Apr-2024 Realistic EX200 Accurate & Verified Answers As Experienced in the Actual Test!
Latest RedHat EX200 Practice Test Questions, Red Hat Certified System Administrator - RHCSA Exam Dumps
Digital Format of Red Hat Certified Engineer (EX200) Exam
Red Hat Certified Engineer (EX200) certification verifies the candidate's skills in management and administration of Red Hat Enterprise Linux systems. Relevant courseware: Red Hat Enterprise Linux 7: System Administration. Engine & Engineered to take and pass. Binary format, Available at most retailers that sell books, or directly from Amazon. Context-based questions appear during the exam based on the candidate's performance in each section. Thomas Red Hat offers free training videos to enhance your learning. Open book, closed book. Preview the course content before you take the certification exam. Rare and valuable opportunities. Self-paced and expertly led. Digital format. Multiple formats available for this course: On-demand video, online audio, or downloadable audio that helps you keep your progress even when you're not online. Each section has timed questions and practice exams with detailed explanations. Reach for the stars! The goal is to help you be 100% prepared. Android app. Supported training environments are listed in the exam overview. Even if you have no prior experience with Linux systems administration, the Red Hat Certified Engineer (EX200) certification training course is an excellent way to begin your career in this exciting field.
NEW QUESTION # 71
There is a local logical volumes in your system, named with shrink and belong to VGSRV volume group, mount to the /shrink directory. The definition of size is 320 MB.
Requirement:
Reduce the logical volume to 220 MB without any loss of data. The size is allowed between 200-260 MB after reducing.
Answer:
Explanation:
see explanation below.
Explanation
cd;umount /shrink
e2fsck -f /dev/mapper/vgsrv-shrink
resize2fs /dev/mapper/vgsrv-shrink 220M
lvreduce -L 220M /dev/mapper/vgsrv-shrink
mount -a
NEW QUESTION # 72
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24 Network. One RHEL6 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
Explanation:
vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.
NEW QUESTION # 73
SIMULATION
Add a swap partition.
Adding an extra 500M swap partition to your system, this swap partition should mount automatically when the system starts up. Don't remove and modify the existing swap partitions on your system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
fdisk -cu /dev/vda// in the way of expanding the partition, don't make main partition partx -a /dev/vda mkswap /dev/vdax swapon /dev/vdax swapon -s vi /etc/fstab
/dev/vdaxswapswapdefaults0 0
mount -a
NEW QUESTION # 74
What must be the first line of a plain text user-data configuration containing YAML configuration for cloud-init?
- A. cloud-config:
- B. #cloud-config
- C. #!/usr/bin/cloud-init
- D. [cloud-config]
- E. --- cloud-config
Answer: B
Explanation:
Explanation/Reference:
Reference https://cloudinit.readthedocs.io/en/latest/topics/examples.html
NEW QUESTION # 75
Part 2 (on Node2 Server)
Task 4 [Managing Logical Volumes]
Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz (Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
└─vdb1 252:17 0 4.2G 0 part
└─vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
└─vdc1 252:33 0 4.4G 0 part
└─datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvrz vgrz -wi-ao---- 4.10g
[root@node2 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vgrz 1 1 0 wz--n- <4.15g 48.00m
[root@node2 ~]# parted /dev/vdb print
Number Start End Size Type File system Flags
1 1049kB 4456MB 4455MB primary lvm
* [root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.0G 17M 3.8G 1% /datarz
[root@node2 ~]# parted /dev/vdb mkpart primary 4456MiB 5100MiB
[root@node2 ~]# parted /dev/vdb set 2 lvm on
[root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdb2
Physical volume "/dev/vdb2" successfully created.
* [root@node2 ~]# vgextend vgrz /dev/vdb2
Volume group "vgrz" successfully extended
[root@node2 ~]# lvextend -r -L 4600M /dev/vgrz/lvrz
Size of logical volume vgrz/lvrz changed from 4.10 GiB (1050 extents) to 4.49 GiB (1150 extents).
Logical volume vgrz/lvrz successfully resized.
[root@node2 ~]# resize2fs /dev/vgrz/lvrz
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.4G 17M 4.2G 1% /datarz
NEW QUESTION # 76
Which of the following Ansible tasks copies the file example.txtto a manage system?
- rsync:
- A. src: example.txt
dest: /tmp/example.txt
- cp: - B. src: example.txt
dest: /tmp/example.txt - C. source: example.txt
dst: /tmp/example.txt
- transfer: - D. src: example.txt
dest: /tmp/example.txt
- retrieve: - E. src: example.txt
dst: /tmp/example.txt
- copy:
Answer: D
NEW QUESTION # 77
Create a volume group, and set 8M as a extends. Divided a volume group containing 50 extends on volume group lv (lvshare), make it as ext4 file system, and mounted automatically under /mnt/data. And the size of the floating range should set between 380M and 400M.
