Get Fortinet NSE7_EFW-6.4 Dumps Questions Study Exam Guide Apr 14, 2023
NSE7_EFW-6.4 Premium Exam Engine - Download Free PDF Questions
Average Salary of Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certified Professional
It is important to understand the kind of salary you can expect from this kind of career path while looking for advancement and progress in the world of field engineers and Fortinet NSE certification. Salaries at Fortinet are expected to range from $65,000 to about $105,000, and the average salary is about $85,000 for a certified NSE engineer.
Of course, by ensuring that you do more to help you earn, and increasing your skills and qualifications, you can focus on trying to develop this. You can also go to the Field Engineer and see if they can help you increase your prospective earnings and obtain better positions.
NEW QUESTION 27
What is the diagnose test application ipsmonitor 99 command used for?
- A. To enable IPS bypass mode
- B. To disable the IPS engine
- C. To restart all IPS engines and monitors
- D. To provide information regarding IPS sessions
Answer: C
NEW QUESTION 28
View the exhibit, which contains the output of a debug command, and then answer the question below.
Which one of the following statements about this FortiGate is correct?
- A. It is currently in proxy conserve mode because of high memory usage.
- B. It is currently in system conserve mode because of high CPU usage.
- C. It is currently in extreme conserve mode because of high memory usage.
- D. It is currently in memory conserve mode because of high memory usage.
Answer: D
NEW QUESTION 29
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The CA cannot resolve the name of the workstation.
- B. The CA cannot reach the FortiGate with the IP address 192.168.12.232.
- C. The remote registry service is not running in the workstation 192.168.12.232.
- D. The FortiGate cannot resolve the name of the workstation.
Answer: C
NEW QUESTION 30
In which two states is a given session categorized as ephemeral? (Choose two.)
- A. A TCP session waiting for FIN ACK.
- B. A UDP session with packets sent and received.
- C. A UDP session with only one packet received.
- D. A TCP session waiting to complete the three-way handshake.
Answer: C,D
NEW QUESTION 31
Refer to the exhibit, which shows a FortiGate configuration.
An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however, the web filter is not inspecting any traffic that is passing through the policy.
What must the administrator change to fix the issue?
- A. The administrator must change protocol to TCP.
- B. The administrator must disable webfilter-force-off.
- C. The administrator must increase webfilter-timeout.
- D. The administrator must enable fortiguard-anycast.
Answer: D
NEW QUESTION 32
Viewthe exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. The web request was allowed by FortiGate.
- B. FortiGate found the requested URL in its local cache.
- C. This web request was inspected using the root web filter profile.
- D. The requested URL belongs to category ID 52.
Answer: B,D
NEW QUESTION 33
An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer.If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?
- A. diagnose sniffer packet any 'udp port 500'
- B. diagnose snifferpacket any 'esp'
- C. diagnose sniffer packet any 'udp port 4500'
- D. diagnose sniffer packet any 'udp port 500 or udp port 4500'
Answer: B
Explanation:
Explanation
Capture IKE Traffic without NAT:diagnose sniffer packet 'host and udp port 500'
--------------------------------------Capture ESP
Traffic without NAT:diagnose sniffer packet any 'host and esp'
--------------------------------------Capture IKE
and ESP with NAT-T:diagnose sniffer packet any 'host and (udp port 500 or udp port 4500)'
NEW QUESTION 34
Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id="xxxxxxx" log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg="NAT port is exhausted."
What does the log mean?
- A. The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.
- B. There is not enough available memory in the system to create a new entry in the NAT port table.
- C. The limit for the maximum number of entries in the NAT port table has been reached.
- D. FortiGate does not have any available NAT port for a new connection.
Answer: A
NEW QUESTION 35
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
- A. The remote gateway IP address is 10.0.0.1.
- B. It shows a phase 1 negotiation.
- C. The negotiation is using AES128 encryption with CBC hash.
- D. The initiator provided remote as its IPsec peer ID.
Answer: B,D
NEW QUESTION 36
What is the purpose of an internal segmentation firewall (ISFW)?
- A. It splits the network into multiple security segments to minimize the impact of breaches.
- B. It is anall-in-one security appliance that is placed at remote sites to extend the enterprise network.
- C. It inspects incoming traffic to protect services in the corporate DMZ.
- D. It is the first line of defense at the network perimeter.
Answer: A
Explanation:
Explanation
ISFW splits your network into multiple security segments. They serve as a breach containers from attacks that come from inside.
NEW QUESTION 37
Which of the following statements are true regardingthe SIP session helper and the SIP application layer gateway (ALG)? (Choose three.)
- A. SIP ALG supports SIP HA failover; SIP helper does not.
- B. SIP ALG supports SIP over IPv6; SIP helper does not.
- C. SIP ALG can create expected sessions for media traffic; SIP helper does not.
- D. SIP helper supports SIP over TCP and UDP; SIP ALG supports only SIP over UDP.
- E. SIP session helper runs in the kernel; SIP ALG runs as a user space process.
Answer: A,B,C
NEW QUESTION 38
View the central management configuration shown in the exhibit, and then answer the question below.
Which server will FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.244
- B. 10.0.1.242
- C. One of the public FortiGuard distribution servers
- D. 10.0.1.240
Answer: C
NEW QUESTION 39
View the exhibit, which contains the output of a diagnose command, and the answer the question below.
