[2021] Free 1Z0-1079-20 Exam Dumps to Pass Exam Easily
1Z0-1079-20 Exam Dumps, 1Z0-1079-20 Practice Test Questions
How to book the Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam
You can schedule the exam anytime at Pearson VUE. You can pay directly from a credit card or redeem a voucher purchased from Oracle.
Certification Path of Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam
Oracle 1Z0-1079-20: Oracle SCM Transportation and Global Trade Management Cloud 2020 Implementation Essentials Exam is a fundamental exam. Successful completion by candidates will allow them to achieve Planning Cloud 2020 Certified Implementation Specialist status.
NEW QUESTION 20
Select the two true statements about OTM Agents. (Choose two.)
- A. Agents can send alerts when a condition has occurred, and they can also create or change data objects.
- B. Agents can send alerts when a condition has occurred, but they cannot create or change data objects.
- C. Agents can be configured to run multiple times on a time-based schedule.
- D. Agents "listen" for a condition to occur.
Answer: B,C
NEW QUESTION 21
By default, OTM installs some agents at the time of installation.
Identify two correct statements. (Choose two.)
- A. All agents are inactive. The Administrator or other authorized persons must review and activate those they want to run in their environment.
- B. All agents are active. The Administrator or other authorized persons must review and deactivate those they want to run in their environment.
- C. OTM will install agents into domains such as PUBLIC and SERVPROV.
- D. OTM will install agents into the designated "company" domain, but not into domains such as PUBLIC and SERVPROV.
- E. By default, some agents are active, while others are inactive. The Administrator or other authorized persons must review the agents and activate or deactivate appropriately.
Answer: A,C
NEW QUESTION 22
Identify the incorrect option about the commodity setup.
- A. You can select transportation modes while defining a commodity.
- B. You can link commodity with equipment types while defining a new commodity.
- C. Incompatible commodities can be captured while defining a commodity.
- D. Specific temperature controls cannot be assigned while defining a commodity.
Answer: D
NEW QUESTION 23
Which three options are available after a document has been assigned to a Customs transaction as a standard document? (Choose three.)
- A. Upload the document content.
- B. Generate the document content.
- C. View the document content.
- D. Validate the document content.
- E. Edit the document.
Answer: B,C,D
NEW QUESTION 24
At which three levels does Match Rules allow the Invoice Matching to occur? (Choose three.)
- A. Order line level
- B. Shipment Ship Unit line level
- C. Shipment location level
- D. Shipment Ship Unit level
- E. Shipment level
Answer: A,C,E
NEW QUESTION 25
Which output option from the below is available for exporting data using the CSV Export function?
- A. text editor programs such as Notepad
- B. a file on your database server
- C. MS Excel
- D. browser window
Answer: B
NEW QUESTION 26
How would you create an association in OTM if you want to associate a Match Rule to a specific Service Provider (carrier)?
- A. Create the Rule, then assign the Service Provider to the Rule.
- B. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Rule Profile to the Service Provider.
- C. Create the Rule, assign the Rule to an appropriate Rule Profile, then assign the Service Provider to the Rule Profile.
- D. Create the Rule, then assign the Rule to the Service Provider.
Answer: D
NEW QUESTION 27
Your client company has a few systems keeping the Item Master, and requests Global Trade Management (GTM) be flexible on Item creation.
Which three options are true about Item creation in GTM in this scenario? (Choose three.)
- A. Items can be downloaded from the External Content Provider.
- B. Items can be uploaded by the Product Classification Template in GTM.
- C. Items can be sent from an ERP system, such as Oracle ERP Cloud, to GTM.
- D. Items can be manually created in the GTM UI.
- E. Items can be uploaded by CSV in GTM.
Answer: A,D,E
NEW QUESTION 28
You have created the following Workflow Agent in your OTM test environment and you want to move it to your OTM production environment:
Agent Name: SHIPMENT NOTIFY
Event: LATE_SHIPMENT (New Custom Event)
Saved Condition: SHIPMENT IS INBOUND (New saved condition)
Actions:
IF SHIPMENT STATUS IS NOT CANCELLED (IF uses a new Saved Condition)
SET INTERNAL STATUS: ENROUTE_DELAYED ENDIF
Which Screen Set ID's do you have to use in your Migration Project?
- A. AGENT, AGENT_EVENT, SAVED_CONDITION_QUERY
- B. AGENT, CUSTOM_EVENT, SAVED_CONDITION, SAVED QUERY
- C. AGENT, EVENT, SAVED_CONDITION, SAVED QUERY
- D. AGENT, AGENT_EVENT, SAVED_CONDITION, SAVED QUERY
- E. AGENT, CUSTOM_EVENT, SAVED_CONDITION
Answer: E
NEW QUESTION 29
Which rate component defines how transportation time will be calculated for the Rate?
- A. Rate Lane
- B. Rate Distance
- C. Rate Service
- D. Rate Offering
- E. Rate Record
Answer: B
NEW QUESTION 30
Which two options must be defined for shipment planning? (Choose two.)
- A. Equipment
- B. Equipment Type
- C. Equipment Group
- D. Equipment Group Profile
- E. Equipment Class
Answer: A,B
NEW QUESTION 31
What is the difference between a BUY Shipment and a SELL Shipment?
- A. BUY Shipments are tendered to third party carriers, and SELL Shipments are tendered to a company's private Fleet.
