Grab latest RedHat EX200 Dumps as PDF Updated on 2024
Newly Released EX200 Dumps for RHCSA Certified
The RHCSA certification is highly respected in the IT industry and is recognized by top companies and organizations worldwide. It is a testament to a candidate's knowledge, skills, and ability to manage and administer Red Hat Enterprise Linux systems. In addition, the certification program is constantly updated to keep up with current industry trends and practices, ensuring that certified professionals remain up-to-date with the latest technologies and best practices in the field of system administration.
NEW QUESTION # 12
Add a new logical partition having size 100MB and create the data which will be the mount point for the new partition.
Answer:
Explanation:
see explanation below.
Explanation
1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data
NEW QUESTION # 13
SIMULATION
In the system, mounted the iso image /root/examine.iso to/mnt/iso directory. And enable automatically mount (permanent mount) after restart system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
/etc/fstab:
/root/examine.iso /mnt/iso iso9660 loop 0 0 mount -a
mount | grep examine
NEW QUESTION # 14
Part 2 (on Node2 Server)
Task 6 [Implementing Advanced Storage Features]
Add a new disk to your virtual machine with a ize of 10 GiB
On this disk, create a VDO volume with a size of 50 GiB and mount it persistently on /vbread with xfs filesystem
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# yum install kmod-kvdo vdo
[root@node2 ~]# systemctl enable --now vdo
[root@node2 ~]# systemctl start vdo
[root@node2 ~]# systemctl status vdo
[root@node2 ~]# vdo create --name=vdo1 --device=/dev/vde --vdoLogicalSize=50G
[root@node2 ~]# vdostats --hu
Device Size Used Available Use% Space saving%
/dev/mapper/vdo1 10.0G 4.0G 6.0G 40% N/A
[root@node2 ~]# mkfs.xfs -K /dev/mapper/vdo1
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vde 252:64 0 10G 0 disk
└─vdo1 253:4 0 50G 0 vdo
[root@node2 ~]# mkdir /vbread
[root@node2 ~]# blkid
/dev/mapper/vdo1: UUID="1ec7a341-6051-4aed-8a2c-4d2d61833227" BLOCK_SIZE="4096" TYPE="xfs"
[root@node2 ~]# vim /etc/fstab
UUID=1ec7a341-6051-4aed-8a2c-4d2d61833227 /vbread xfs defaults,x-systemd.requires=vdo.service 0 0
[root@node2 ~]# mount /dev/mapper/vdo1 /vbread/
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vdo1 xfs 50G 390M 50G 1% /vbread
NEW QUESTION # 15
Part 2 (on Node2 Server)
Task 4 [Managing Logical Volumes]
Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz (Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
└─vdb1 252:17 0 4.2G 0 part
└─vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
└─vdc1 252:33 0 4.4G 0 part
└─datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvrz vgrz -wi-ao---- 4.10g
[root@node2 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vgrz 1 1 0 wz--n- <4.15g 48.00m
[root@node2 ~]# parted /dev/vdb print
Number Start End Size Type File system Flags
1 1049kB 4456MB 4455MB primary lvm
* [root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.0G 17M 3.8G 1% /datarz
[root@node2 ~]# parted /dev/vdb mkpart primary 4456MiB 5100MiB
[root@node2 ~]# parted /dev/vdb set 2 lvm on
[root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdb2
Physical volume "/dev/vdb2" successfully created.
* [root@node2 ~]# vgextend vgrz /dev/vdb2
Volume group "vgrz" successfully extended
[root@node2 ~]# lvextend -r -L 4600M /dev/vgrz/lvrz
Size of logical volume vgrz/lvrz changed from 4.10 GiB (1050 extents) to 4.49 GiB (1150 extents).
Logical volume vgrz/lvrz successfully resized.
[root@node2 ~]# resize2fs /dev/vgrz/lvrz
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.4G 17M 4.2G 1% /datarz
NEW QUESTION # 16
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /dat a. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.
Answer:
Explanation:
Create a partition having size 5 GB and change the syste id '8e'.
use partprobe command
pvcreate /dev/hda9 Suppose your partition number is hda9.
vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
lvextend -L+5120M /dev/test0/lvtestvolume
verify using lvdisplay /dev/test0/lvtestvolume.
