[Dec 23, 2023] Pass Your JN0-363 Dumps Free Latest Juniper Practice Tests
Get Top-Rated Juniper JN0-363 Exam Dumps Now
Juniper JN0-363 certification exam is designed to test the knowledge and skills of professionals in the field of service provider routing and switching. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification is intended for individuals who work with Juniper Networks technologies and products in service provider environments. JN0-363 exam is designed to assess a candidate's ability to configure and troubleshoot Juniper Networks routers and switches and to implement advanced routing and switching technologies.
Juniper JN0-363 Certification Exam is a specialist level exam that focuses on Service Provider Routing and Switching. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification is designed for professionals who have experience in network operations and maintenance, and who are responsible for managing Juniper Networks equipment in a service provider environment. JN0-363 exam is designed to test the knowledge and skills required to plan, configure, and verify the implementation of various routing and switching technologies in a service provider network.
Juniper JN0-363 (Service Provider Routing and Switching, Specialist (JNCIS-SP)) certification exam is designed for network professionals who want to validate their skills and knowledge in service provider routing and switching. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam is an advanced level exam that covers a wide range of topics related to routing and switching technologies.
NEW QUESTION # 86
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel up after the hold-time expires
- B. to mark the tunnel down after the hold-time expires
- C. to remove the tunnel interface from inet.0 after the hold-time expires
- D. to reduce the risk of forwarding traffic through a stateless tunnel
Answer: B,D
NEW QUESTION # 87
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers.Which three configuration elements are minimally required in the baseline? (Choose three.)
- A. protocols ldp for the appropriate interfaces
- B. protocols rsvp for the appropriate interfaces
- C. protocols mpls for the appropriate interfaces
- D. family mpls on the transit interfaces
- E. family mpls on the loopback interface
Answer: B,C,D
NEW QUESTION # 88
Exhibit
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?
- A. R1 needs to be configured with an explicit router ID.
- B. R1 and R2 must each have unique AS numbers.
- C. R1 does not have a route to 192.168.200.2.
- D. R1 needs to be configured with a next-hop self policy.
Answer: C
NEW QUESTION # 89
Click the exhibit.
A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A,D
NEW QUESTION # 90
The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?
- A. R4 -> R5 -> R6
- B. R4 -> R1 -> R2 -> R3 -> R6
- C. R4 -> R5 -> R2 -> R3 -> R6
- D. R4 -> R1 -> R2 -> R5 -> R6
Answer: D
NEW QUESTION # 91
Exhibit
Which two statements ate correct about the actions taken as the packet traverses the service provider MPLS network from Site 1 to Site 2 as shown in the exhibit? (Choose two.)
- A. R2 will perform a lookup using the inet.3 table.
- B. R2 will perform a lookup using the mpls.0 table.
- C. R1 will perform a lookup using the lnet.3 table.
- D. R1 will perform a lookup using the mpls.0 table.
Answer: B
NEW QUESTION # 92
Referring to the exhibit, which statement is correct?
- A. R1 will advertise only the 10.200.3.0/24 prefix to the 192.168.1.5 neighbor.
- B. R1 will advertise only the 10.200.1.0/24 prefix to the 192.168.1.5 neighbor.
- C. R1 will advertise only the 10.200.2.0/24 prefix to the 192.168.1.5 neighbor.
- D. R1 will advertise the 10.200.1.0/24, 10.200.2.0/24, and 10.200.3.0/24 prefixes to the 192.168.1.5 neighbor.
Answer: D
NEW QUESTION # 93
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. The OSPF version does not match on the configured interfaces.
- B. The router is not sending hellos on the configured interface.
- C. The area does not match on the configured interfaces.
- D. Router is not receiving hellos on the configured interface.
Answer: C
NEW QUESTION # 94
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)
- A. Hello interval
- B. Router priority
- C. Designated route
- D. Network mask
Answer: A,D
NEW QUESTION # 95
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It is loop free by default
- B. Neighbors can be located anywhere within the AS
- C. It does not support multihop
- D. Interface Lo0 must be used for peering
Answer: A,B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html
NEW QUESTION # 96
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
- A. Allows the destination host to re-order packets and increase performance.
