Most UptoDate Network Appliance NS0-194 Exam Dumps PDF 2022 [Q17-Q32]

Most UptoDate Network Appliance NS0-194 Exam Dumps PDF 2022

100% Free Network Appliance NCSE NS0-194 Dumps PDF Demo Cert Guide Cover

NetApp NS0-194 Exam Certification Details:

NEW QUESTION 17
While troubleshooting intermittent takeover impossible command entries on the console, you request the output of the storage failover interconnect statistics error show command.
Which two counters would help troubleshoot this problem? (Choose two.)

• A. sent queue length counter
• B. link error recovery counter
• C. avg peer connection time
• D. peer connections lost

Answer: A,B

NEW QUESTION 18
Exhibit:

A customer receives the AutoSupport message shown below.
''(?] Sat Aug 23 13:00:27 PDT [hostname: env_rngr: callhome.c.fan.fru.fault:error] :
Call home for CHASSIS FAN FRU FAILED: SysFan3 F2 (?] Sat Aug 23 13:00:32
PDT [hostname: env_mgr: monitor.chassisFan.ok:notice]: Chassis fan Sysfan3 F2 is ok"
The output of the sysconfig -a command is shown in the exhibit.
In this scenario, what would you do to solve this problem?

• A. Update Data ONTAP to 8.1.4 at the latest patch level.
• B. Disconnect the controller from the mains, wait two minutes, and re-connect it in the next maintenance window.
• C. Replace the fan.
• D. Update the Service Processor firmware.

Answer: A

NEW QUESTION 19
Which NetApp technology enables you to perform block-based replication from NetApp Element software to Cloud Volumes ONTAP?

• A. SnapMirror
• B. SyncMirror
• C. MetroCluster
• D. Cloud Sync

Answer: A

NEW QUESTION 20
You are on site to replace an I/O expansion module (IOXM) in a FAS6280 system. After replacement of the IOXM, you verify if the disks in the system are visible. You find that none of the cards in slots 7-13 are reporting.
In this scenario, which step did you forget when replacing the IOXM?

• A. Shut down the power of the chassis.
• B. Reseat the IOXM after initial replacement.
• C. Boot into diagnostics to verify the IOXM.
• D. Reassign all cards in the IOXM to the controller.

Answer: C

NEW QUESTION 21
Exhibit:

Your customer has recently migrated from their FAS3140 system running Data ONTAP 7.3.7 to a FAS2552 system running Data ONTAP 8.2.3 7-Mode through the head upgrade process.
They are no longer receiving the weekly AutoSupport notifications and want to know why. The exhibit shows the AutoSupport options from the nodes that have the same settings.
In this scenario, which solution is correct?

• A. There is no reason on the FAS2552 side why the customer should not receive the AutoSupport notifications. They should investigate their mail server to troubleshoot this issue.
• B. In Data ONTAP 8.2, weekly AutoSupport notifications are no longer sent to all recipients to reduce the mail load. The customer should add their e-mail address to the autosupport. partner. to option.
• C. In Data ONTAP 8.2, weekly AutoSupport notifications are no longer sent to the autosupport.to recipient, but only to autosupport.partner.to and to autosupport.support.to. The customer needs to add their e-mail address to one of these options.
• D. In Data ONTAP 8.2, the protocol for AutoSupport is changed to HTTPS by default, so the customer must have an HTTPS destination for the AutoSupport data.

Answer: C

NEW QUESTION 22
You have a 4-node MetroCluster configuration. The systems are operating normally with no faults.
In this scenario, which statement describes the usage of NVRAM when a host sends a write to a node?

• A. Incoming writes are written to the receiving node's NVRAM and its DR partner's NVRAM only.
• B. Incoming writes are written to the all four nodes' NVRAM.
• C. Incoming writes are written to the receiving node's NVRAM and its HA partner's NVRAM only.
• D. Incoming writes are written to the receiving node's NVRAM, its HA partner's NVRAM, and its DR partner's NVRAMonly.