NEW QUESTION # 17
SIMULATION
Open kmcrl value of 5 , and can verify in /proc/ cmdline
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
# vim /boot/grub/grub.conf
kernel/vmlinuz-2.6.32-71.el6.x86_64 ro root=/dev/mapper/GLSvg-GLSrootrd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswaprd_NO_LUKSrd_NO_MDrd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet kmcrl=5 Restart to take effect and verification:
# cat /proc/cmdline
ro root=/dev/mapper/GLSvg-GLSroot rd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet kmcrl=5
NEW QUESTION # 18
Configure your NFS services. Share the directory by the NFS Shared services.
Answer:
Explanation:
see explanation below.
Explanation
/etc/init.d/rpcbind start
/etc/init.d/nfslock start
/etc/init.d/nfs start
chkconfig rpcbind on
chkconfig nfslock on
chkconfig nfs on
showmount -e localhost
NEW QUESTION # 19
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
see explanation below.
Explanation
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION # 20
Find the rows that contain abcde from file /etc/testfile, and write it to the file/tmp/testfile, and the sequence is requested as the same as /etc/testfile.
Answer:
Explanation:
# cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile
NEW QUESTION # 21
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser, natasha, harry, and sarah should all have the password of redhat.
Answer:
Explanation:
see explanation below.
Explanation
* groupadd sysmgrs
* useradd -G sysmgrs Natasha
* We can verify the newly created user by cat /etc/passwd)
# useradd -G sysmgrs harry
# useradd -s /sbin/nologin sarrh
# passwd Natasha
# passwd harry
# passwd sarrah
NEW QUESTION # 22
An Ansible variable file contains the following content:
myapp:
option1: one
Which of the following strings can be used to reference the defined variable? (Choose two correct answers).
- A. option1@myapp
- B. myapp(option1);
- C. myapp{{option1}}
- D. myapp.option1
- E. myapp['option1']
Answer: B,C
NEW QUESTION # 23
CORRECT TEXT
Add admin group and set gid=600
Answer:
Explanation:
# groupadd -g 600 admin
NEW QUESTION # 24
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
Answer:
Explanation:
vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart
2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
ifdown eth0
ifup eth0
NEW QUESTION # 25
Configure the verification mode of your host account and the password as LDAP. And it can login successfully through ldapuser40. The password is set as "password". And the certificate can be downloaded from http://ip/dir/ldap.crt. After the user logs on the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP) OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION # 26
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser, natasha, harry, and sarah should all have the password of redhat.
Answer:
Explanation:
groupadd sysmgrs
useradd -G sysmgrs Natasha
We can verify the newly created user by cat /etc/passwd)
# useradd -G sysmgrs harry
# useradd -s /sbin/nologin sarrh
# passwd Natasha
# passwd harry
# passwd sarrah
NEW QUESTION # 27
Which section of the Prometheus configuration defines which nodes are monitored?
- A. rules
- B. listener
- C. targets
- D. scrape_config
- E. nodes
Answer: D
Explanation:
Explanation/Reference: https://prometheus.io/docs/prometheus/latest/getting_star
NEW QUESTION # 28
......
RedHat EX200 exam is a hands-on exam that tests the candidate's practical skills in managing Linux systems. EX200 exam is conducted in a live environment where the candidate is required to perform various tasks on a virtual machine running Red Hat Enterprise Linux. EX200 exam comprises of various modules that cover different aspects of Linux system administration, including user management, file system management, network configuration, package management, and security management.
To be eligible to take the RedHat EX200 exam, candidates must have a solid understanding of Linux fundamentals, including basic command-line skills, file management, and system administration. Candidates should also have experience working with Red Hat Enterprise Linux systems and be familiar with the tools and technologies used to manage them.
Latest EX200 Exam Dumps RedHat Exam from Training: https://www.free4torrent.com/EX200-braindumps-torrent.html
Updated Verified EX200 dumps Q&As - 100% Pass: https://drive.google.com/open?id=1tX6NmXpaRtMQ6N6JF3LhFuNp5qosN7Zc