (for example, they can initiate before, at, or a prescribed number of times after a condition occurs).
- D. Agents monitor for a condition to occur, whereas Monitors only start and stop based on a time-based schedule.
- E. Agents may be made up of one or more Milestones.
Answer: A,C
NEW QUESTION 34
You've executed a CSV upload in which you have modified some existing records, and created some new records. There were no errors during the upload. However, OTM is still retrieving only the old data, not the new data that was just uploaded.
Select the action that you can take to address this.
- A. Rerun the upload, this time making sure that you specify the "dd" command.
- B. Rerun the upload, this time making sure that you specify the "ii" command.
- C. You should clear the OTM cache.
- D. You must reboot the database server in order to commit the changes.
- E. Rerun the upload, this time making sure that you specify the "uu" command.
Answer: D
NEW QUESTION 35
Which two statements about shipment statuses are true? (Choose two.)
- A. ENROUTE_DIVERTED - indicates that the shipment was delayed in leaving the previous location due to the late pickup time, and will be late arriving to the destination location.
- B. ENROUTE_ENROUTE - indicates that the shipment is moving from one location to another.
- C. ENROUTE_UNLOADED PARTIAL - indicates that the shipment has reached the final destination and is in the process of being unloaded.
- D. ENROUTE_NOT STARTED - indicates that the shipment has not been picked up from the initial pickup stop yet.
- E. ENROUTE_DELAYED - indicates that the shipment was unable to travel on the planned route, and has taken a detour.
Answer: B,D
NEW QUESTION 36
You are writing an order release agent and need to listen for an order modification event triggered by an integration update to the order release.
What is the impact to the agent process if you set the "before persist" flag on the ORDER - MODIFIED event?
- A. OTM stages the new data, will perform the agent actions, will not allow you to use certain actions.
- B. OTM will perform the agent actions but will not persist any changes to the object.
- C. OTM will persist the new data immediately after the agent is triggered and then perform the agent actions.
- D. OTM will not persist the new data but will perform the agent actions as long as they do not require persisting the new data.
- E. OTM stages the new data but will not perform the agent actions if the data is not persisted properly.
Answer: B
NEW QUESTION 37
How should you set up permissions for users to access data in other domains?
- A. Assign Access Control List in User Role.
- B. Assign User Preference via Manage User access.
- C. Use Domain Grants.
- D. Use Insert User Role in VPD Profile.
Answer: C
NEW QUESTION 38
View the exhibit.
Bob is a user in the "3PL COMPANY" domain and has been assigned the "Admin" User Role ID.
What must you do to make sure that Bob has the authority to view and plan all the orders from all the Client domains shown?
- A. Do nothing, because Bob will automatically be authorized to plan all of the orders.
- B. Create a Role in each of the Client domains with the same name, and add Bob's user ID to the Role.
- C. Use OTM's VPD to add Bob to the Planner Role in the 3PL COMPANY domain.
- D. Create a Role in the 3PL COMPANY domain that has at least "Default" authority, and use OTM's GRANTS to assign Bob's user ID in each of the Client domains.
- E. Use OTM's VPD to assign Bob's user ID in each of the Client domains.
Answer: D
NEW QUESTION 39
When a new Service Provider is created, OTM automatically does which of the following?
- A. OTM associates the Service Provider calendar with the calendar of the CORPORATION ID identified during setup.
- B. OTM assigns the default Calendar defined in the Parameter Set.
- C. OTM sends an email or fax to the Service Provider contact, depending on the contact's preferred contact method.
- D. OTM creates a corresponding LOCATION, with the location Role of "CARRIER".
Answer: B
NEW QUESTION 40
Which one of the following is the correct procedure for setting up and assigning a Screen Set ID to a User?
- A. Always unassign existing menu and create a screen Set ID, assign it to User.
- B. Create a Screen Set ID and assign it to Domain.
- C. Create a Screen Set ID and assign it to User.
- D. Create a Screen set ID, assign it to Menu Manager and assign it to User.
Answer: D
NEW QUESTION 41
Which three statements are true when configuring allocation rules for OTM Freight Payment? (Choose three.)
- A. One cannot use the same rule in more than one allocation rule profile.
- B. Allocation rules need to be set up before the allocation rule profiles.
- C. The allocation rules in the profile can be sequenced in the allocation rule profile.
- D. OTM uses the first allocation rule that applies.
- E. For a service provider, one can assign one allocation rule based on the planned cost and another based on the actual cost.
Answer: B,D,E
NEW QUESTION 42
In the process of "Adjust shipment cost scenario," you select "reversing and adjusting" Shipment cost.
What will be performed by OTM?
- A. The system gives the user an option to update the amount.
- B. The system takes the original cost and adds or subtracts an amount to it to create the new cost.