Answer: A

NEW QUESTION 23
An administrator notices that the clustered Data ONTAP 8.2.3 controllers are less responsive than normal. You use On Command Performance Manager but do not see obvious problems, yet, this particular issue is constant. Users are starting to complain.
Which tool would you use to collect data to help diagnose this issue?

• A. Auto Support
• B. Performance Archive
• C. Perfstat
• D. Perfmon

Answer: D

NEW QUESTION 24
Click the Exhibit button at the right.
Your customer receives errors that a SyncMirror plex failed on their 4-node Fabric MetroCluster system. You verify that the other plexes are online and notice that no errors have occurred within the past year.

Referring to the exhibit, which troubleshooting step would you perform in this scenario?

• A. Review all SAS connections.
• B. Review the fabric switches, and ATTO bridges for errors.
• C. Review if a site switchover has occurred.
• D. Review that all Inter-Switch Links (ISL) are online.

Answer: B

NEW QUESTION 25
A manager wants a volume to have a guaranteed 300 MB/s of read performance. You explain that you cannot do this on FAS storage running ONTAP 9.3 backed by 10,000 RPM disks.
What is the reason for this response?

• A. Throughput floors required a license
• B. Throughput floor apply to only ISCSI access.
• C. Throughput floors required AFF.
• D. Throughput floors can only guarantee up to 125 MB/s.

Answer: C

NEW QUESTION 26
A customer has a company -wide power outage scheduled and needs to gracefully power off a 2-node cluster. In this scenario, which two steps should be performed? (Choose two.)

• A. Use the halt -node -skip-lif-migration-before-shutdown true -inhibit-takeover true command.
• B. Invoke and AutoSupport message to indicate aplanned maintenance time.
• C. Use the half -node * command
• D. Use OnCommand system Manager to half the controllers.

Answer: A,B

NEW QUESTION 27
What will be the result of adding all nine spare disks to the aggregate?

• A. The aggregate will have three RAID groups.
• B. You receive the "maximum number of raidgroups exceeded" error.
• C. The aggregate will have seven RAID groups.
• D. The aggregate will have five RAID groups.

Answer: D

NEW QUESTION 28
How many drive bays does a DS4246 shelf have?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

Explanation:
Explanation/Reference: https://www.insight.com/en_US/shop/product/DS4246074812AQSR6/NETAPP/DS4246-0748-
12A-QS-R6/NetAppStorageShelfDS4246-Storageenclosure-24bays(SAS-2)-HDD4TBx12-rack-mountable-
4U/

NEW QUESTION 29
Referring to the exhibit.

The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit.
However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error. In this scenario, which action will solve the error condition?

• A. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
• B. Associate a correct export policy to the root volume(/) of NewSVM.
• C. Configure the default route for NewSVM correctly.
• D. Stop and start NewSVM.

Answer: D

NEW QUESTION 30
What is the consequence of a loss of connectivity between a Cloud Volumes ONTAP (CVO) instance and Cloud Manager for four or more days?

• A. The CVO instance sends an AutoSupport message.
• B. The CVO instance is stopped.
• C. Cloud Manager removes the CVO instance from its inventory.
• D. The CVO instance must be added back manually to Cloud Manager.

Answer: C

NEW QUESTION 31
In clustered Data ONTAP, you just configured a new storage virtual machine (SVM) that SnapCenter Plug-in for Microsoft Windows needs to access to create Snapshot copies when running SnapManager for Microsoft Exchange Server.
However, when attempting to configure the SnapDrive transport protocol settings to communicate with the SVM, you receive the error shown in the exhibit.
Which three parameters are required in this scenario? (Choose three.)

• A. The data protocol is set to "none."
• B. The role is set to cluster.
• C. The SVM management LIF firewall policy is set to management.
• D. The SVM name resolves to the management LIF's IP address.
• E. The SVM name is the same as the CIFS server name when CIFS is enabled.

Answer: C,D

NEW QUESTION 32
......

NetApp NS0-194 Exam Topics:

Updated Network Appliance NS0-194 Dumps – PDF & Online Engine: https://www.free4torrent.com/NS0-194-braindumps-torrent.html