[Dec 30, 2021] Download Free Cisco 500-920 Real Exam Questions [Q21-Q46]

[Dec 30, 2021] Download Free Cisco 500-920 Real Exam Questions

Pass Your Exam With 100% Verified 500-920 Exam Questions

Cisco 500-920 Exam Syllabus Topics:

NEW QUESTION 21
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

• A. RAID Controllers
• B. Cisco Fabric Interconnects
• C. Cisco UCS Manager
• D. VIC Cards and Fiber Channel HBAs

Answer: B,D

NEW QUESTION 22
Which two interfaces allow access to Cisco UCS Manager? (Choose two )

• A. Cisco IMC
• B. Cisco UCS Manager GUI
• C. Cisco KVM
• D. Cisco UCS Manager XML API

Answer: B,D

NEW QUESTION 23
You are experiencing intermittent connectivity issues on one specific Cisco UCS server Some applications work, while other do not transfer data You suspect jumbo frames limitations Which two places do you check the jumbo frame settings? (Choose two )

• A. Check server's service profile and/or service profile template
• B. Check server's QoS System Class
• C. Check upstream switch ports frame size configuration
• D. Check server's individual vNICs and/or vHBAs properties
• E. Check the fibre channel port configuration for jumbo frame configuration

Answer: B,C

NEW QUESTION 24
Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?

• A. UCS C-series servers may be connected to multiple UCS Manager domains at the same time
• B. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)
• C. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later
• D. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model

Answer: C

NEW QUESTION 25
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?

• A. The server does not have a service profile assigned, but has been discovered by UCS Manager
• B. The server has been properly connected, but has not been discovered by UCS Manager
• C. The server is not properly connected
• D. The server has a service profile assigned, but has connectivity issues with UCS Manager

Answer: C

NEW QUESTION 26
What are three possible causes of service profile association failure due to iSCSI configuration issue? (Choose three )

• A. iSCSI Target out of configured range of services
• B. Inappropriate network configuration
• C. Misconfigured LUN. LUN masking
• D. Misconfigured iSCSI parameters
• E. Improperly assigned iSCSI Class of Service
• F. Wrong WWNN

Answer: A,B,D

NEW QUESTION 27
If a Cisco UCS B-Series server fails to initialize, which method of access is required to troubleshoot?

• A. Use direct console access to troubleshoot initialization
• B. Use KVM console to troubleshoot initialization
• C. Use Cisco UCS Manager GUI to troubleshoot initialization
• D. Use Cisco UCS Manager API to troubleshoot initialization

Answer: B

NEW QUESTION 28
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )

• A. Connect Fl-A to IOM A and IOM B in each chassis
• B. Connect Fl-B to the IOM A of each chassis
• C. Connect Fl-B to the IOM B of each chassis
• D. Connect Fl-B to IOM A and IOM B in each chassis
• E. Connect Fl-A to the IOM A of each chassis
• F. Connect Fl-A to the IOM B of each chassis

Answer: C,E,F

NEW QUESTION 29
Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?

• A. Direct Connect Port
• B. Server Port
• C. Service Profile Port
• D. Uplink Port

Answer: D

NEW QUESTION 30
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?

• A. VIF, UIF, HIF, SIR NIF
• B. HIF. SIF, VIF, UIF NIF
• C. VIF, UIF, HIF, NIF SIF
• D. HIF. NIF, UIF, VIF SIF

Answer: A

NEW QUESTION 31
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )

• A. Out-of-Band Access
• B. XML API Access
• C. SNMP
• D. In-band Access
• E. Web Access

Answer: B,D

NEW QUESTION 32
When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended'?

• A. Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported
• B. Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects
• C. Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects
• D. Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects
• E. Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects

Answer: E

NEW QUESTION 33
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )

• A. L1 > L1
• B. L2 > L2
• C. L1 > L2
• D. L2 > L1

Answer: A,B

NEW QUESTION 34
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?

• A. Cisco Finite State Machine
• B. Cisco Application Gateways
• C. Cisco Data Management Engine
• D. Cisco UCS Manager

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html

NEW QUESTION 35
What three options should be verified, when you are able to connect to Cisco UCS Manager, but unable to open a KVM session to a blade? (Choose three)

• A. Verify TCP port 2068 is not blocked by an ACL or Firewall
• B. Confirm the IP Address assigned to UCS Manager is the same as the KVM address
• C. Verify the KVM IP Address is on the same subnet as the Fabric Interconnect management address
• D. Confirm the IP Address assigned to the KVM is not a duplicate IP
• E. Confirm the KVM IP Address is added to the route table in Cisco UCS Manager
• F. Verify the KVM IP Address is on the same ip subnet as the virtual machines

Answer: A,D,E

NEW QUESTION 36
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?

• A. The Cisco UCS Manager will determine with Fabric Interconnect to reboot
• B. The subordinate Fabric Interconnect
• C. Both Fabric Interconnects must be rebooted simultaneously
• D. The primary Fabric Interconnect

Answer: D

NEW QUESTION 37
......

500-920 Dumps 100 Pass Guarantee With Latest Demo: https://www.free4torrent.com/500-920-braindumps-torrent.html