Answer:
Explanation:
see explanation below.
Explanation
# fdisk
# partprobe
# pvcreate /dev/vda6
# vgcreate -s 8M vg1 /dev/vda6 -s
# lvcreate -n lvshare -l 50 vg1 -l
# mkfs.ext4 /dev/vg1/lvshare
# mkdir -p /mnt/data
# vim /etc/fstab
/dev/vg1/lvshare /mnt/data ext4 defaults 0 0
# mount -a
# df -h
NEW QUESTION # 78
CORRECT TEXT
Configure the verification mode of your host account and the password as LDAP. And it can ldapuser40. The password is set as "password". And the certificate login successfully through
can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP)
OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA
Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION # 79
Install the Kernel Upgrade.
Install suitable kernel update from:
http://server.domain11.example.com/pub/updates.
Following requirements must be met:
Updated kernel used as the default kernel of system start-up.
The original kernel is still valid and can be guided when system starts up.
Answer:
Explanation:
see explanation below.
Explanation
Using the browser open the URL in the question, download kernel file to root or home directory.
uname -r// check the current kernel version
rpm -ivh kernel-*.rpm
vi /boot/grub.conf// check
Some questions are: Install and upgrade the kernel as required. To ensure that grub2 is the default item for startup.
Yum
repo : http://content.example.com/rhel7.0/x86-64/errata
OR
uname -r // check kernel
Yum-config-manager
--add-repo="http://content.example.com/rhel7.0/x86-64/ errata"
Yum clean all
Yum list kernel// install directly
Yum -y install kernel// stuck with it, do not pipe! Please do not pipe!
Default enable new kernel grub2-editenv list// check
Modify grub2-set-default "kernel full name"
Grub2-mkconfig -o/boot/grub2/grub.cfg// Refresh
NEW QUESTION # 80
Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.
Answer:
Explanation:
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION # 81
Part 1 (on Node1 Server)
Task 10 [Configuring NTP/Time Synchronization]
Configure your system so that it is an NTP client of utility.domain15.example.com The system time should be set to your (or nearest to you) timezone and ensure NTP sync is configured
Answer:
Explanation:
* [root@node1 ~]# yum install chrony
[root@node1 ~]# vim /etc/chrony.conf
pool utility.domain15.example.com iburst
[root@node1 ~]# systemctl enable chronyd
[root@node1 ~]# systemctl restart chronyd
[root@node1 ~]# systemctl status chronyd
[root@node1 ~]# tzselect
Please identify a location so that time zone rules can be set correctly.
Please select a continent, ocean, "coord", or "TZ".
1) Africa
2) Americas
3) Antarctica
4) Asia
11) TZ - I want to specify the time zone using the Posix TZ format.
#? 4
* Please select a country whose clocks agree with yours.
1) Afghanistan 18) Israel 35) Palestine
2) Armenia 19) Japan 36) Philippines
3) Azerbaijan 20) Jordan 37) Qatar
4) Bahrain 21) Kazakhstan 38) Russia
5) Bangladesh 22) Korea (North) 39) Saudi Arabia
#? 5
The following information has been given:
Bangladesh
Therefore TZ='Asia/Dhaka' will be used.
Is the above information OK?
1) Yes
2) No
#? 1
Asia/Dhaka
[root@node1 ~]# chronyc sources -v
^? utility.domain15.example> 0 7 0 - +0ns[ +0ns] +/- 0ns
NEW QUESTION # 82
Add a new logical partition having size 100MB and create the data which will be the mount point for the new partition.
Answer:
Explanation:
1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data
NEW QUESTION # 83
Create a new logical volume according to the following requirements:
The logical volume is named database and belongs to the datastore volume group and has a size of 50 extents.
Logical volumes in the datastore volume group should have an extent size of 16 MB.
Format the new logical volume with a ext3 filesystem.
The logical volume should be automatically mounted under /mnt/database at system boot time.
Answer:
Explanation:
see explanation below.
Explanation
fdisk -cu /dev/vda
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate-l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
NEW QUESTION # 84
SIMULATION
Download the document from ftp://instructor.example.com/pub/testfile, find all lines containing [abcde] and redirect to /MNT/answer document, then rearrange the order according the original content.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: Download the file to /tmp first
grep [abcde] /tmp/testfile > /mnt/answer
NEW QUESTION # 85
Search files.
Find out files owned by jack, and copy them to directory /root/findresults
Answer:
Explanation:
see explanation below.