- B. All physical links in the network are used equally.
- C. Packets arrive at the destination in the order they were sent.
- D. Provides easier implementation of class of service policies.
Answer: C,D
NEW QUESTION # 97
Which two statements are correct when using LDP? (Choose two.)
- A. LDP label-switched paths are created by configuring LDP on the loopbacK Interface.
- B. The lnet.3 table will contain only the paths explicitly defined.
- C. LDP label-switched paths are created by configuring LDP on at least one physical router interface.
- D. The inet.3 table will contain a full mesh of label-switched paths to other LDP-enabled routers.
Answer: A,D
NEW QUESTION # 98
Click the Exhibit.
Referring to the configuration shown in the exhibit, which statement is true?
- A. Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.
- B. Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3
- C. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.
- D. Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.
Answer: D
NEW QUESTION # 99
Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)
- A. You should configure the max period for NSR precision timers.
- B. You must configure graceful restart.
- C. You must configure GRES.
- D. You should configure commit synchronization.
Answer: A,C
NEW QUESTION # 100
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?
- A. The router with the highest numerical lo0 IP address will be elected as the DIS.
- B. The router with the highest MAC address will be elected as the DIS.
- C. The router with the lowest MAC address will be elected as the DIS.
- D. The router with the lowest numerical lo0 IP address will be elected as the DIS.
Answer: A
NEW QUESTION # 101
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The neighbor does not support IPv6
- B. The TCP session is not establishing
- C. The update messages contain an unsupported option
- D. The peer's AS number is misconfigured
Answer: D
NEW QUESTION # 102
What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)
- A. timing
- B. learning
- C. aging
- D. exporting
Answer: B,C
NEW QUESTION # 103
Which BGP attribute is used to detect routing loops?
- A. next hop
- B. local preference
- C. AS path
- D. MED
Answer: C
NEW QUESTION # 104
You have just configured IPv6 in your network. A packet arrives on your router that exceeds the MTU size. How will an IPv6 router respond?
- A. The packet is dropped.
- B. The packet is fragmented based on extension headers.
- C. The packet is kept intact and not fragmented.
- D. The fragment offset is referenced and the packet is fragmented.
Answer: A
NEW QUESTION # 105
You have created a routing instance named vr3 that will provide access to Server2 (10.0.0.2) for the hosts on the 10.10.10.0/24 network.
Which command would you use to test connectivity between vr3 and Server2?
- A. user@vr3> ping 10.0.0.2 count 5
- B. user@vr3> ping 10.0.0.2 count 5 source 10.10.10.1
- C. user@router1> ping 10.0.0.2 routing-instance vr3 count 5
- D. user@router1> ping 10.0.0.2 count 5
Answer: C
NEW QUESTION # 106
You have an established LSP between your R1 and R5 devices using the configuration shown in the exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the LSP.
Which action will accomplish this behavior?
- A. Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
- B. Delete the no-cspf statement under the R1_TO_R5 label switched path on R1.
- C. Configure the install statement under the R1_TO_R5 label switched path on R1.
- D. Configure the explicit-null statement under the protocol mpls hierarchy on R1.
Answer: C
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/ref/statement/install-edit-protocols-mpls.html
NEW QUESTION # 107
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
- A. AS1 is not allowing ES2 access to VLAN 300.
- B. ES1 is not advertising VLAN 300 to AS1.
- C. AS1's VLAN ID list is missing an entry for VLAN 300.
- D. ES2 is not interested in VLAN 300.
Answer: D
NEW QUESTION # 108
......
Passing Key To Getting JN0-363 Certified Exam Engine PDF: https://www.free4torrent.com/JN0-363-braindumps-torrent.html
JN0-363 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=16QsjFcoRGnTH_7srQAUOAsX26nuPRu2T