- C. The system reverses a cost by creating a new cost with a negative amount that matches the amount of the original cost.
- D. The system creates a new cost that negates the original cost. Then it creates another new cost with the new cost value.
Answer: C
NEW QUESTION 43
Select the three business objects that can be managed using the Fleet Management module. (Choose three.)
- A. Driver work hours
- B. Fleet power units
- C. Driver time off, sick time, vacations, etc.
- D. Driver payroll
- E. Fleet equipment
Answer: C,D,E
NEW QUESTION 44
Identify the incorrect option about the commodity setup.
- A. Specific temperature controls cannot be assigned while defining a commodity.
- B. You can select transportation modes while defining a commodity.
- C. Incompatible commodities can be captured while defining a commodity.
- D. You can link commodity with equipment types while defining a new commodity.
Answer: A
NEW QUESTION 45
In which two of the following cases is it useful to use the "Show Routing Options" shipment planning method? (Choose two.)
- A. when you want to auto-tender the shipment after planning is complete
- B. when you want to override the delivery constraints on the Order Base
- C. when you want to specify the carrier that you want to receive the shipment tender
- D. when you want to view OTM's recommendation without actually planning the shipment
- E. when you want to specify the itinerary that you want to use for the shipment
Answer: A,B
NEW QUESTION 46
What must you do in order to export data from the CONTACT table, so that the data only includes contacts with email addresses ending with "@oracle.com"?
- A. The CSV utility is useful for managing large amounts of data, but it is not capable of filtering data during the export process.
- B. Create a CSVUTIL file that specifies the "@oracle.com" qualifier.
- C. Use the "Where" clause on the CSV Export screen to specify the "@oracle.com" qualifier.
- D. Export the data first, and then use software such as MS Excel, MS Access, or direct SQL to filter the data.
Answer: D
NEW QUESTION 47
Shipment# 10059 is a Multi-Stop shipment with two orders. Both orders are picked up in New York City. One of the orders is dropped off in Philadelphia, Pennsylvania, and the other order dropped off in Baltimore, Maryland. There is empty capacity on this shipment for you to add another order (# 1234), which is picking up in Philadelphia and dropping off in Baltimore. The status of Shipment# 10059 is "SECURE RESOURCES:
NOT_STARTED"
Which shipment planning option should you use to ensure that order release# 1234 is assigned to Shipment#
10059?
- A. Manual
- B. Move Order to Existing Shipment
- C. Show Routing Options
- D. Bulk Plan
Answer: C
NEW QUESTION 48
When reviewing Invoices in the OTM Payment Invoice Manager, you have the option of selecting the "Pass Through" checkbox.
Identify the correct statement about what the "Pass Through" checkbox does.
- A. It allows for the invoices from other shipments to be consolidated onto this invoice.
- B. It allows the invoice to be paid without consideration for any invoice matching rules.
- C. It allows for more shipment cost lines to be added to the associated shipment.
- D. It allows for more invoice amounts to be allocated to the invoice.
Answer: A
NEW QUESTION 49
Select the three correct statements regarding Freight Settlement in OTM. (Choose three.)
- A. Freight Settlement in OTM may be used to pay invoices to carriers as well as bill customers for freight.
- B. Freight Invoices may be created within OTM or interfaced from an external system.
- C. Rules for matching, approval, and allocation are the cornerstones of automation in Freight Settlement.
- D. Invoice checks may be printed out of OTM.
- E. Invoices in OTM must be tied to a shipment.
Answer: A,B,D
NEW QUESTION 50
After executing the Approve Multiple Invoices function, Oracle Transportation Management displays an Approve Invoice results page.
Which four invoice values are displayed on this results page? (Choose four.)
- A. Amount to Pay
- B. Voucher ID
- C. Approval Status
- D. Invoice ID
- E. Shipment ID
- F. Service Provider ID
Answer: A,B,D,E
NEW QUESTION 51
If you have just installed OTM, which domain would not be created by default?
- A. MASTER
- B. STAGE
- C. SERVPROV
- D. GUEST
- E. BLUEPRINT
Answer: A
NEW QUESTION 52
At which three levels does Match Rules allow the Invoice Matching to occur? (Choose three.)
- A. Shipment Ship Unit level
- B. Shipment Ship Unit line level
- C. Order line level
- D. Shipment level
- E. Shipment location level
Answer: C,D,E
NEW QUESTION 53
......
Oracle 1Z0-1079-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 16 |
|
| Topic 17 |
|
How much Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam costs
- Types of questions: Performance-Based Questions
- Examination Name: Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam
- No. of Questions: 85 Questions
- Length of Exam: 85 min
- Examination Fees: USD 590
- Passing score: 60% or higher
Oracle 1Z0-1079-20 Actual Questions and Braindumps: https://www.free4torrent.com/1Z0-1079-20-braindumps-torrent.html