Explanation
mkdir/root/findfiles
find / -user jack -exec cp -a {} /root/findfiles/ \; ls /root/findresults
NEW QUESTION # 86
One Logical Volume named /dev/test0/testvolume1 is created. The initial Size of that disk is 100MB now you required more 200MB. Increase the size of Logical Volume, size should be increase on online.
Answer:
Explanation:
see explanation below.
Explanation
* lvextend -L+200M /dev/test0/testvolume1 Use lvdisplay /dev/test0/testvolume1)
* ext2online -d /dev/test0/testvolume1
lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.
NEW QUESTION # 87
CORRECT TEXT
Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.
Answer:
Explanation:
# pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NEW QUESTION # 88
SIMULATION
Copy /etc/fstab document to /var/TMP directory. According the following requirements to configure the permission of this document.
The owner of this document must be root.
This document belongs to root group.
User mary have read and write permissions for this document.
User alice have read and execute permissions for this document.
Create user named bob, set uid is 1000. Bob have read and write permissions for this document.
All users has read permission for this document in the system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: cp /etc/fstab /var/tmp
chown root:root /var/tmp/fstab
chmod a-x /var/tmp/fstab
setfacl -m u:mary:rw /var/tmp/fstab
setfacl -m u:alice:rx /var/tmp/fstab
useradd -u 1000 bob
NEW QUESTION # 89
Part 1 (on Node1 Server)
Task 6 [Accessing Linux File Systems]
Find all lines in the file /usr/share/mime/packages/freedesktop.org.xml that contain the string ich.
Put a copy of these lines in the original order in the file /root/lines.
/root/lines should contain no empty lines and all lines must be exact copies of the original lines in
/usr/share/mime/packages/freedesktop.org.xml
Answer:
Explanation:
* [root@node1 ~]# cat /usr/share/mime/packages/freedesktop.org.xml | grep ich > /root/lines
[root@node1 ~]# cat /root/lines
<comment xml:lang="ast">Ficheru codificau en BinHex de Machintosh</comment>
<comment xml:lang="fr">fichier code Macintosh BinHex</comment>
<comment xml:lang="gl">ficheiro de Macintosh codificado con BinHex</comment>
<comment xml:lang="oc">fichier encodat Macintosh BinHex</comment>
<comment xml:lang="pt">ficheiro codificado em BinHex de Macintosh</comment>
<comment xml:lang="fr">fichier boite aux lettres</comment>
NEW QUESTION # 90
Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.
Answer:
Explanation:
see explanation below.
Explanation
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION # 91
Create one partitions having size 100MB and mount it on data.
Answer:
Explanation:
1. Use fdisk /dev/hda to create new partition.
2. Type n For New partitions.
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
mke2fs -j /dev/hda? To create ext3 filesystem.
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Verify by mounting on current Sessions also: mount /dev/hda? /data
NEW QUESTION # 92
Part 1 (on Node1 Server)
Task 9 [Managing Files from the Command Line]
Search the string nologin in the /etc/passwd file and save the output in /root/strings
Answer:
Explanation:
* [root@node1 ~]# cat /etc/passwd | grep nologin > /root/strings
[root@node1 ~]# cat /root/strings
bin:x:1:1:bin:/bin:/sbin/nologin
daemon:x:2:2:daemon:/sbin:/sbin/nologin
adm:x:3:4:adm:/var/adm:/sbin/nologin
lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin
mail:x:8:12:mail:/var/spool/mail:/sbin/nologin
NEW QUESTION # 93
Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.
Answer:
Explanation:
# yum install -y httpd
# chkconfig httpd on
# cd /var/www/html
# wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
NEW QUESTION # 94
SIMULATION
Configure NTP.
Configure NTP service, Synchronize the server time, NTP server: classroom.example.com
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: Configure the client:
Yum -y install chrony
Vim /etc/chrony.conf
Add: server classroom.example.com iburst
Start: systemctl enable chronyd
systemctl restart chronyd
Validate: timedatectl status
NEW QUESTION # 95
Find all lines in the file /usr/share/dict/words that contain the string seismic. Put a copy of all these lines in their original order in the file /root/wordlist. /root/wordlist should contain no empty lines and all lines must be exact copies of the original lines in /usr/share/dict/words.
Answer:
Explanation:
see explanation below.
Explanation
grep seismic /usr/share/dict/words> /root/wordlist
NEW QUESTION # 96
......
Free EX200 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.free4torrent.com/EX200-braindumps-torrent.html
Apr-2024 Pass RedHat EX200 Exam in First Attempt Easily: https://drive.google.com/open?id=1-tkAgPvtHb2AZVo3l9qS-YbWZrSxvtRi