- B. BUY Shipments are created by Planners in a Company domain for their own shipments, and SELL Shipments are created by Planners in a 3PL COMPANY domain for their clients' shipments.
- C. BUY Shipments are created for inbound (vendor Purchase Orders) shipments, and SELL Shipments are created for outbound (company Sales Orders) shipments.
- D. BUY Shipments are created when you wish to purchase services, and SELL Shipments are created when you wish to charge a customer for services.
Answer: B
NEW QUESTION 32
If a Rate Record and a Rate Offering are configured with conflicting values in the same data elements, how does OTM address this?
- A. During planning, the user will have the option of indicating if OTM should prioritize either the Rate Offering or the Rate Record setting.
- B. The Rate Offering will take priority over the Rate Record configuration.
- C. The Rate Record will take priority over the Rate Offering configuration.
- D. Such a conflict cannot exist in OTM.
- E. OTM's planning engine will run the solver for both settings, but only consider the least cost result.
Answer: D
NEW QUESTION 33
Which two statements are true about authority configuration in Global Trade Management (GTM)? (Choose two.)
- A. An authority has to be linked to a region by using region configuration.
- B. An authority has to be defined in the PUBLIC domain.
- C. Authorities are regulatory agencies, such as the US Bureau of Industry and Security.
- D. There can be only one authority defined for a domain in GTM.
- E. Authority configuration involves defining the Authority ID, Name, and Description.
Answer: C,E
NEW QUESTION 34
Identify the option which cannot be performed by the Screen Set Manager.
- A. Create multi-panel layouts containing tables, maps, Gantt charts.
- B. Define default criteria for search fields.
- C. Customize the Results page columns.
- D. Customize the Actions menu.
Answer: A
NEW QUESTION 35
View the exhibit.
Bob is a user in the "3PL COMPANY" domain and has been assigned the "Admin" User Role ID.
What must you do to make sure that Bob has the authority to view and plan all the orders from all the Client domains shown?
- A. Create a Role in each of the Client domains with the same name, and add Bob's user ID to the Role.
- B. Use OTM's VPD to assign Bob's user ID in each of the Client domains.
- C. Do nothing, because Bob will automatically be authorized to plan all of the orders.
- D. Use OTM's VPD to add Bob to the Planner Role in the 3PL COMPANY domain.
- E. Create a Role in the 3PL COMPANY domain that has at least "Default" authority, and use OTM's GRANTS to assign Bob's user ID in each of the Client domains.
Answer: E
NEW QUESTION 36
After executing the Approve Multiple Invoices function, Oracle Transportation Management displays an Approve Invoice results page.
Which four invoice values are displayed on this results page? (Choose four.)
- A. Voucher ID
- B. Shipment ID
- C. Service Provider ID
- D. Approval Status
- E. Invoice ID
- F. Amount to Pay
Answer: A,B,E,F
NEW QUESTION 37
Given the information:
Which two options are correct for Service Preference configuration? (Choose two.)
- A. It is not mandatory to specify Agency Code.
- B. At the most sixty-four words can be specified in Exclude Words.
- C. If the Data Version ID is not specified, then the system will throw an error during screening that Data Version ID needs to be specified.
- D. Exclude Words is used to specify words to exclude when ONLY "Dice" Match Engine is used.
- E. If the Data Version ID is not specified and if there is a Restricted Parties List with a Data Version with the "Current" flag set, it will be used for screening.
Answer: B,E
NEW QUESTION 38
In the process of "Adjust shipment cost scenario," you select "reversing and adjusting" Shipment cost.
What will be performed by OTM?
- A. The system reverses a cost by creating a new cost with a negative amount that matches the amount of the original cost.
- B. The system creates a new cost that negates the original cost. Then it creates another new cost with the new cost value.
- C. The system gives the user an option to update the amount.
- D. The system takes the original cost and adds or subtracts an amount to it to create the new cost.
Answer: A
NEW QUESTION 39
Which four of the following components make up a Compliance Rule in Global Trade Management (GTM)?
(Choose four.)
- A. Control Type
- B. Control Code
- C. Commerce Control List
- D. Regime
- E. Region
Answer: A,B,D,E
NEW QUESTION 40
Shipment# 10059 is a Multi-Stop shipment with two orders. Both orders are picked up in New York City. One of the orders is dropped off in Philadelphia, Pennsylvania, and the other order dropped off in Baltimore, Maryland. There is empty capacity on this shipment for you to add another order (# 1234), which is picking up in Philadelphia and dropping off in Baltimore. The status of Shipment# 10059 is "SECURE RESOURCES:
NOT_STARTED"
Which shipment planning option should you use to ensure that order release# 1234 is assigned to Shipment#
10059?
- A. Move Order to Existing Shipment
- B. Show Routing Options
- C. Manual
- D. Bulk Plan
Answer: B
NEW QUESTION 41
Which two statements are true with respect to userID and domain relationship, during a standard OTM installation? (Choose two.)
- A. The DEFAULT userID is created in the ADMIN domain.
- B. The ADMIN userID is created in the DBA domain.
- C. The ADMIN userID is created in the GUEST domain.
- D. The GUEST userID is created in the SERVPROV domain.
- E. The GUEST userID is created in the PUBLIC domain.
Answer: A,B
NEW QUESTION 42
......
1Z0-1079-20 Exam Dumps, 1Z0-1079-20 Practice Test Questions: https://www.free4torrent.com/1Z0-1079-20-braindumps-torrent.html