Which statements are true regarding the Weight value?
- A. Its initial value is statically set to 10.
- B. Its initial value is calculated based on the round trip delay (RTT).
- C. Its value is incremented with each packet lost.
- D. It determines which FortiGuard server is used for license validation.
Answer: C
NEW QUESTION 40
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
What statements are correct regarding the output? (Choose two.)
- A. This is an expected session created by an application control profile.
- B. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.
- C. This is anexpected session created by a session helper.
- D. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.
Answer: C,D
NEW QUESTION 41
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
The administrator does not have access to the remote gateway. Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. Change phase 1 encryption to AES256 and authentication to SHA256.
- B. Change phase 1 encryption to AES128 and authentication to SHA512.
- C. Change phase 1 encryption to 3DES and authentication to SHA128.
- D. Change phase 1 encryption to AESCBC and authentication to SHA2.
Answer: A
NEW QUESTION 42
View the exhibit, which contains the partial output of adiagnose command, and then answer the question below.
Based on the output, which of the following statements is correct?
- A. Quick mode selectors are disabled.
- B. Anti-reply is enabled.
- C. DPD is disabled.
- D. Remote gateway IP is 10.200.5.1.
Answer: B
NEW QUESTION 43
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in FD conserve mode.
- B. It is currently in system conserve mode because of high CPU usage.
- C. It is currently in system conserve mode because of high memory usage.
- D. It is currently in kernel conserve mode because of high memory usage.
Answer: C
NEW QUESTION 44
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script on FortiManager, but the TCL script failed to apply any changes to the managed device after being run.
Why did the TCL script fail to make any changes to the managed device?
- A. Changes to an interface configuration can be made only by a CLI script.
- B. The TCL script must start with tinclude <>.
- C. The TCL command run_cmd has not been created.
- D. Incomplete commands are ignored in TCL scripts.
Answer: C
NEW QUESTION 45
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn't the tunnel come up?
- A. The remote gateway's phase 1 configuration does not match the local gateway's phase 1 configuration.
- B. The remote gateway's phase 2configuration does not match the local gateway's phase 2 configuration.
- C. The pre-shared keys do not match.
- D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.
Answer: A
NEW QUESTION 46
View the exhibit, which contains an entry in the session table, and then answer the question below.
Which one of the following statements is true regarding FortiGate's inspection of this session?
- A. FortiGate applied explicit proxy-based inspection.
- B. FortiGate applied proxy-based inspection.
- C. FortiGate applied flow-based inspection.
- D. FortiGate forwarded this session without any inspection.
Answer: B
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
NEW QUESTION 47
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The CA cannot resolve the name of the workstation.
- B. The CA cannot reach the FortiGate with the IP address 192.168.12.232.
- C. The remote registry service is not running in the workstation 192.168.12.232.
- D. The FortiGate cannot resolve the name of the workstation.
Answer: C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548
NEW QUESTION 48
Which of the following conditions must be met for a static route to be active in the routing table? (Choose three.)
- A. The next-hop IP address is up.
- B. There is no other route, to the same destination, with a higher distance.
- C. The outgoing interface is up.
- D. The link health monitor (if configured) is up.
- E. The next-hop IP address belongs to one of the outgoing interface subnets.
Answer: C,D,E
Explanation:
A configured static route only goes to routing table from routing database when all the following are met :
The outgoing interface is up
There is no other matching route with a lower distance
The link health monitor (if configured) is successful
The next-hop IP address belongs to one of the outgoing interface subnets
NEW QUESTION 49
An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. CLI scripts will add objects only if they are referenced by policies.
- B. Incomplete commands are ignored in CLI scripts.
- C. Static routes can only be added using TCL scripts.
- D. Commands that start with the # sign are not executed.
Answer: D
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm#Error_Messages
A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.
NEW QUESTION 50
Examine the output of the 'get router info ospf interface' command shown in the exhibit; then answer the question below.
Which statements are true regarding the above output? (Choose two.)
- A. The port4 interface is connected to the OSPF backbone area.
- B. The local FortiGate has been elected as the OSPF backup designated router.
- C. Two OSPF routers are down in the port4 network.
- D. There are at least 5 OSPF routers connected to the port4 network.
Answer: A,D
Explanation:
on BROADCAST network there are 4 neighbors, among which 1*DR +1*BDR. So our FG has 4 neighbors, but create adjacency only with 2 (with DR and BDR). 2 neighbors DRother (not down).
NEW QUESTION 51
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device. The administrator decides to enable the setting link-failed-signal to fix the problem.
Which statement about this setting is true?
- A. It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- B. It forces the former primary device to shut down all its non-heartbeat interfaces for one second, while the failover occurs.
- C. It sends a link failed signal to all connected devices.
- D. It disabled all the non-heartbeat interfaces in all HA members for two seconds after a failover.
Answer: B
NEW QUESTION 52
......
Free NSE7_EFW-6.4 Exam Braindumps Fortinet Pratice Exam: https://www.free4torrent.com/NSE7_EFW-6.4-braindumps-torrent.html
Instant Download NSE7_EFW-6.4 Free Updated Test Dumps: https://drive.google.com/open?id=1d4Eo6gxGH7b1zFhXaCsqDD33xV9vfPfs